承台施工时,钢套箱浇筑封底混凝土,与钢管桩粘结在一起,二者之间的握裹效果决定了承台施工的成败。采用AN SY S中的子模型技术建立了握裹力模型,验算了各种工况下的握裹力,结果表明:封底混凝土1.0 m厚时,可以满足承台一次性浇筑要求;仅...承台施工时,钢套箱浇筑封底混凝土,与钢管桩粘结在一起,二者之间的握裹效果决定了承台施工的成败。采用AN SY S中的子模型技术建立了握裹力模型,验算了各种工况下的握裹力,结果表明:封底混凝土1.0 m厚时,可以满足承台一次性浇筑要求;仅有粘结应力作用时,可以保证二者间的有效结合;在桩周增设环形钢筋网片和剪力键后,握裹效果会要好。展开更多
The distribution of the suspended sediment concentration （SSC） in the Bohai Sea, Yellow Sea and East China Sea （BYECS） is studied based on the observed turbidity data and model simulation results. The observed tur...The distribution of the suspended sediment concentration （SSC） in the Bohai Sea, Yellow Sea and East China Sea （BYECS） is studied based on the observed turbidity data and model simulation results. The observed turbidity results show that （i） the highest SSC is found in the coastal areas while in the outer shelf sea areas turbid water is much more difficult to observe, （ii） the surface layer SSC is much lower than the bottom layer SSC and （iii） the winter SSC is higher than the summer SSC. The Regional Ocean Modeling System （ROMS） is used to simulate the SSC distribution in the BYECS. A comparison between the modeled SSC and the observed SSC in the BYECS shows that the modeled SSC can reproduce the principal features of tlte SSC distribution in the BYECS. The dynamic mechanisms of the sediment erosion and transport processes are studied based on the modeled results. The horizontal distribution of the SSC in the BYECS is mainly determined by the current-wave induced bottom stress and the fine-grain sediment distribution. The current-induced bottom stress is much higher than the wave-induced bottom stress, which means the tidal currents play a more significant role in the sediment resuspension than the wind waves. The vertical mixing strength is studied based on the mixed layer depth and the turbulent kinetic energy distribution in the BYECS. The strong winter time vertical mixing, which is mainly caused by the strong wind stress and surface cooling, leads to high surface layer SSC in winter. High surface layer SSC in summer is restricted in the coastal areas.展开更多
This paper presents a high-resolution (2′X2′) numerical model of coastalcoupled wave-current interaction with explicit consideration of the effects of wave-currentinteraction on bottom stress. For two selected storm...This paper presents a high-resolution (2′X2′) numerical model of coastalcoupled wave-current interaction with explicit consideration of the effects of wave-currentinteraction on bottom stress. For two selected storms with measured data in the Yellow River coastalarea of the Bohai Sea, it is shown that the bottom stress calculated by using a coupledwave-current model is increased, as one would expect, compared with the bottom stress computed withan uncoupled current model. Moreover, the current velocity field is also changed, but thecorresponding current directions show less influence in the two simulations. The extents of changesin bottom stress and current velocity vary with storm intensities. The results further imply thatthe coupled wave-current model should be used as the basis for simulating the current velocity andsea level in the near shore region.展开更多
As a typical nonlinear wave,forward-leaning waves can be frequently encountered in the near-shore areas,which can impact coastal sediment transport significantly.Hence,it is of significance to describe the characteris...As a typical nonlinear wave,forward-leaning waves can be frequently encountered in the near-shore areas,which can impact coastal sediment transport significantly.Hence,it is of significance to describe the characteristics of the boundary layer beneath forward-leaning waves accurately,especially for the turbulent boundary layer.In this work,the linearized turbulent boundary layer model with a linear turbulent viscosity coefficient is applied,and the novel expression of the near-bed orbital velocity that has been worked out by the authors for forward-leaning waves of arbitrary forward-leaning degrees is further used to specify the free stream boundary condition of the bottom boundary layer.Then,a variable transformation is found so as to make the equation of the turbulent boundary layer model be solved analytically through a modified Bessel function.Consequently,an explicit analytical solution of the turbulent boundary layer beneath forward-leaning waves is derived by means of variable separation and variable transformation.The analytical solutions of the velocity profile and bottom shear stress of the turbulent boundary layer beneath forward-leaning waves are verified by comparing the present analytical results with typical experimental data available in the previous literature.展开更多
The defects from electron transport layer,perovskite layer and their interface would result in carrier nonradiative recombination losses.Poor buried interfacial contact is detrimental to charge extraction and device s...The defects from electron transport layer,perovskite layer and their interface would result in carrier nonradiative recombination losses.Poor buried interfacial contact is detrimental to charge extraction and device stability.Here,we report a bottom-up holistic carrier management strategy induced synergistically by multiple chemical bonds to minimize bulk and interfacial energy losses for high-performance perovskite photovoltaics.4-trifluoromethyl-benzamidine hydrochloride(TBHCl)containing–CF_(3),amidine cation and Cl^(-)is in advance incorporated into SnO_(2)colloid solution to realize bottom-up modification.The synergistic effect of multiple functional groups and multiple-bond-induced chemical interaction are revealed theoretically and experimentally.F and Cl^(-)can passivate oxygen vacancy and/or undercoordinated Sn^(4+)defects by coordinating with Sn^(4+).The F can suppress cation migration and modulate crystallization via hydrogen bond with FA^(+),and can passivate lead defects by coordinating with Pb^(2+).The–NH_(2)–C=NH^(+)_(2)and Cl^(-)can passivate cation and anion vacancy defects through ionic bonds with perovskites,respectively.Through TBHCl modification,the suppression of agglomeration of SnO_(2)nanoparticles,bulk and interfacial defect passivation,and release of tensile strains of perovskite films are demonstrated,which resulted in a PCE enhancement from 21.28%to 23.40%and improved stability.With post-treatment,the efficiency is further improved to 23.63%.展开更多
文摘承台施工时,钢套箱浇筑封底混凝土,与钢管桩粘结在一起,二者之间的握裹效果决定了承台施工的成败。采用AN SY S中的子模型技术建立了握裹力模型,验算了各种工况下的握裹力,结果表明:封底混凝土1.0 m厚时,可以满足承台一次性浇筑要求;仅有粘结应力作用时,可以保证二者间的有效结合;在桩周增设环形钢筋网片和剪力键后,握裹效果会要好。
基金supported by the China Scholarship Council and the National Basic Research Program of China(973 Program 2010CB428904 and 2005CB422300)
文摘The distribution of the suspended sediment concentration （SSC） in the Bohai Sea, Yellow Sea and East China Sea （BYECS） is studied based on the observed turbidity data and model simulation results. The observed turbidity results show that （i） the highest SSC is found in the coastal areas while in the outer shelf sea areas turbid water is much more difficult to observe, （ii） the surface layer SSC is much lower than the bottom layer SSC and （iii） the winter SSC is higher than the summer SSC. The Regional Ocean Modeling System （ROMS） is used to simulate the SSC distribution in the BYECS. A comparison between the modeled SSC and the observed SSC in the BYECS shows that the modeled SSC can reproduce the principal features of tlte SSC distribution in the BYECS. The dynamic mechanisms of the sediment erosion and transport processes are studied based on the modeled results. The horizontal distribution of the SSC in the BYECS is mainly determined by the current-wave induced bottom stress and the fine-grain sediment distribution. The current-induced bottom stress is much higher than the wave-induced bottom stress, which means the tidal currents play a more significant role in the sediment resuspension than the wind waves. The vertical mixing strength is studied based on the mixed layer depth and the turbulent kinetic energy distribution in the BYECS. The strong winter time vertical mixing, which is mainly caused by the strong wind stress and surface cooling, leads to high surface layer SSC in winter. High surface layer SSC in summer is restricted in the coastal areas.
文摘This paper presents a high-resolution (2′X2′) numerical model of coastalcoupled wave-current interaction with explicit consideration of the effects of wave-currentinteraction on bottom stress. For two selected storms with measured data in the Yellow River coastalarea of the Bohai Sea, it is shown that the bottom stress calculated by using a coupledwave-current model is increased, as one would expect, compared with the bottom stress computed withan uncoupled current model. Moreover, the current velocity field is also changed, but thecorresponding current directions show less influence in the two simulations. The extents of changesin bottom stress and current velocity vary with storm intensities. The results further imply thatthe coupled wave-current model should be used as the basis for simulating the current velocity andsea level in the near shore region.
基金Project supported by the National Key R&D Program of China(No.2022YFC3204303)the National Natural Science Foundation of China(Nos.12202503,12132018,and 52394254)。
文摘As a typical nonlinear wave,forward-leaning waves can be frequently encountered in the near-shore areas,which can impact coastal sediment transport significantly.Hence,it is of significance to describe the characteristics of the boundary layer beneath forward-leaning waves accurately,especially for the turbulent boundary layer.In this work,the linearized turbulent boundary layer model with a linear turbulent viscosity coefficient is applied,and the novel expression of the near-bed orbital velocity that has been worked out by the authors for forward-leaning waves of arbitrary forward-leaning degrees is further used to specify the free stream boundary condition of the bottom boundary layer.Then,a variable transformation is found so as to make the equation of the turbulent boundary layer model be solved analytically through a modified Bessel function.Consequently,an explicit analytical solution of the turbulent boundary layer beneath forward-leaning waves is derived by means of variable separation and variable transformation.The analytical solutions of the velocity profile and bottom shear stress of the turbulent boundary layer beneath forward-leaning waves are verified by comparing the present analytical results with typical experimental data available in the previous literature.
基金financially supported by the Support Plan for Overseas Students to Return to China for Entrepreneurship and Innovation(cx2020003)the Fundamental Research Funds for the Central Universities(2020CDJ-LHZZ-074)the Natural Science Foundation of Chongqing(cstc2020jcyj-msxm X0629)。
文摘The defects from electron transport layer,perovskite layer and their interface would result in carrier nonradiative recombination losses.Poor buried interfacial contact is detrimental to charge extraction and device stability.Here,we report a bottom-up holistic carrier management strategy induced synergistically by multiple chemical bonds to minimize bulk and interfacial energy losses for high-performance perovskite photovoltaics.4-trifluoromethyl-benzamidine hydrochloride(TBHCl)containing–CF_(3),amidine cation and Cl^(-)is in advance incorporated into SnO_(2)colloid solution to realize bottom-up modification.The synergistic effect of multiple functional groups and multiple-bond-induced chemical interaction are revealed theoretically and experimentally.F and Cl^(-)can passivate oxygen vacancy and/or undercoordinated Sn^(4+)defects by coordinating with Sn^(4+).The F can suppress cation migration and modulate crystallization via hydrogen bond with FA^(+),and can passivate lead defects by coordinating with Pb^(2+).The–NH_(2)–C=NH^(+)_(2)and Cl^(-)can passivate cation and anion vacancy defects through ionic bonds with perovskites,respectively.Through TBHCl modification,the suppression of agglomeration of SnO_(2)nanoparticles,bulk and interfacial defect passivation,and release of tensile strains of perovskite films are demonstrated,which resulted in a PCE enhancement from 21.28%to 23.40%and improved stability.With post-treatment,the efficiency is further improved to 23.63%.
