以16.7%(质量分数)的柠檬酸水溶液作溶剂,通过粒子沥滤法制备了 n HA/CS多孔材料,并对其进行了IR、XRD、SEM、孔隙率及力学性能测试。结果表明n HA/CS复合材料中羟基磷灰石呈弱结晶状态,复合前后两组分的化学组成未发生显著变化,但两相...以16.7%(质量分数)的柠檬酸水溶液作溶剂,通过粒子沥滤法制备了 n HA/CS多孔材料,并对其进行了IR、XRD、SEM、孔隙率及力学性能测试。结果表明n HA/CS复合材料中羟基磷灰石呈弱结晶状态,复合前后两组分的化学组成未发生显著变化,但两相间发生了相互作用。多孔材料呈高度多孔结构,孔壁上富含微孔,孔间贯通性高;复合材料/致孔剂质量比为1时,多孔材料的孔隙率为 53%,其抗压强度可达17 MPa左右,可以满足组织工程支架材料的要求。展开更多
将具有传骨性的生物可吸收无机材料硫酸钙与具有诱骨性的明胶组合起来,构制新型可吸收复合生物材料。该材料可避免硫酸钙颗粒的脱落,可以作为骨填充物或支架材料。明胶的加入减缓了半水硫酸钙向二水硫酸钙的转化,形成了CSH/CSD/CLG e l...将具有传骨性的生物可吸收无机材料硫酸钙与具有诱骨性的明胶组合起来,构制新型可吸收复合生物材料。该材料可避免硫酸钙颗粒的脱落,可以作为骨填充物或支架材料。明胶的加入减缓了半水硫酸钙向二水硫酸钙的转化,形成了CSH/CSD/CLG e l复合材料。在该复合材料表面培养了人成骨细胞,细胞在支架表面粘附良好,可见该支架和细胞有较好的生物相容性。硫酸钙吸收后形成一可供细胞生长的多孔支架,所以明胶/硫酸钙(CLG e l/CS)复合材料实为原位成孔支架材料,解决了多孔支架材料初期强度低的致命弱点。展开更多
Zn based metals have exhibited promising prospects as a structural material for biodegradable applications. Pure Zn porous scaffolds were produced by laser powder bed fusion(LPBF) based on data files of designing and ...Zn based metals have exhibited promising prospects as a structural material for biodegradable applications. Pure Zn porous scaffolds were produced by laser powder bed fusion(LPBF) based on data files of designing and CT scanning. Massive Zn evaporation during laser melting largely influenced the formation quality during LPBF of Zn metal. The metal vapor in processing chamber was blown off and suctioned out efficiently by an optimized gas circulation system. Numerical analysis was used to design and testify the performance of gas flow. The surface of scaffolds was covered with numerous particles in different sizes. Processing pores occurred near the outline contour of struts. The average grain size in width was8.5m, and the hardness was 43.8 HV. Chemical plus electrochemical polishing obtained uniform and smooth surface without processing pores, but the diameter of struts reduced to 250 αm from the design value 300 m. The poor surface quality and processing pores were resulted by the splashing particles included spatters and powders due to the recoil force of evaporation, and the horizontal movement of liquid metal due to overheating and wetting. The insufficient melting at the outline contour combined with good wetting of Zn liquid metal further increased the surface roughness and processing pores.展开更多
For large segmental bone defects,porous titanium scaffolds have some advantages,however,they lack electrical activity which hinders their further use.In this study,a barium titanate(BaTiO3)piezoelectric ceramic was us...For large segmental bone defects,porous titanium scaffolds have some advantages,however,they lack electrical activity which hinders their further use.In this study,a barium titanate(BaTiO3)piezoelectric ceramic was used to modify the surface of a porous Ti6Al4V scaffold(pTi),which was characterized by scanning electron microscopy,energy dispersive spectroscopy,X-ray photoelectron spectroscopy,and roughness and water contact angle analyses.Low intensity pulsed ultrasound(LIPUS)was applied in vitro and in vivo study.The activity of bone marrow mesenchymal stem cells,including adhesion,proliferation,and gene expression,was significantly superior in the BaTiO3/pTi,pTi+LIPUS,and BaTiO3/pTi+LIPUS groups than in the pTi group.The activity was also higher in the BaTiO3/pTi+LIPUS group than in the BaTiO3/pTi and pTi+LIPUS groups.Additionally,micro-computed tomography,the mineral apposition rate,histomorphology,and the peak pull-out load showed that these scaffold conditions significantly enhanced osteogenesis and osseointegration 6 and 12 weeks after implantation in large segmental bone defects in the radius of rabbits compared with those resulting from the pTi condition.Consequently,the improved osteogenesis and osseointegration make the BaTiO3/pTi+LIPUS a promising method to promote bone regeneration in large segmental bone defects for clinical application.展开更多
An appropriate cell microenvironment is key to tissue engineering and regenerative medicine.Revealing the factors that influence the cell microenvironment is a fundamental research topic in the fields of cell biology,...An appropriate cell microenvironment is key to tissue engineering and regenerative medicine.Revealing the factors that influence the cell microenvironment is a fundamental research topic in the fields of cell biology,biomaterials,tissue engineering,and regenerative medicine.The cell microenvironment consists of not only its surrounding cells and soluble factors,but also its extracellular matrix(ECM)or nearby external biomaterials in tissue engineering and regeneration.This review focuses on six aspects of bioma-terial-related cell microenvironments:①chemical composition of materials,②material dimensions and architecture,③material-controlled cell geometry,④effects of material charges on cells,⑤matrix stiff-ness and biomechanical microenvironment,and⑥surface modification of materials.The present chal-lenges in tissue engineering are also mentioned,and eight perspectives are predicted.展开更多
文摘将具有传骨性的生物可吸收无机材料硫酸钙与具有诱骨性的明胶组合起来,构制新型可吸收复合生物材料。该材料可避免硫酸钙颗粒的脱落,可以作为骨填充物或支架材料。明胶的加入减缓了半水硫酸钙向二水硫酸钙的转化,形成了CSH/CSD/CLG e l复合材料。在该复合材料表面培养了人成骨细胞,细胞在支架表面粘附良好,可见该支架和细胞有较好的生物相容性。硫酸钙吸收后形成一可供细胞生长的多孔支架,所以明胶/硫酸钙(CLG e l/CS)复合材料实为原位成孔支架材料,解决了多孔支架材料初期强度低的致命弱点。
基金supported by National Natural Science Foundation of China (51875310)National Key R&D Program of China (2017YFB1103300)
文摘Zn based metals have exhibited promising prospects as a structural material for biodegradable applications. Pure Zn porous scaffolds were produced by laser powder bed fusion(LPBF) based on data files of designing and CT scanning. Massive Zn evaporation during laser melting largely influenced the formation quality during LPBF of Zn metal. The metal vapor in processing chamber was blown off and suctioned out efficiently by an optimized gas circulation system. Numerical analysis was used to design and testify the performance of gas flow. The surface of scaffolds was covered with numerous particles in different sizes. Processing pores occurred near the outline contour of struts. The average grain size in width was8.5m, and the hardness was 43.8 HV. Chemical plus electrochemical polishing obtained uniform and smooth surface without processing pores, but the diameter of struts reduced to 250 αm from the design value 300 m. The poor surface quality and processing pores were resulted by the splashing particles included spatters and powders due to the recoil force of evaporation, and the horizontal movement of liquid metal due to overheating and wetting. The insufficient melting at the outline contour combined with good wetting of Zn liquid metal further increased the surface roughness and processing pores.
基金supported by grants from the National Key Research and Development Program of China(grant number 2017YFC1104901)to Zheng Guothe National Natural Science Foundation of China(grant number 51771227)to Zheng Guo+2 种基金the Youth Development Program of Chinese People's Liberation Army(No.20QNPY069)to Bo Fanthe National Natural Science Foundation of China(No.31800812)to Bo Fanthe National Natural Science Foundation of China(grant number 51771227)to Zheng Guo.
文摘For large segmental bone defects,porous titanium scaffolds have some advantages,however,they lack electrical activity which hinders their further use.In this study,a barium titanate(BaTiO3)piezoelectric ceramic was used to modify the surface of a porous Ti6Al4V scaffold(pTi),which was characterized by scanning electron microscopy,energy dispersive spectroscopy,X-ray photoelectron spectroscopy,and roughness and water contact angle analyses.Low intensity pulsed ultrasound(LIPUS)was applied in vitro and in vivo study.The activity of bone marrow mesenchymal stem cells,including adhesion,proliferation,and gene expression,was significantly superior in the BaTiO3/pTi,pTi+LIPUS,and BaTiO3/pTi+LIPUS groups than in the pTi group.The activity was also higher in the BaTiO3/pTi+LIPUS group than in the BaTiO3/pTi and pTi+LIPUS groups.Additionally,micro-computed tomography,the mineral apposition rate,histomorphology,and the peak pull-out load showed that these scaffold conditions significantly enhanced osteogenesis and osseointegration 6 and 12 weeks after implantation in large segmental bone defects in the radius of rabbits compared with those resulting from the pTi condition.Consequently,the improved osteogenesis and osseointegration make the BaTiO3/pTi+LIPUS a promising method to promote bone regeneration in large segmental bone defects for clinical application.
基金the financial support from the National Natural Science Foundation of China (21961160721 and 52130302)the National Key Research and Development Program of China(2016YFC1100300)
文摘An appropriate cell microenvironment is key to tissue engineering and regenerative medicine.Revealing the factors that influence the cell microenvironment is a fundamental research topic in the fields of cell biology,biomaterials,tissue engineering,and regenerative medicine.The cell microenvironment consists of not only its surrounding cells and soluble factors,but also its extracellular matrix(ECM)or nearby external biomaterials in tissue engineering and regeneration.This review focuses on six aspects of bioma-terial-related cell microenvironments:①chemical composition of materials,②material dimensions and architecture,③material-controlled cell geometry,④effects of material charges on cells,⑤matrix stiff-ness and biomechanical microenvironment,and⑥surface modification of materials.The present chal-lenges in tissue engineering are also mentioned,and eight perspectives are predicted.
