The development of multifunctional and efficient electromagnetic wave absorbing materials is a challenging research hotspot.Here,the magnetized Ni flower/MXene hybrids are successfully assembled on the surface of mela...The development of multifunctional and efficient electromagnetic wave absorbing materials is a challenging research hotspot.Here,the magnetized Ni flower/MXene hybrids are successfully assembled on the surface of melamine foam(MF)through electrostatic self-assembly and dip-coating adsorption process,realizing the integration of microwave absorption,infrared stealth,and flame retardant.Remarkably,the Ni/MXene-MF achieves a minimum reflection loss(RLmin)of−62.7 dB with a corresponding effective absorption bandwidth(EAB)of 6.24 GHz at 2 mm and an EAB of 6.88 GHz at 1.8 mm.Strong electromagnetic wave absorption is attributed to the three-dimensional magnetic/conductive networks,which provided excellent impedance matching,dielectric loss,magnetic loss,interface polarization,and multiple attenuations.In addition,the Ni/MXene-MF endows low density,excellent heat insulation,infrared stealth,and flame-retardant functions.This work provided a new development strategy for the design of multifunctional and efficient electromagnetic wave absorbing materials.展开更多
The use of bioactive glass(BG)particles as a filler for the development of composite electrospun fibers has already been widely reported and investigated.The novelty of the present research work is represented by the ...The use of bioactive glass(BG)particles as a filler for the development of composite electrospun fibers has already been widely reported and investigated.The novelty of the present research work is represented by the use of benign solvents(like acetic acid and formic acid)for electrospinning of composite fibers containing BG particles,by using a blend of PCL and chitosan.In this work,different BG particle sizes were investigated,namely nanosized and micron-sized.A preliminary investigation about the possible alteration of BG particles in the electrospinning solvents was performed using SEM analysis.The obtained composite fibers were investigated in terms of morphological,chemical and mechanical properties.An in vitro mineralization assay in simulated body fluid(SBF)was performed to investigate the capability of the composite electrospun fibers to induce the formation of hydroxycarbonate apatite(HCA).展开更多
The original version of this article unfortunately contained some mistakes.The corrections are updated as follows:Error 1:We found that Equations 3,4 and 6 were wrong in the published paper:Error 2:In the page 7,“Sin...The original version of this article unfortunately contained some mistakes.The corrections are updated as follows:Error 1:We found that Equations 3,4 and 6 were wrong in the published paper:Error 2:In the page 7,“Since N Ni/MXene-MF possessed numer-ous heterogeneous interfaces and abundant functional groups,the dielectric loss mechanism was explored.”展开更多
In recently years,high-performance wearable strain sensors have attracted great attention in academic and industrial.Herein,a conductive polymer composite of electrospun thermoplastic polyurethane(TPU)fibrous film mat...In recently years,high-performance wearable strain sensors have attracted great attention in academic and industrial.Herein,a conductive polymer composite of electrospun thermoplastic polyurethane(TPU)fibrous film matrix-embedded carbon black(CB)particles with adjustable scaffold network was fabricated for high-sensitive strain sensor.This work indicated the influence of stereoscopic scaffold network structure built under various rotating speeds of collection device in electrospinning process on the electrical response of TPU/CB strain sensor.This structure makes the sensor exhibit combined characters of high sensitivity under stretching strain(gauge factor of 8962.7 at 155%strain),fast response time(60 ms),outstanding stability and durability(>10,000 cycles)and a widely workable stretching range(0–160%).This high-performance,wearable,flexible strain sensor has a broad vision of application such as intelligent terminals,electrical skins,voice measurement and human motion monitoring.Moreover,a theoretical approach was used to analyze mechanical property and a model based on tunneling theory was modified to describe the relative change of resistance upon the applied strain.Meanwhile,two equations based from this model were first proposed and offered an effective but simple approach to analyze the change of number of conductive paths and distance of adjacent conductive particles.展开更多
High-performance compression sensors have been playing an increasingly important role in human motion detection,health monitoring and human-machine interfaces over recent years.However,it remains a great challenge to ...High-performance compression sensors have been playing an increasingly important role in human motion detection,health monitoring and human-machine interfaces over recent years.However,it remains a great challenge to develop theoretical models providing practical guidance to the sensor design.Herein,carbon black(CB),carbon nanotubes(CNTs)and graphene nanoplatelets(GNPs)were respectively incorporated into porous melamine sponges by a facile approach of dip-coating to fabricate compression sensors.Uniaxial compression-resistance tests show that the compressibility,stability and piezoresistive sensitivity of sensors could be tailored by the filler type and concentration.A model considering the number of conductive pathways(NCP)is given to describe the relationship between the resistance change and applied compression,showing extremely good agreement with the experimental data.Also,the correlation between the equivalent filler volume fraction and conductivity is described by the other two models proposed by McLachlan and Kirkpatrick,revealing the electrical percolation thresholds(Φc)for the conductive systems under compression.Among the three fillers,CB particles endowed the composite with the best piezoresistive sensitivity but the largestΦc due to its small size and aspect ratio.A combination of experimental study and theoretical model opens up a way of further understanding the piezoresistive sensing behavior as well as optimizing the electrical property and piezoresistivity of compressive conductive polymer composite.展开更多
Ultrafine tungsten carbide and fine cobalt as well as nano yttrium oxide powders were used as the raw materials. The effects of hot-press below the eutectic temperature and conventional liquid phase sintering on the s...Ultrafine tungsten carbide and fine cobalt as well as nano yttrium oxide powders were used as the raw materials. The effects of hot-press below the eutectic temperature and conventional liquid phase sintering on the structures and properties of WC-20Co-1Y2O3 cemented carbide were studied. It is shown that hot-pressed alloy has the character of isotropic properties and microstructure with homogeneous and ultrafine WC grains. However, the ultrafine and fully-densified structure is developed at the cost of the presence of large amount of cobalt-lake （unevenly distributed binder phase）, and thus lower strength. Yttrium oxide in the alloy cannot play the role of grain growth inhibitor fully when cemented carbide with high content of cobalt and ultrafine raw materials is sintered at high liquid phase sintering temperature. Peculiar platelet-enhanced bi-model structure is formed in WC-20Co-1Y2O3 cemented carbide by conventional liquid phase sintering, which points out that yttrium oxide in the alloy facilitates the formation of plate-like WC grain.展开更多
基金The authors thank National Natural Science Foundation of China(51803190)National Key R&D Program of China(2019YFA0706802)financial support.
文摘The development of multifunctional and efficient electromagnetic wave absorbing materials is a challenging research hotspot.Here,the magnetized Ni flower/MXene hybrids are successfully assembled on the surface of melamine foam(MF)through electrostatic self-assembly and dip-coating adsorption process,realizing the integration of microwave absorption,infrared stealth,and flame retardant.Remarkably,the Ni/MXene-MF achieves a minimum reflection loss(RLmin)of−62.7 dB with a corresponding effective absorption bandwidth(EAB)of 6.24 GHz at 2 mm and an EAB of 6.88 GHz at 1.8 mm.Strong electromagnetic wave absorption is attributed to the three-dimensional magnetic/conductive networks,which provided excellent impedance matching,dielectric loss,magnetic loss,interface polarization,and multiple attenuations.In addition,the Ni/MXene-MF endows low density,excellent heat insulation,infrared stealth,and flame-retardant functions.This work provided a new development strategy for the design of multifunctional and efficient electromagnetic wave absorbing materials.
文摘The use of bioactive glass(BG)particles as a filler for the development of composite electrospun fibers has already been widely reported and investigated.The novelty of the present research work is represented by the use of benign solvents(like acetic acid and formic acid)for electrospinning of composite fibers containing BG particles,by using a blend of PCL and chitosan.In this work,different BG particle sizes were investigated,namely nanosized and micron-sized.A preliminary investigation about the possible alteration of BG particles in the electrospinning solvents was performed using SEM analysis.The obtained composite fibers were investigated in terms of morphological,chemical and mechanical properties.An in vitro mineralization assay in simulated body fluid(SBF)was performed to investigate the capability of the composite electrospun fibers to induce the formation of hydroxycarbonate apatite(HCA).
文摘The original version of this article unfortunately contained some mistakes.The corrections are updated as follows:Error 1:We found that Equations 3,4 and 6 were wrong in the published paper:Error 2:In the page 7,“Since N Ni/MXene-MF possessed numer-ous heterogeneous interfaces and abundant functional groups,the dielectric loss mechanism was explored.”
文摘In recently years,high-performance wearable strain sensors have attracted great attention in academic and industrial.Herein,a conductive polymer composite of electrospun thermoplastic polyurethane(TPU)fibrous film matrix-embedded carbon black(CB)particles with adjustable scaffold network was fabricated for high-sensitive strain sensor.This work indicated the influence of stereoscopic scaffold network structure built under various rotating speeds of collection device in electrospinning process on the electrical response of TPU/CB strain sensor.This structure makes the sensor exhibit combined characters of high sensitivity under stretching strain(gauge factor of 8962.7 at 155%strain),fast response time(60 ms),outstanding stability and durability(>10,000 cycles)and a widely workable stretching range(0–160%).This high-performance,wearable,flexible strain sensor has a broad vision of application such as intelligent terminals,electrical skins,voice measurement and human motion monitoring.Moreover,a theoretical approach was used to analyze mechanical property and a model based on tunneling theory was modified to describe the relative change of resistance upon the applied strain.Meanwhile,two equations based from this model were first proposed and offered an effective but simple approach to analyze the change of number of conductive paths and distance of adjacent conductive particles.
文摘High-performance compression sensors have been playing an increasingly important role in human motion detection,health monitoring and human-machine interfaces over recent years.However,it remains a great challenge to develop theoretical models providing practical guidance to the sensor design.Herein,carbon black(CB),carbon nanotubes(CNTs)and graphene nanoplatelets(GNPs)were respectively incorporated into porous melamine sponges by a facile approach of dip-coating to fabricate compression sensors.Uniaxial compression-resistance tests show that the compressibility,stability and piezoresistive sensitivity of sensors could be tailored by the filler type and concentration.A model considering the number of conductive pathways(NCP)is given to describe the relationship between the resistance change and applied compression,showing extremely good agreement with the experimental data.Also,the correlation between the equivalent filler volume fraction and conductivity is described by the other two models proposed by McLachlan and Kirkpatrick,revealing the electrical percolation thresholds(Φc)for the conductive systems under compression.Among the three fillers,CB particles endowed the composite with the best piezoresistive sensitivity but the largestΦc due to its small size and aspect ratio.A combination of experimental study and theoretical model opens up a way of further understanding the piezoresistive sensing behavior as well as optimizing the electrical property and piezoresistivity of compressive conductive polymer composite.
文摘Ultrafine tungsten carbide and fine cobalt as well as nano yttrium oxide powders were used as the raw materials. The effects of hot-press below the eutectic temperature and conventional liquid phase sintering on the structures and properties of WC-20Co-1Y2O3 cemented carbide were studied. It is shown that hot-pressed alloy has the character of isotropic properties and microstructure with homogeneous and ultrafine WC grains. However, the ultrafine and fully-densified structure is developed at the cost of the presence of large amount of cobalt-lake （unevenly distributed binder phase）, and thus lower strength. Yttrium oxide in the alloy cannot play the role of grain growth inhibitor fully when cemented carbide with high content of cobalt and ultrafine raw materials is sintered at high liquid phase sintering temperature. Peculiar platelet-enhanced bi-model structure is formed in WC-20Co-1Y2O3 cemented carbide by conventional liquid phase sintering, which points out that yttrium oxide in the alloy facilitates the formation of plate-like WC grain.
