The microstructure and mechanical properties of A1-4.5wt% Cu Mloy reinforced with different volume fractions （1.5vo1%, 3vo1%, and 5vo1%） of alumina nanoparticles, fabricated using stir casting method, were investiga...The microstructure and mechanical properties of A1-4.5wt% Cu Mloy reinforced with different volume fractions （1.5vo1%, 3vo1%, and 5vo1%） of alumina nanoparticles, fabricated using stir casting method, were investigated. CMculated amounts of alumina nanoparticles （about ~50 nm in size） were ball-milled with aluminum powders in a planetary ball mill for 5 h, and then the packets of milled powders were incorporated into molten Al-4.5wt% Cu alloy. Microstructural studies of the nanocomposites reveal a uniform distribution of alumina nanoparticles in the A1-4.5wt% Cu matrix. The results indicate an outstanding improvement in compression strength and hardness due to the effect of nanoparticle addition. The aging behavior of the composite is also evaluated, indicating that the addition of alumina nanoparticles can accelerate the aging process of the Mloy, resulting in higher peak hardness values.展开更多
TiO2-hydroxyapatite （HA） nanostructured coatings were produced by atmospheric plasma spray method. The effects of starting powder composition and grain size on their mechanical properties were investigated. The micr...TiO2-hydroxyapatite （HA） nanostructured coatings were produced by atmospheric plasma spray method. The effects of starting powder composition and grain size on their mechanical properties were investigated. The microstructure and morphology were characterized by X-ray diffraction and scanning electron microscopy （SEM）. It is found that the coating with 10% HA has the best mechanical properties. Based on Rietveld refinement method, the mean grain size of the as-received powder （212 nm） extensively decreases to 66.4 nm after 20 h of high-energy ball milling. In spite of grain growth, the deposited coatings maintain their nanostructures with the mean grain size of 112 nm. SEM images show that there is a lower porosity in the coating with a higher HA content. Optical microscopy images show that uniform thickness is obtained for all the coatings.展开更多
The preparation and some mechanical, thermal and magnetic properties of the as cast bulk composite Fe72B19.2Sin.sM4 （M=Nb, Mo） alloys obtained by suction casting are presented and discussed. The microstructrural res...The preparation and some mechanical, thermal and magnetic properties of the as cast bulk composite Fe72B19.2Sin.sM4 （M=Nb, Mo） alloys obtained by suction casting are presented and discussed. The microstructrural results showed the existence of a crystalline a-Fe（Si） phase embedded in a glassy matrix. The values of microhardness （/Iv） and yield strength （ay） for the Nb-containing alloy are exceptionally high, i.e. （12.65~0.3） GPa and （4.22~0.10） GPa, respectively. The saturation polarization values are found to be as high as 1.24 T for both composite ~11oys. It is thought that the interplay between the secondary crystalline phases and amorphous matrix could be responsible for the mechanical and magnetic behaviour of these alloys.展开更多
Polysulfone （PSf） membranes were modified by either a new organic modifier （sulfonated poly（ether sulfide sulfone）, SPESS） or a traditional modifier （rice hulk）. These membranes were further reinforced with ei...Polysulfone （PSf） membranes were modified by either a new organic modifier （sulfonated poly（ether sulfide sulfone）, SPESS） or a traditional modifier （rice hulk）. These membranes were further reinforced with either multi-walled carbon nanotubes （MWCNTs） or silica nanoparticles. Having a dye rejection of 98.46%, the reinforced membranes increased more than 50% in strength but no change in solution flux was observed. The morphological and roughness studies were conducted using scanning electron microscopy and atomic force microscopy. Moreover, the PSF membranes were also characterized by differential scanning calorimetry. Modifying the membranes with organic modifier or nanofiller increases the glass transition temperature （Tg）. The highest Tg and strength were observed for the PSf-SPESS- MWCNT membrane. SPESS decreases surface roughness but MWCNT increases roughness on the nanoscale. All membranes show a bimodal pore size distribution, whereas the PSf-SPESS-MWCNT membrane exhibits a relatively uniform distribution of macroscopic and microscopic pores.展开更多
文摘The microstructure and mechanical properties of A1-4.5wt% Cu Mloy reinforced with different volume fractions （1.5vo1%, 3vo1%, and 5vo1%） of alumina nanoparticles, fabricated using stir casting method, were investigated. CMculated amounts of alumina nanoparticles （about ~50 nm in size） were ball-milled with aluminum powders in a planetary ball mill for 5 h, and then the packets of milled powders were incorporated into molten Al-4.5wt% Cu alloy. Microstructural studies of the nanocomposites reveal a uniform distribution of alumina nanoparticles in the A1-4.5wt% Cu matrix. The results indicate an outstanding improvement in compression strength and hardness due to the effect of nanoparticle addition. The aging behavior of the composite is also evaluated, indicating that the addition of alumina nanoparticles can accelerate the aging process of the Mloy, resulting in higher peak hardness values.
文摘TiO2-hydroxyapatite （HA） nanostructured coatings were produced by atmospheric plasma spray method. The effects of starting powder composition and grain size on their mechanical properties were investigated. The microstructure and morphology were characterized by X-ray diffraction and scanning electron microscopy （SEM）. It is found that the coating with 10% HA has the best mechanical properties. Based on Rietveld refinement method, the mean grain size of the as-received powder （212 nm） extensively decreases to 66.4 nm after 20 h of high-energy ball milling. In spite of grain growth, the deposited coatings maintain their nanostructures with the mean grain size of 112 nm. SEM images show that there is a lower porosity in the coating with a higher HA content. Optical microscopy images show that uniform thickness is obtained for all the coatings.
文摘The preparation and some mechanical, thermal and magnetic properties of the as cast bulk composite Fe72B19.2Sin.sM4 （M=Nb, Mo） alloys obtained by suction casting are presented and discussed. The microstructrural results showed the existence of a crystalline a-Fe（Si） phase embedded in a glassy matrix. The values of microhardness （/Iv） and yield strength （ay） for the Nb-containing alloy are exceptionally high, i.e. （12.65~0.3） GPa and （4.22~0.10） GPa, respectively. The saturation polarization values are found to be as high as 1.24 T for both composite ~11oys. It is thought that the interplay between the secondary crystalline phases and amorphous matrix could be responsible for the mechanical and magnetic behaviour of these alloys.
文摘Polysulfone （PSf） membranes were modified by either a new organic modifier （sulfonated poly（ether sulfide sulfone）, SPESS） or a traditional modifier （rice hulk）. These membranes were further reinforced with either multi-walled carbon nanotubes （MWCNTs） or silica nanoparticles. Having a dye rejection of 98.46%, the reinforced membranes increased more than 50% in strength but no change in solution flux was observed. The morphological and roughness studies were conducted using scanning electron microscopy and atomic force microscopy. Moreover, the PSF membranes were also characterized by differential scanning calorimetry. Modifying the membranes with organic modifier or nanofiller increases the glass transition temperature （Tg）. The highest Tg and strength were observed for the PSf-SPESS- MWCNT membrane. SPESS decreases surface roughness but MWCNT increases roughness on the nanoscale. All membranes show a bimodal pore size distribution, whereas the PSf-SPESS-MWCNT membrane exhibits a relatively uniform distribution of macroscopic and microscopic pores.
