Inspired by the transport behavior of water and ions through the aligned channels in trees,we demonstrate a facile,scalable approach for constructing biomorphic cellular Si_(3)N_(4) ceramic frameworks with well-aligne...Inspired by the transport behavior of water and ions through the aligned channels in trees,we demonstrate a facile,scalable approach for constructing biomorphic cellular Si_(3)N_(4) ceramic frameworks with well-aligned nanowhisker arrays on the surface of directionally aligned microchannel alignments.Through a facile Y(NO_(3))_(3) solution infiltration into wood-derived carbon preforms and subsequent heat treatment,we can faultlessly duplicate the anisotropic wood architectures into free-standing bulk porous Si_(3)N_(4) ceramics.Firstly,α-Si3N4 microchannels were synthesized on the surface of CB-templates via carbothermal reduction nitridation(CRN).And then,homogeneous distributed Y–Si–O–N liquid phase on the walls of microchannel facilitated the anisotropicβ-Si3N4 grain growth to form nanowhisker arrays.The dense aligned microchannels with low-tortuosity enable excellent load carrying capacity and thermal conduction through the entire materials.As a result,the porous Si_(3)N_(4) ceramics exhibited an outstanding thermal conductivity(TC,k_(R)≈6.26 W·m^(−1)·K^(−1)),a superior flexural strength(σ_(L)≈29.4 MPa),and a relative high anisotropic ratio of TC(k_(R)/k_(L)=4.1).The orientation dependence of the microstructure–property relations may offer a promising perspective for the fabrication of multifunctional ceramics.展开更多
Study on gas–liquid flow in stirred tank with two combinations of dual-impeller(six-bent-bladed turbine(6BT)+six-inclined-blade down-pumping turbine(6 ITD),the six-bent-bladed turbine(6BT)+six-inclinedblade up-pumpin...Study on gas–liquid flow in stirred tank with two combinations of dual-impeller(six-bent-bladed turbine(6BT)+six-inclined-blade down-pumping turbine(6 ITD),the six-bent-bladed turbine(6BT)+six-inclinedblade up-pumping turbine(6ITU))was conducted using computational fluid dynamics(CFD)and population balance model(PBM)(CFD-PBM)coupled model.The local bubble size was captured by particle image velocimetry(PIV)measurement.The gas holdup,bubble size distribution and gas–liquid interfacial area were explored at different conditions through numerical simulation.The results showed that the 4 mm bubbles accounted for the largest proportion of 33%at the gas flow rates Q=0.76 m^(3)·h^(-1) and 22%at Q=1.52 m^(3)·h^(-1) for combined impeller of 6BT+6ITU,while the bubbles of 4.7 mm and 5.5 mm were the largest proportion for 6BT+6ITD combination,i.e.25%at Q=0.76 m^(3)·h^(-1) and 22%at Q=1.52 m^(3)·h^(-1),respectively,which indicated that 6BT+6ITU could reduce bubble size effectively and promote gas dispersion.In addition,the gas holdup around impellers was increased obviously with the speed compared with gas flow rate.So it was concluded that 6ITU impeller could be more conductive to the bubble dispersion with more uniform bubble size,which embodied the advantages of 6BT+6ITU combination in gas–liquid mixing.展开更多
To investigate the feasibility and safety of alginate fibers loaded with chlorhexidine gluconate(CHG)for biomedical applications,vitro cytotoxic test and drug release pattern were studied.Discovery Studio(DS),a comput...To investigate the feasibility and safety of alginate fibers loaded with chlorhexidine gluconate(CHG)for biomedical applications,vitro cytotoxic test and drug release pattern were studied.Discovery Studio(DS),a computer aided software,was utilized to briefly investigate the energy state and solvation at the molecular level.Alginate fiber loaded with CHG presented different drug release patterns in PBS and A solution.Cytotoxicity results indicated that CHG-loaded alginate fibers can promote the growth of L-929 mouse fibroblast cells with better biocompatibility.Through the simulation,the lowest energy conformation of three representative molecular bond regions was optimized with stronger stability.As the torsional energy increased,the bond energy of the target regions decreased.Besides,the transition energy of the target regions was greatly reduced by solvation.In a word,alginate fibers loaded with CHG expressed better biocompatibility and drug sustained-release ability,which indicates that CHG-loaded alginate fibers has a broad application prospect in medical dressing.展开更多
文摘Inspired by the transport behavior of water and ions through the aligned channels in trees,we demonstrate a facile,scalable approach for constructing biomorphic cellular Si_(3)N_(4) ceramic frameworks with well-aligned nanowhisker arrays on the surface of directionally aligned microchannel alignments.Through a facile Y(NO_(3))_(3) solution infiltration into wood-derived carbon preforms and subsequent heat treatment,we can faultlessly duplicate the anisotropic wood architectures into free-standing bulk porous Si_(3)N_(4) ceramics.Firstly,α-Si3N4 microchannels were synthesized on the surface of CB-templates via carbothermal reduction nitridation(CRN).And then,homogeneous distributed Y–Si–O–N liquid phase on the walls of microchannel facilitated the anisotropicβ-Si3N4 grain growth to form nanowhisker arrays.The dense aligned microchannels with low-tortuosity enable excellent load carrying capacity and thermal conduction through the entire materials.As a result,the porous Si_(3)N_(4) ceramics exhibited an outstanding thermal conductivity(TC,k_(R)≈6.26 W·m^(−1)·K^(−1)),a superior flexural strength(σ_(L)≈29.4 MPa),and a relative high anisotropic ratio of TC(k_(R)/k_(L)=4.1).The orientation dependence of the microstructure–property relations may offer a promising perspective for the fabrication of multifunctional ceramics.
基金supported by the National Natural Science Foundation of China(52176040)Shandong Provincial Natural Science Foundation of China(ZR2018LE015)。
文摘Study on gas–liquid flow in stirred tank with two combinations of dual-impeller(six-bent-bladed turbine(6BT)+six-inclined-blade down-pumping turbine(6 ITD),the six-bent-bladed turbine(6BT)+six-inclinedblade up-pumping turbine(6ITU))was conducted using computational fluid dynamics(CFD)and population balance model(PBM)(CFD-PBM)coupled model.The local bubble size was captured by particle image velocimetry(PIV)measurement.The gas holdup,bubble size distribution and gas–liquid interfacial area were explored at different conditions through numerical simulation.The results showed that the 4 mm bubbles accounted for the largest proportion of 33%at the gas flow rates Q=0.76 m^(3)·h^(-1) and 22%at Q=1.52 m^(3)·h^(-1) for combined impeller of 6BT+6ITU,while the bubbles of 4.7 mm and 5.5 mm were the largest proportion for 6BT+6ITD combination,i.e.25%at Q=0.76 m^(3)·h^(-1) and 22%at Q=1.52 m^(3)·h^(-1),respectively,which indicated that 6BT+6ITU could reduce bubble size effectively and promote gas dispersion.In addition,the gas holdup around impellers was increased obviously with the speed compared with gas flow rate.So it was concluded that 6ITU impeller could be more conductive to the bubble dispersion with more uniform bubble size,which embodied the advantages of 6BT+6ITU combination in gas–liquid mixing.
基金Sponsored by the Enterprise Commissioned Research and Development Projects(Grant No.SDHZ2017005)the Applied Basic Research Project of Yichang City(Grant No.A15-204)。
文摘To investigate the feasibility and safety of alginate fibers loaded with chlorhexidine gluconate(CHG)for biomedical applications,vitro cytotoxic test and drug release pattern were studied.Discovery Studio(DS),a computer aided software,was utilized to briefly investigate the energy state and solvation at the molecular level.Alginate fiber loaded with CHG presented different drug release patterns in PBS and A solution.Cytotoxicity results indicated that CHG-loaded alginate fibers can promote the growth of L-929 mouse fibroblast cells with better biocompatibility.Through the simulation,the lowest energy conformation of three representative molecular bond regions was optimized with stronger stability.As the torsional energy increased,the bond energy of the target regions decreased.Besides,the transition energy of the target regions was greatly reduced by solvation.In a word,alginate fibers loaded with CHG expressed better biocompatibility and drug sustained-release ability,which indicates that CHG-loaded alginate fibers has a broad application prospect in medical dressing.
