The effect of preparation method on the properties of alumina modified by La2O3 and BaO was investigated by means of Low temperature nitrogen adsorption-desorption, NH3-TPD, NO-TPD and XRD. The results show that alumi...The effect of preparation method on the properties of alumina modified by La2O3 and BaO was investigated by means of Low temperature nitrogen adsorption-desorption, NH3-TPD, NO-TPD and XRD. The results show that alumina prepared by peptizing method exhibits the best textural properties, alumina obtained by co-precipitation method presents the strongest surface acidity and alumina derived from impregnation method shows the best ability of NO adsorption. After calcination at 1 100 ℃, all alumina except that from impregnation method have excellent thermal stability. When the specific surface area and pore volume of alumina are large enough, the activity of catalyst Pd/alumina is affected primarily by the surface acidity of alumina.展开更多
Alumina supports modified by lanthanum （La） and barium （Ba） were prepared by peptization. Catalysts with different KOH contents supported on modified alumina were prepared by impregnation method. Various technique...Alumina supports modified by lanthanum （La） and barium （Ba） were prepared by peptization. Catalysts with different KOH contents supported on modified alumina were prepared by impregnation method. Various techniques, including N2 adsorption-desorption （Brunauer-Emmet-Teller method, BET）, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and fourier transform infrared absorption spectroscopy （FT-IR）. Catalytic activity for microalgae oil conversion to methyl ester via transesterification was evaluated and analyzed by GC-MS and GC. BET results showed that the support possessed high specific surface area, suitable pore volume and pore size distribution. Activity results indicated that the catalyst with 25 wt% KOH showed the best activity for microalgae oil conversion. XRD and SEM results revealed that Al-O-K compound was the active phase for microalgae oil conversion. The agglomeration and changing of pore structure should be the main reasons for the catalyst deactivation when KOH content was higher than 30 wt%.展开更多
xCu/（10NiO-NiFe2O4） cermet and 1BaO-xCu/（10NiO-NiFe2O4） cermet（x=5,10,17） inert anodes were prepared as potential inert anodes for aluminum electrolysis and their corrosion resistance to traditional electrolyte ...xCu/（10NiO-NiFe2O4） cermet and 1BaO-xCu/（10NiO-NiFe2O4） cermet（x=5,10,17） inert anodes were prepared as potential inert anodes for aluminum electrolysis and their corrosion resistance to traditional electrolyte was studied with anodic current density of 1.0 A/cm2 in laboratory electrolysis.The substantial corrosion of metal Cu was observed,many pores appeared on the surface of anode and electrolytes infiltrated inside anodes during the electrolysis.The wear rates of 5Cu/（10NiO-NiFe2O4）,10Cu/（10NiO-NiFe2O4）,17Cu/（10NiO-NiFe2O4）,1BaO-5Cu/（10NiO-NiFe2O4）,1BaO-10Cu/（10NiO-NiFe2O4） and 1BaO-17Cu/（10NiO-NiFe2O4） are 2.15,6.50,8.30,4.88,4.70 and 4.48 cm/a,respectively.The addition of BaO to 10Cu/（10NiO-NiFe2O4） cermet and 17Cu/（10NiO-NiFe2O4） cermet is advantageous because BaO can effectively promote densification and thus improve corrosion resistance.But the addition of BaO to 5Cu/（10NiO-NiFe2O4） cermet is unfavorable to corrosion resistance because additive BaO at the grain boundary of anode accelerates possibly the corrosion of cermet.展开更多
文摘The effect of preparation method on the properties of alumina modified by La2O3 and BaO was investigated by means of Low temperature nitrogen adsorption-desorption, NH3-TPD, NO-TPD and XRD. The results show that alumina prepared by peptizing method exhibits the best textural properties, alumina obtained by co-precipitation method presents the strongest surface acidity and alumina derived from impregnation method shows the best ability of NO adsorption. After calcination at 1 100 ℃, all alumina except that from impregnation method have excellent thermal stability. When the specific surface area and pore volume of alumina are large enough, the activity of catalyst Pd/alumina is affected primarily by the surface acidity of alumina.
基金supported by the Institute of Chemical Materials Foundation of CAEP(No.626010937)
文摘Alumina supports modified by lanthanum （La） and barium （Ba） were prepared by peptization. Catalysts with different KOH contents supported on modified alumina were prepared by impregnation method. Various techniques, including N2 adsorption-desorption （Brunauer-Emmet-Teller method, BET）, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and fourier transform infrared absorption spectroscopy （FT-IR）. Catalytic activity for microalgae oil conversion to methyl ester via transesterification was evaluated and analyzed by GC-MS and GC. BET results showed that the support possessed high specific surface area, suitable pore volume and pore size distribution. Activity results indicated that the catalyst with 25 wt% KOH showed the best activity for microalgae oil conversion. XRD and SEM results revealed that Al-O-K compound was the active phase for microalgae oil conversion. The agglomeration and changing of pore structure should be the main reasons for the catalyst deactivation when KOH content was higher than 30 wt%.
基金Project(2005CB623703)supported by the National Basic Research Program of ChinaProject(50721003)supported by the National Natural Science Foundation for Innovation Group of China+1 种基金Project(2008AA030501)supported by the National High-tech Research and Development Program of ChinaProject(201012200021)supported by the Basic Scientific Research Program of Central South University,China
文摘xCu/（10NiO-NiFe2O4） cermet and 1BaO-xCu/（10NiO-NiFe2O4） cermet（x=5,10,17） inert anodes were prepared as potential inert anodes for aluminum electrolysis and their corrosion resistance to traditional electrolyte was studied with anodic current density of 1.0 A/cm2 in laboratory electrolysis.The substantial corrosion of metal Cu was observed,many pores appeared on the surface of anode and electrolytes infiltrated inside anodes during the electrolysis.The wear rates of 5Cu/（10NiO-NiFe2O4）,10Cu/（10NiO-NiFe2O4）,17Cu/（10NiO-NiFe2O4）,1BaO-5Cu/（10NiO-NiFe2O4）,1BaO-10Cu/（10NiO-NiFe2O4） and 1BaO-17Cu/（10NiO-NiFe2O4） are 2.15,6.50,8.30,4.88,4.70 and 4.48 cm/a,respectively.The addition of BaO to 10Cu/（10NiO-NiFe2O4） cermet and 17Cu/（10NiO-NiFe2O4） cermet is advantageous because BaO can effectively promote densification and thus improve corrosion resistance.But the addition of BaO to 5Cu/（10NiO-NiFe2O4） cermet is unfavorable to corrosion resistance because additive BaO at the grain boundary of anode accelerates possibly the corrosion of cermet.
