A accelerated arithmetic algorithm of the dynamic computing regions was designed,and 3-dimensional numerical simulation of isothermal solidification for a binary alloy was implemented.The dendritic growth and the reca...A accelerated arithmetic algorithm of the dynamic computing regions was designed,and 3-dimensional numerical simulation of isothermal solidification for a binary alloy was implemented.The dendritic growth and the recalescence of Ni-Cu binary alloy during the solidification at different cooling rates were investigated.The effects of cooling rate on dendritic patterns and microsegregation patterns were studied.The computed results indicate that,with the increment of the cooling rate,the dendritic growth velocity increases,both the main branch and side-branches become slender,the secondary dendrite arm spacing becomes smaller,the inadequate solute diffusion in solid aggravates,and the severity of microsegregation ahead of interface aggravates.At a higher cooling rate,the binary alloy presents recalescence;while the cooling rate is small,no recalescence occurs.展开更多
Phase-field modeling approach has been used to study the oxidation behavior of pure Ni when considering heat conduction. In this calculation, the dependence of the coefficient of the Cahn–Hilliard equation Lc on the ...Phase-field modeling approach has been used to study the oxidation behavior of pure Ni when considering heat conduction. In this calculation, the dependence of the coefficient of the Cahn–Hilliard equation Lc on the temperature T was considered. To this end, high-temperature oxidation experiments and phase-field modeling for pure Ni were performed in air under atmospheric pressure at 600,700, and 800？C. The oxidation rate was measured by thermogravimetry and Lc at these temperatures was determined via interactive algorithm. With the Lc-T relationship constructed, oxidation behavior of Ni when considering heat conduction was investigated. The influence of temperature boundaries on the oxidation degree, oxide film thickness, and specific weight gain were discussed. The phase-field modeling approach proposed in this study will give some highlights of the oxidation resistance analysis and cooling measures design of thermal protection materials.展开更多
The influence of various material and computational parameters such as interface kinetic coefficient(β), surface energy(σ), anisotropy parameter(γ) and the noise amplitude(α) upon microsegregation patterns during ...The influence of various material and computational parameters such as interface kinetic coefficient(β), surface energy(σ), anisotropy parameter(γ) and the noise amplitude(α) upon microsegregation patterns during the crystal growth was investigated by using the phase-field model which incorporated the concentration field equations. The computed results indicate that, when the appropriate value is assigned to α, the fluctuant scope of solute composition in the solid is steady, and the influence of α on microsegregation is small; the larger the interface kinetic coefficient β, the more acutely the solute composition in the solid fluctuates, but the severity of microsegregation in the front interface reduces; with the increment of anisotropy parameter γ, the fluctuation of solute composition in the solid becomes more acutely, and the severity of microsegregation in the front interface aggravates; the larger surface energy σ, the smaller the fluctuant scope of solute composition in the solid is, and the smaller the degree of microsegregation is.展开更多
Phase field description of fracture is a very promising approach for simulating crack initiation, propagation, merging and branching. This method greatly reduces the implementation complexity, compared with discrete d...Phase field description of fracture is a very promising approach for simulating crack initiation, propagation, merging and branching. This method greatly reduces the implementation complexity, compared with discrete descriptions of cracks. In this work, we provide an overview of phase field models for quasistatic and dynamic cases. Afterward, we present useful vectors and matrices for the implementation of this method in two and three dimensions.展开更多
基金Project(10964004)supported by the National Natural Science Foundation of ChinaProject(20070231001)supported by Research Fund for the Doctoral Program of Higher Education of China+1 种基金Project(096RJZA104)supported by the Natural Science Foundation of Gansu Province,ChinaProject(SB14200801)supported by the Doctoral Fund of Lanzhou University of Technology
文摘A accelerated arithmetic algorithm of the dynamic computing regions was designed,and 3-dimensional numerical simulation of isothermal solidification for a binary alloy was implemented.The dendritic growth and the recalescence of Ni-Cu binary alloy during the solidification at different cooling rates were investigated.The effects of cooling rate on dendritic patterns and microsegregation patterns were studied.The computed results indicate that,with the increment of the cooling rate,the dendritic growth velocity increases,both the main branch and side-branches become slender,the secondary dendrite arm spacing becomes smaller,the inadequate solute diffusion in solid aggravates,and the severity of microsegregation ahead of interface aggravates.At a higher cooling rate,the binary alloy presents recalescence;while the cooling rate is small,no recalescence occurs.
基金supported by the Beijing Jiaotong University (Grant C15JB00080)
文摘Phase-field modeling approach has been used to study the oxidation behavior of pure Ni when considering heat conduction. In this calculation, the dependence of the coefficient of the Cahn–Hilliard equation Lc on the temperature T was considered. To this end, high-temperature oxidation experiments and phase-field modeling for pure Ni were performed in air under atmospheric pressure at 600,700, and 800？C. The oxidation rate was measured by thermogravimetry and Lc at these temperatures was determined via interactive algorithm. With the Lc-T relationship constructed, oxidation behavior of Ni when considering heat conduction was investigated. The influence of temperature boundaries on the oxidation degree, oxide film thickness, and specific weight gain were discussed. The phase-field modeling approach proposed in this study will give some highlights of the oxidation resistance analysis and cooling measures design of thermal protection materials.
基金Project(50005011) supported by the National Natural Science Foundation of China Project(2003AA4Z1070) supported by the National High-Tech Research and Development Program of China
文摘The influence of various material and computational parameters such as interface kinetic coefficient(β), surface energy(σ), anisotropy parameter(γ) and the noise amplitude(α) upon microsegregation patterns during the crystal growth was investigated by using the phase-field model which incorporated the concentration field equations. The computed results indicate that, when the appropriate value is assigned to α, the fluctuant scope of solute composition in the solid is steady, and the influence of α on microsegregation is small; the larger the interface kinetic coefficient β, the more acutely the solute composition in the solid fluctuates, but the severity of microsegregation in the front interface reduces; with the increment of anisotropy parameter γ, the fluctuation of solute composition in the solid becomes more acutely, and the severity of microsegregation in the front interface aggravates; the larger surface energy σ, the smaller the fluctuant scope of solute composition in the solid is, and the smaller the degree of microsegregation is.
基金the National Natural Science Foundation of China(No.11402146)the Young 1000 Talent Program of China
文摘Phase field description of fracture is a very promising approach for simulating crack initiation, propagation, merging and branching. This method greatly reduces the implementation complexity, compared with discrete descriptions of cracks. In this work, we provide an overview of phase field models for quasistatic and dynamic cases. Afterward, we present useful vectors and matrices for the implementation of this method in two and three dimensions.
