Microstructure and variations in porosity in Ti-6Al-4V samples built with electron beam melting (EBM) over a range of melt scan speeds, ranging from 100 mm·s-1 to 1000 mm·s-1 were examined. Microstructure wa...Microstructure and variations in porosity in Ti-6Al-4V samples built with electron beam melting (EBM) over a range of melt scan speeds, ranging from 100 mm·s-1 to 1000 mm·s-1 were examined. Microstructure was characterized by refinement of α-phase and transformation to α′-martensite. Light optical microscopy, scanning electron microscopy, and transmission electron microscopy were used to observe these phenomena, while corresponding tensile testing and associated macro and microindentation hardness measurements were used to define the microstructural variations. Relative stiffness was observed to be linearly log-log related to relative density, corresponding to ideal porosity associated with open-cellular structures.展开更多
Polarizable electrodes of electric double layer capacitors(EDLCs) were made from carbon nanotubes(CNTs).Effect of carbon dioxide activation together with acid oxidation for the electrodes on the characteristics and pe...Polarizable electrodes of electric double layer capacitors(EDLCs) were made from carbon nanotubes(CNTs).Effect of carbon dioxide activation together with acid oxidation for the electrodes on the characteristics and performances of electrodes and EDLCs was studied.Carbon dioxide activation changed the microstructure of the electrodes,increased the effective surface area of CNTs and optimized the distribution of apertures of the electrodes.Acid oxidization modified the surface characteristics of CNTs.Based on the polarizable electrodes treated by carbon dioxide activation and acid oxidization,the performances of EDLCs were greatly enhanced.The specific capacitance of the electrodes with organic electrolyte was increased from 21.8 F/g to 60.4 F/g.展开更多
目的观察三种粘结材料的封闭性能,为折裂牙选择合适的粘结材料提供试验依据。方法选用健康前磨牙30颗,随机分为3组,制备成后牙纵折模型,分别用Clearfil SE Bond/AP-X(A组)、Super-Bond C&B(B组),Single Bond/F2000Cmpomer(C组)进行...目的观察三种粘结材料的封闭性能,为折裂牙选择合适的粘结材料提供试验依据。方法选用健康前磨牙30颗,随机分为3组,制备成后牙纵折模型,分别用Clearfil SE Bond/AP-X(A组)、Super-Bond C&B(B组),Single Bond/F2000Cmpomer(C组)进行粘结,在0.5%亚甲基蓝溶液中染色72h后,在电镜下观察染料渗透深度。结果扫描电镜下观察各组标本的粘结界面均有染料渗入,经单因素方差分析,A组与B组、C组有显著性差异,B组与C组之间无显著性差异。结论Clearfil SE Bond的封闭性能优于其它两组,但三种粘结剂均无法避免微渗漏的发生。展开更多
Titanium is one of the best hydrogen loading material. The pre dieted maximum loading ratio of hydrogen in titanium may reach to 2.0. In this work, a titanium layer on molybdenum substrate was deuterated with the atom...Titanium is one of the best hydrogen loading material. The pre dieted maximum loading ratio of hydrogen in titanium may reach to 2.0. In this work, a titanium layer on molybdenum substrate was deuterated with the atomic: ratio X =2H/Ti≥1.6. The change of the surface topography and rnicrostructurc of the sample before and after loading was observed by using Scan Electron Microscopy (SEM). The surface segregation of the samples after deutcron bombardment was also observed. A fluctuatingly-incrcasing trend of the deutcriuin density in titanium target was detected in the deuteron implantation experiments. which indicated a suddenly explosion (segregation) or fast diffusion of deuterium in the titanium. Significant amount of nitrogen contamination was found in thc Ti2Hx sample by nuclear reaction analysis (NRA), which indicated that the Ti2Hx structure might have the feature to trap nitrogen from air. The nitrogen contamination in Ti2Hx significantly affects the increase of the atomic ratio X展开更多
Rock mass is fractured media. Its fracture is a nonlinear process. Theaccumulation of acoustic emission (AF) is closely related to the degree of damage. The dynamicsproblem is simply described based on the non-equilib...Rock mass is fractured media. Its fracture is a nonlinear process. Theaccumulation of acoustic emission (AF) is closely related to the degree of damage. The dynamicsproblem is simply described based on the non-equilibrium statistical theory of crack evolvement,trying to use the hybrid analysis of the statistical theory and scan electron microscopy (SEM), thecharacters of AE signals from rock damage in a mined-out area is synthetically analyzed andevaluated. These provide an evidence to reverse deduce and accurately infer the position of rockfracture for dynamical hazard control.展开更多
文摘Microstructure and variations in porosity in Ti-6Al-4V samples built with electron beam melting (EBM) over a range of melt scan speeds, ranging from 100 mm·s-1 to 1000 mm·s-1 were examined. Microstructure was characterized by refinement of α-phase and transformation to α′-martensite. Light optical microscopy, scanning electron microscopy, and transmission electron microscopy were used to observe these phenomena, while corresponding tensile testing and associated macro and microindentation hardness measurements were used to define the microstructural variations. Relative stiffness was observed to be linearly log-log related to relative density, corresponding to ideal porosity associated with open-cellular structures.
基金supported by the Major State Basic Research Development Program of China (Grant No.10332020)
文摘Polarizable electrodes of electric double layer capacitors(EDLCs) were made from carbon nanotubes(CNTs).Effect of carbon dioxide activation together with acid oxidation for the electrodes on the characteristics and performances of electrodes and EDLCs was studied.Carbon dioxide activation changed the microstructure of the electrodes,increased the effective surface area of CNTs and optimized the distribution of apertures of the electrodes.Acid oxidization modified the surface characteristics of CNTs.Based on the polarizable electrodes treated by carbon dioxide activation and acid oxidization,the performances of EDLCs were greatly enhanced.The specific capacitance of the electrodes with organic electrolyte was increased from 21.8 F/g to 60.4 F/g.
文摘目的观察三种粘结材料的封闭性能,为折裂牙选择合适的粘结材料提供试验依据。方法选用健康前磨牙30颗,随机分为3组,制备成后牙纵折模型,分别用Clearfil SE Bond/AP-X(A组)、Super-Bond C&B(B组),Single Bond/F2000Cmpomer(C组)进行粘结,在0.5%亚甲基蓝溶液中染色72h后,在电镜下观察染料渗透深度。结果扫描电镜下观察各组标本的粘结界面均有染料渗入,经单因素方差分析,A组与B组、C组有显著性差异,B组与C组之间无显著性差异。结论Clearfil SE Bond的封闭性能优于其它两组,但三种粘结剂均无法避免微渗漏的发生。
基金Supported by a fund of the Chinese Academy of Sciences the special fund of the Nuclear Power Institute of China
文摘Titanium is one of the best hydrogen loading material. The pre dieted maximum loading ratio of hydrogen in titanium may reach to 2.0. In this work, a titanium layer on molybdenum substrate was deuterated with the atomic: ratio X =2H/Ti≥1.6. The change of the surface topography and rnicrostructurc of the sample before and after loading was observed by using Scan Electron Microscopy (SEM). The surface segregation of the samples after deutcron bombardment was also observed. A fluctuatingly-incrcasing trend of the deutcriuin density in titanium target was detected in the deuteron implantation experiments. which indicated a suddenly explosion (segregation) or fast diffusion of deuterium in the titanium. Significant amount of nitrogen contamination was found in thc Ti2Hx sample by nuclear reaction analysis (NRA), which indicated that the Ti2Hx structure might have the feature to trap nitrogen from air. The nitrogen contamination in Ti2Hx significantly affects the increase of the atomic ratio X
基金This work was financially supported by the Natural Science Foundation of Shannxi Province (No.2003E_213 )the Doctoral Foundation of the Ministry of Education of China (No.20020008021)the National Natural Science Foundation of China (No.50074002)
文摘Rock mass is fractured media. Its fracture is a nonlinear process. Theaccumulation of acoustic emission (AF) is closely related to the degree of damage. The dynamicsproblem is simply described based on the non-equilibrium statistical theory of crack evolvement,trying to use the hybrid analysis of the statistical theory and scan electron microscopy (SEM), thecharacters of AE signals from rock damage in a mined-out area is synthetically analyzed andevaluated. These provide an evidence to reverse deduce and accurately infer the position of rockfracture for dynamical hazard control.
