Sm(Co_(bal)Fe_(0.245)Cu_(0.07)Zr_(0.02))7.8(at%)sintered magnets with high remanence(B_(r)~1.15 T)were prepared using a traditional powder metallurgy method.Tunable magnetic properties,especially intrinsic coercivity(...Sm(Co_(bal)Fe_(0.245)Cu_(0.07)Zr_(0.02))7.8(at%)sintered magnets with high remanence(B_(r)~1.15 T)were prepared using a traditional powder metallurgy method.Tunable magnetic properties,especially intrinsic coercivity(H_(cj)),were obtained through adjusting isothermal procedure parameters.H_(cj)of the magnets increases from 305 to 752 kA·m^(-1)with isothermal annealing time increasing from 3 to 20 h,while B_(r) of the magnets almost keeps constant.From the bright field transmission electron microscopy(TEM)images,it is found that:(1)there is dispersed precipitated phase with very small size in the magnet annealed for 3 h,while the magnets annealed for 20 h have distinct and intact cellular structure;(2)the number density of Z-phase in magnet annealed for 20 h is bigger than that for 3 h.Besides,the finer microstructures were studied with high-resolution transmission electron microscopy(HRTEM).展开更多
研究以Web of Science核心数据库中2005~2020年收录的235篇代表文献以及中国知网数据库中2015~2020年收录的83篇代表文献为基础,从宏观角度,对无人机在建设项目管理领域的发文量、期刊来源、研究机构及关键文献等进行分析,并且基于CiteS...研究以Web of Science核心数据库中2005~2020年收录的235篇代表文献以及中国知网数据库中2015~2020年收录的83篇代表文献为基础,从宏观角度,对无人机在建设项目管理领域的发文量、期刊来源、研究机构及关键文献等进行分析,并且基于CiteSpace软件,从关键词研究热点、研究热点聚类、研究趋势演化及研究框架这四个方面进行系统地分析,展现无人机在建设项目管理领域的研究现状和研究热点。最后,对无人机在建设项目管理领域的研究前景进行分析。展开更多
Near-infrared light(NIR)triggered transdermal drug delivery systems are of great interest due to their on-demand drug release,which enable to enhance drug treatment efficiency as well as reduce side effect.Herein,a NI...Near-infrared light(NIR)triggered transdermal drug delivery systems are of great interest due to their on-demand drug release,which enable to enhance drug treatment efficiency as well as reduce side effect.Herein,a NIR-triggered microneedle(MN)patch array has been fabricated through depositing the photothermal conversion agent and anti-diabetic drug-loaded polymer vesicles with upper critical solution temperature(UCST)into dissolvable polymer matrix.The UCST-type polymer has a clearing point temperature of 41℃ and the drug-loaded polymer vesicles present excellent NIR-triggered and temperature responsive drug release behavior in vitro due to the disassociation of polymer vesicles upon NIR irradiation.After applying MNs to diabetic rats,significant hypoglycemic effect is achieved upon interval NIR irradiation and the blood glucose concentration can decrease to normal state for several hours,which enables to achieve the goal of on-demand drug release.This work suggests that the NIR-triggered MN drug release device has a potential application in the treatment of diabetes,especially for those requiring an active drug release manner.展开更多
In this article we state that the compression factor of the Redlich-Kwong Equation Of State （EOS） is smaller than that of van der Waals EOS. The Redlich-Kwong EOS is in better agreement with experimental data on coe...In this article we state that the compression factor of the Redlich-Kwong Equation Of State （EOS） is smaller than that of van der Waals EOS. The Redlich-Kwong EOS is in better agreement with experimental data on coexistence curves at the critical point than the van der Waals EOS. We implement the Redlich-Kwong EOS in the Lattice Boltzmann Method （LBM） simulations via a pseudo-potential approach. We propose a new force, which can obtain computational stationary and reach larger density ratio. As a result, multi-phase flows with large density ratio （up to 1012 in the stationary case） can be simulated. We perform four numerical simulations, which are respectively related to single liquid droplet, vapor-liquid separation, surface tension and liquid coalescence of two droplets.展开更多
Anisotropic CeCo4.325_xCuo.675Fex （x ： 0.475- 0.875） sintered magnets were prepared by traditional powder metallurgical method. Influence of ball-nfilling time and iron content on microstructure and magnetic proper...Anisotropic CeCo4.325_xCuo.675Fex （x ： 0.475- 0.875） sintered magnets were prepared by traditional powder metallurgical method. Influence of ball-nfilling time and iron content on microstructure and magnetic properties of the CeCo4,325-xCuo.675Fex sintered magnets were investigated. It is shown that the properties of the magnet produced by mag- netic powders ball-milled for 40 min are better than that for 30 rain. With iron content increasing, remanence Br and maxi- mum energy product （BH）m increase first and then decrease. The optimal magnetic properties are obtained for the CeCo3.65Cuo.675Feo.675 sintered magnet： Br=0.685 T, the intrinsic coercivity Hci = 350 kA.m-1, and （BH）m ： 85.6 kJ.m-3. The increase of Br is mainly influenced by iron content of 1：5 matrix which can properly increase the saturation induction Bs; the rapid increase of the amount of Ce-rich phase and 5：19 phase gives rise to the deterioration of the magnets when x ≥ 0.775.展开更多
Sm(CoFeCuZr)zsintered permanent magnet has been attracting a great deal of attention by virtue of its high-temperature magnetic properties,low temperature coefficient and good corrosion and oxidation resistance.The mi...Sm(CoFeCuZr)zsintered permanent magnet has been attracting a great deal of attention by virtue of its high-temperature magnetic properties,low temperature coefficient and good corrosion and oxidation resistance.The microstructures and magnetic properties of Sm(Co_(ba1)Fe_(0.245)Cu_(0.07)Zr_(0.02))_(7.8)sintered permanent magnet prepared by a traditional powder metallurgy method were investigated.Tunable magnetic properties,especially the maximum magnetic energy product,(BH)max,were obtained through adjusting solution-treated temperatures.With solution-treated temperature increasing from 1155 to 1195℃,remanence(Br)almost keeps constant and knee point coercivity(Hk),magnetic induction coercivity(H_(cb))and(B_(H))maxfirst increase and then decrease.The intrinsic coercivity(H_(cj))of magnet solution-treated at 1195℃is 738 kA·m^(-1),which is less than 2/5 that of magnet solution-treated at 1183℃(>1927 kA·m^(-1)).The reason that magnet solution-treated at 1195℃shows lower Hcjthan magnet solution-treated at 1183℃is considered to be mainly related to the fact that there are a lot of cells with abnormally small size.In addition,the lattice constant of Sm(Co_(bal)Fe_(0.245)Cu_(0.07)Zr_(0.02))_(7.8)sintered permanent magnet solution-treated at 1195℃,given by indexing highresolution transition electron microscope(HRTEM)results,is considered to be related to the formation of cells with abnormally small size which decreases H_(cj).展开更多
Fractional propagation is used to reduce the spurious velocities for multiphase lattice Boltzmann models.The numerical results show that the maximum spurious velocity at the interfaces could be reduced effectively in ...Fractional propagation is used to reduce the spurious velocities for multiphase lattice Boltzmann models.The numerical results show that the maximum spurious velocity at the interfaces could be reduced effectively in comparison with some o1 the early models.Eight spurious eddies,which previously existed in the D2Q9 model at the interfaces of two-phase flows,are completely eliminated.Simulations are used to confirm these results using different parameters.展开更多
基金the National Basic Research Program of China(No.2014CB643701)the National Natural Science Foundation of China(No.51171048)。
文摘Sm(Co_(bal)Fe_(0.245)Cu_(0.07)Zr_(0.02))7.8(at%)sintered magnets with high remanence(B_(r)~1.15 T)were prepared using a traditional powder metallurgy method.Tunable magnetic properties,especially intrinsic coercivity(H_(cj)),were obtained through adjusting isothermal procedure parameters.H_(cj)of the magnets increases from 305 to 752 kA·m^(-1)with isothermal annealing time increasing from 3 to 20 h,while B_(r) of the magnets almost keeps constant.From the bright field transmission electron microscopy(TEM)images,it is found that:(1)there is dispersed precipitated phase with very small size in the magnet annealed for 3 h,while the magnets annealed for 20 h have distinct and intact cellular structure;(2)the number density of Z-phase in magnet annealed for 20 h is bigger than that for 3 h.Besides,the finer microstructures were studied with high-resolution transmission electron microscopy(HRTEM).
文摘研究以Web of Science核心数据库中2005~2020年收录的235篇代表文献以及中国知网数据库中2015~2020年收录的83篇代表文献为基础,从宏观角度,对无人机在建设项目管理领域的发文量、期刊来源、研究机构及关键文献等进行分析,并且基于CiteSpace软件,从关键词研究热点、研究热点聚类、研究趋势演化及研究框架这四个方面进行系统地分析,展现无人机在建设项目管理领域的研究现状和研究热点。最后,对无人机在建设项目管理领域的研究前景进行分析。
基金financially supported by the Natural Science Foundation of Zhejiang Province(No.LY20E030005)the Opening Project of Jiangxi Province Key Laboratory of Polymer Micro/Nano Manufacturing and Devices(No.PMND201905)。
文摘Near-infrared light(NIR)triggered transdermal drug delivery systems are of great interest due to their on-demand drug release,which enable to enhance drug treatment efficiency as well as reduce side effect.Herein,a NIR-triggered microneedle(MN)patch array has been fabricated through depositing the photothermal conversion agent and anti-diabetic drug-loaded polymer vesicles with upper critical solution temperature(UCST)into dissolvable polymer matrix.The UCST-type polymer has a clearing point temperature of 41℃ and the drug-loaded polymer vesicles present excellent NIR-triggered and temperature responsive drug release behavior in vitro due to the disassociation of polymer vesicles upon NIR irradiation.After applying MNs to diabetic rats,significant hypoglycemic effect is achieved upon interval NIR irradiation and the blood glucose concentration can decrease to normal state for several hours,which enables to achieve the goal of on-demand drug release.This work suggests that the NIR-triggered MN drug release device has a potential application in the treatment of diabetes,especially for those requiring an active drug release manner.
基金supported by the Ministry of Education in China(Grant No. IRT0844)the Shanghai Science and Technology Commission Project of Excellent Academic Leaders (Grant No.11XD1402300)
文摘In this article we state that the compression factor of the Redlich-Kwong Equation Of State （EOS） is smaller than that of van der Waals EOS. The Redlich-Kwong EOS is in better agreement with experimental data on coexistence curves at the critical point than the van der Waals EOS. We implement the Redlich-Kwong EOS in the Lattice Boltzmann Method （LBM） simulations via a pseudo-potential approach. We propose a new force, which can obtain computational stationary and reach larger density ratio. As a result, multi-phase flows with large density ratio （up to 1012 in the stationary case） can be simulated. We perform four numerical simulations, which are respectively related to single liquid droplet, vapor-liquid separation, surface tension and liquid coalescence of two droplets.
基金financially supported by the National High-Tech R&D Program of China(No.2010AA03A401)the National Basic Research Program of China(No.2010CB934601)the National Nature Science Foundation of China(Nos.50931001and 51241009)
文摘Anisotropic CeCo4.325_xCuo.675Fex （x ： 0.475- 0.875） sintered magnets were prepared by traditional powder metallurgical method. Influence of ball-nfilling time and iron content on microstructure and magnetic properties of the CeCo4,325-xCuo.675Fex sintered magnets were investigated. It is shown that the properties of the magnet produced by mag- netic powders ball-milled for 40 min are better than that for 30 rain. With iron content increasing, remanence Br and maxi- mum energy product （BH）m increase first and then decrease. The optimal magnetic properties are obtained for the CeCo3.65Cuo.675Feo.675 sintered magnet： Br=0.685 T, the intrinsic coercivity Hci = 350 kA.m-1, and （BH）m ： 85.6 kJ.m-3. The increase of Br is mainly influenced by iron content of 1：5 matrix which can properly increase the saturation induction Bs; the rapid increase of the amount of Ce-rich phase and 5：19 phase gives rise to the deterioration of the magnets when x ≥ 0.775.
基金financially supported by the National Basic Research Program of China(No.2014CB643701)the National Natural Science Foundation(No.51171048)
文摘Sm(CoFeCuZr)zsintered permanent magnet has been attracting a great deal of attention by virtue of its high-temperature magnetic properties,low temperature coefficient and good corrosion and oxidation resistance.The microstructures and magnetic properties of Sm(Co_(ba1)Fe_(0.245)Cu_(0.07)Zr_(0.02))_(7.8)sintered permanent magnet prepared by a traditional powder metallurgy method were investigated.Tunable magnetic properties,especially the maximum magnetic energy product,(BH)max,were obtained through adjusting solution-treated temperatures.With solution-treated temperature increasing from 1155 to 1195℃,remanence(Br)almost keeps constant and knee point coercivity(Hk),magnetic induction coercivity(H_(cb))and(B_(H))maxfirst increase and then decrease.The intrinsic coercivity(H_(cj))of magnet solution-treated at 1195℃is 738 kA·m^(-1),which is less than 2/5 that of magnet solution-treated at 1183℃(>1927 kA·m^(-1)).The reason that magnet solution-treated at 1195℃shows lower Hcjthan magnet solution-treated at 1183℃is considered to be mainly related to the fact that there are a lot of cells with abnormally small size.In addition,the lattice constant of Sm(Co_(bal)Fe_(0.245)Cu_(0.07)Zr_(0.02))_(7.8)sintered permanent magnet solution-treated at 1195℃,given by indexing highresolution transition electron microscope(HRTEM)results,is considered to be related to the formation of cells with abnormally small size which decreases H_(cj).
基金Supported in part by the Ministry of Education of China under Grant No IRT0844the Shanghai Science and Technology Commission Projects of Leading Scientists and Excellent Academic Leaders under Grant No 11XD1402300.
文摘Fractional propagation is used to reduce the spurious velocities for multiphase lattice Boltzmann models.The numerical results show that the maximum spurious velocity at the interfaces could be reduced effectively in comparison with some o1 the early models.Eight spurious eddies,which previously existed in the D2Q9 model at the interfaces of two-phase flows,are completely eliminated.Simulations are used to confirm these results using different parameters.
