Corona discharge is a common phenomenon in power transmission lines external insulation, and it may cause serious defect if without effective detection. The ultraviolet (UV) imagery technology has been widely used to ...Corona discharge is a common phenomenon in power transmission lines external insulation, and it may cause serious defect if without effective detection. The ultraviolet (UV) imagery technology has been widely used to detect the corona discharge in industry in recent years, but some influence factors’ functions are not definite. In this paper, the fracture aluminum strands which is common in power transmission lines were used as the electrode model while a SuperB ultraviolet imager were utilized to detect, the photon count rate was detected with different detect distance, electric field, aluminum strands length and UV gain were applied. Then the multivariate regression analysis (MRA) was taken to calculate the function between the photon count and the factors.展开更多
Due to the bandwidth limitation of the ultraviolet-C(UV-C) optical communication system and strong channel attenuation, it is difficult to transmit high-frequency signals. In this paper, the temporal ghost imaging(TGI...Due to the bandwidth limitation of the ultraviolet-C(UV-C) optical communication system and strong channel attenuation, it is difficult to transmit high-frequency signals. In this paper, the temporal ghost imaging(TGI) algorithm was first applied to the UV-C communication experimentally, and we realized the transmission of a 4 GHz signal through 95.34 MHz system bandwidth. The study indicates that the TGI algorithm can significantly improve the signal-to-noise ratio(SNR) compared with the on–off keying method. Our research provides a new approach for alleviating transmission frequency limitation due to poor SNR and insufficient hardware bandwidth.展开更多
The structural characteristics and optical and electrical properties of molecular-beam-epitaxy (MBE) grown ZnS0.8Se0.2 thin films on indium-tin-oxide (ITO) glass substrates were investigated in this work. The X-ray di...The structural characteristics and optical and electrical properties of molecular-beam-epitaxy (MBE) grown ZnS0.8Se0.2 thin films on indium-tin-oxide (ITO) glass substrates were investigated in this work. The X-ray diffraction (XRD) results indicated that high quality polycrystalline ZnS0.8Se0.2 thin film grown at the optimized temperature had a preferred orientation along the (111) planes. The transmission electron microscopy (TEM) cross-sectional micrograph of the sample showed a well defined columnar structure with lateral crystal dimension in the order of a few hundred angstroms. Ultraviolet(UV) photoresponsivity as high as 0.01 A/W had been demonstrated and for wavelengths longer than 450 nm, the response was down from the peak response by more than 3 orders of magnitude. The thin ZnS0.8Se0,2 photosensor layer, with a wide energy gap and anisotropic electrical property, makes a transmission UV liquid crystal light valve (LCLV) with high resolution feasible.展开更多
文摘Corona discharge is a common phenomenon in power transmission lines external insulation, and it may cause serious defect if without effective detection. The ultraviolet (UV) imagery technology has been widely used to detect the corona discharge in industry in recent years, but some influence factors’ functions are not definite. In this paper, the fracture aluminum strands which is common in power transmission lines were used as the electrode model while a SuperB ultraviolet imager were utilized to detect, the photon count rate was detected with different detect distance, electric field, aluminum strands length and UV gain were applied. Then the multivariate regression analysis (MRA) was taken to calculate the function between the photon count and the factors.
基金This work was supported by the National Natural Science Foundation of China(NSFC)(Nos.61974031 and 61705041)Fudan University-CIOMP Joint Fund(No.FC2020-001)Shanghai Technical Standard Program(No.18DZ2206000).
文摘Due to the bandwidth limitation of the ultraviolet-C(UV-C) optical communication system and strong channel attenuation, it is difficult to transmit high-frequency signals. In this paper, the temporal ghost imaging(TGI) algorithm was first applied to the UV-C communication experimentally, and we realized the transmission of a 4 GHz signal through 95.34 MHz system bandwidth. The study indicates that the TGI algorithm can significantly improve the signal-to-noise ratio(SNR) compared with the on–off keying method. Our research provides a new approach for alleviating transmission frequency limitation due to poor SNR and insufficient hardware bandwidth.
基金Project supported by the National Natural Science Foundation of China (No. 59910161981) and RGC grant from the Hong Kong Government Grant (No. NSFC/HKUST 35) China
文摘The structural characteristics and optical and electrical properties of molecular-beam-epitaxy (MBE) grown ZnS0.8Se0.2 thin films on indium-tin-oxide (ITO) glass substrates were investigated in this work. The X-ray diffraction (XRD) results indicated that high quality polycrystalline ZnS0.8Se0.2 thin film grown at the optimized temperature had a preferred orientation along the (111) planes. The transmission electron microscopy (TEM) cross-sectional micrograph of the sample showed a well defined columnar structure with lateral crystal dimension in the order of a few hundred angstroms. Ultraviolet(UV) photoresponsivity as high as 0.01 A/W had been demonstrated and for wavelengths longer than 450 nm, the response was down from the peak response by more than 3 orders of magnitude. The thin ZnS0.8Se0,2 photosensor layer, with a wide energy gap and anisotropic electrical property, makes a transmission UV liquid crystal light valve (LCLV) with high resolution feasible.
