KM2A is one of the main sub-arrays of LHAASO,working on gamma ray astronomy and cosmic ray physics at energies above 10 TeV.Detector simulation is the important foundation for estimating detector performance and data ...KM2A is one of the main sub-arrays of LHAASO,working on gamma ray astronomy and cosmic ray physics at energies above 10 TeV.Detector simulation is the important foundation for estimating detector performance and data analysis.It is a big challenge to simulate the KM2A detector in the framework of Geant4 due to the need to track numerous photons from a large number of detector units(>6000)with large altitude difference(30)and huge coverage(1.3).In this paper,the design of the KM2A simulation code G4KM2A based on Geant4 is introduced.The process of G4KM2A is optimized mainly in memory consumption to avoid memory overflow.Some simplifications are used to significantly speed up the execution of G4KM2A.The running time is reduced by at least 30 times compared to full detector simulation.The particle distributions and the core/angle resolution comparison between simulation and experimental data of the full KM2A array are also presented,which show good agreement.展开更多
The full array of the Large High Altitude Air Shower Observatory(LHAASO)has been in operation since July 2021.For its kilometer-square array(KM2A),we optimized the selection criteria for very high and ultrahigh energy...The full array of the Large High Altitude Air Shower Observatory(LHAASO)has been in operation since July 2021.For its kilometer-square array(KM2A),we optimized the selection criteria for very high and ultrahigh energyγ-rays using data collected from August 2021 to August 2022,resulting in an improvement in significance of the detection in the Crab Nebula of approximately 15%,compared with that of previous cuts.With the implementation of these new selection criteria,the angular resolution was also significantly improved by approximately 10%at tens of TeV.Other aspects of the full KM2A array performance,such as the pointing error,were also calibrated using the Crab Nebula.The resulting energy spectrum of the Crab Nebula in the energy range of 10-1000 TeV are well fitted by a log-parabola model,which is consistent with the previous results from LHAASO and other experiments.展开更多
Theγ-ray emission from the W51 complex is widely acknowledged to be attributed to the interaction between the cosmic rays(CRs)accelerated by the shock of supernova remnant(SNR)W51C and the dense molecular clouds in t...Theγ-ray emission from the W51 complex is widely acknowledged to be attributed to the interaction between the cosmic rays(CRs)accelerated by the shock of supernova remnant(SNR)W51C and the dense molecular clouds in the adjacent star-forming region,W51B.However,the maximum acceleration capability of W51C for CRs remains elusive.Based on observations conducted with the Large High Altitude Air Shower Observatory(LHAASO),we report a significant detection ofγrays emanating from the W51 complex,with energies from 2 to 200 TeV.The LHAASO measurements,for the first time,extend theγ-ray emission from the W51 complex beyond 100 TeV and reveal a significant spectrum bending at tens of TeV.By combining the"π^(0)-decay bump"featured data from Fermi-LAT,the broadbandγ-ray spectrum of the W51 region can be well-characterized by a simple pp-collision model.The observed spectral bending feature suggests an exponential cutoff at~400 TeV or a power-law break at~200 TeV in the CR proton spectrum,most likely providing the first evidence of SNRs serving as CR accelerators approaching the PeV regime.Additionally,two young star clusters within W51B could also be theoretically viable to produce the most energeticγrays observed by LHAASO.Our findings strongly support the presence of extreme CR accelerators within the W51 complex and provide new insights into the origin of Galactic CRs.展开更多
First evidence of a structure in the J/ψΛinvariant mass distribution is obtained from an amplitude analysis of■b^(-)J/ψΛK^(-)decays.The observed structure is consistent with being due to a charmonium pentaquark w...First evidence of a structure in the J/ψΛinvariant mass distribution is obtained from an amplitude analysis of■b^(-)J/ψΛK^(-)decays.The observed structure is consistent with being due to a charmonium pentaquark with strangeness with a significance of 3.1r including systematic uncertainties and lookelsewhere effect.Its mass and width are determined to be 4458:8±2:9t4:7-1:1 MeV and 17:3±6:5t8:0-5:7 MeV,respectively,where the quoted uncertainties are statistical and systematic.The structure is also consistent with being due to two resonances.In addition,the narrow excited■^(-)states,N■(1690)and■(1820),are seen for the first time in a■b^(-)decay,and their masses and widths are measured with improved precision.The analysis is performed using pp collision data corresponding to a total integrated luminosity of 9 fb^(-1),collected with the LHCb experiment at centre-of-mass energies of 7,8 and 13 TeV.展开更多
A first search for the Ξ_(bc)^(+)J/ψΞ_(c)^(+) decay is performed by the LHCb experiment with a data sample of proton-proton collisions, corresponding to an integrated luminosity of 9 fb−1 recorded at centre-of-mass...A first search for the Ξ_(bc)^(+)J/ψΞ_(c)^(+) decay is performed by the LHCb experiment with a data sample of proton-proton collisions, corresponding to an integrated luminosity of 9 fb−1 recorded at centre-of-mass energies of 7, 8, and 13 TeV. Two peaking structures are seen with a local (global) significance of 4.3(2.8) and 4.1(2.4) standard deviations at masses of 6571 and 6694 MeV/c2, respectively. Upper limits are set on the Ξ+bc baryon production cross-section times the branching fraction relative to that of the B+c→J/ψD+s decay at centre-of-mass energies of 8 and 13 TeV, in the Ξ+bc and in the B+c rapidity and transverse-momentum ranges from 2.0 to 4.5 and 0 to 20GeV/c, respectively. Upper limits are presented as a function of the Ξ+bc mass and lifetime.展开更多
A search for the rare decays W^(+)→D_(s)^(+)γ and Z→D0γis performed using proton-proton collision data collected by the LHCb experiment at a centre-of-mass energy of 13TeV,corresponding to an integrated luminosity...A search for the rare decays W^(+)→D_(s)^(+)γ and Z→D0γis performed using proton-proton collision data collected by the LHCb experiment at a centre-of-mass energy of 13TeV,corresponding to an integrated luminosity of 2.0fb−1.No significant signal is observed for either decay mode and upper limits on their branching fractions are set using W^(+)→D_(s)^(+)γ and Z→μ+μ−decays as normalization channels.The upper limits are 6.5×10^(−4) and 2.1×10^(−3) at 95% confidence level for the W^(+)→D_(s)^(+)γ and Z→D^(0)γ decay modes,respectively.This is the first reported search for the Z→D^(0)γ decay,while the upper limit on the W+→D+sγbranching fraction improves upon the previous best limit.展开更多
The first search for the doubly heavyΩ^(0)_(bc)baryon and a search for the E^(0)_(bc)baryon are performed using pp collision data collected via the LHCb experiment from 2016 to 2018 at a centre-of-mass energy of 13 T...The first search for the doubly heavyΩ^(0)_(bc)baryon and a search for the E^(0)_(bc)baryon are performed using pp collision data collected via the LHCb experiment from 2016 to 2018 at a centre-of-mass energy of 13 TeV,corresponding to an integrated luminosity of 5.2 fb^(-1).The baryons are reconstructed via their decays to Λ^(+)_(c)π^(-)and E^(+)_(c)π^(-).No significant excess is fbund for invariant masses between 6700 and 7300 MeV/c^(2),in a rapidity range from 2.0 to 4.5 and a transverse momentum range from 2 to 20 MeV/c.Upper limits are set on the ratio of the Ω^(0)_(bc)and E^(0)_(bc)production cross-section times the branching fraction to Λ^(+)_(c)π^(-)(E^(+)_(c)π^(-))relative to that of the Λ^(0)_(b)(E^(0)_(b))baryon,for different lifetime hypotheses,at 95%confidence level.The upper limits range from 0.5 x 10^(-4)to 2.5 x 10^(-4)for theΩ^(0)_(bc)→Λ^(+)_(c)π^(-)(E^(0)_(bc)→Λ^(+)_(c)π^(-))decay,and from 1.4x 10^(-3)to 6.9 x 10^(-3)for theΩ^(0)_(bc)→E^(+)_(c)π^(-)(E^(0)_(bc)→E^(+)_(c)π^(-))decay,depending on the considered mass and lifetime of theΩ^(0)_(bc)(E^(0)_(bc))baryon.展开更多
Introduction One of main scientific goals of the Large High Altitude Air Shower Observatory(LHAASO)is to accurately measure the energy spectra of different cosmic ray compositions around the‘knee’region.The Wide Fiel...Introduction One of main scientific goals of the Large High Altitude Air Shower Observatory(LHAASO)is to accurately measure the energy spectra of different cosmic ray compositions around the‘knee’region.The Wide Field-of-View(FoV)Cherenkov Telescope Array(WFCTA),which is one of the main detectors of LHAASO and has 18 telescopes,is built to achieve this goal.Multiple telescopes are put together and point to connected directions for a larger FoV.Method Telescopes are deployed spatially as close as possible,but due to their own size,the distance between two adjacent telescopes is about 10 m.Therefore,the Cherenkov lateral distribution and the parallax between the two telescopes should be considered in the event building process for images crossing over the boundaries of FoVs of the telescopes.An event building method for Cherenkov images measured by multiple telescopes of WFCTA is developed.The performance of the shower measurements using the combined images is evaluated by comparing with showers that are fully contained by a virtual telescope in simulation.Results and conclusion It is proved that the developed event building process can help to increase the FoV of WFCTA by 30%while maintaining the same reconstruction quality,compared to the separate telescope reconstruction method.展开更多
The Large High Altitude Air Shower Observatory(LHAASO)has three sub-arrays,KM2A,WCDA,and WFCTA.The flux variations of cosmic ray air showers were studied by analyzing the KM2A data during a thunderstorm on June 10,202...The Large High Altitude Air Shower Observatory(LHAASO)has three sub-arrays,KM2A,WCDA,and WFCTA.The flux variations of cosmic ray air showers were studied by analyzing the KM2A data during a thunderstorm on June 10,2021.The number of shower events that meet the trigger conditions increases significantly in atmospheric electric fields,with a maximum fractional increase of 20%.The variations in trigger rates(increases or decreases)were found to be strongly dependent on the primary zenith angle.The flux of secondary particles increased significantly,following a trend similar to that of shower events.To better understand the observed behavior,Monte Carlo simulations were performed with CORSIKA and G4KM2A(a code based on GEANT4).We found that the experimental data(in saturated negative fields)were in good agreement with the simulations,assuming the presence of a uniform electric field of-700 V/cm with a thickness of 1500 m in the atmosphere above the observation level.Due to the acceleration/deceleration by the atmospheric electric field,the number of secondary particles with energy above the detector threshold was modified,resulting in the changes in shower detection rate.展开更多
A search for the rare decay B^(0)→J/ψФis performed using Pp collision data collected with the LHCb dete-ctor at centre-of-mass energies of 7,8 and 13 TeV,corresponding to an integrated luminosity of9 fb.No signific...A search for the rare decay B^(0)→J/ψФis performed using Pp collision data collected with the LHCb dete-ctor at centre-of-mass energies of 7,8 and 13 TeV,corresponding to an integrated luminosity of9 fb.No significant signal of the decay is observed and an upper limitof 1.1x 10^(-7)at 90%confidence level is set on the branching fraction.展开更多
In order to reduce high calibration pressure in hydroforming of components with too small radii, a method wasproposed to manufacture automotive hollow components with rectangular shape by relatively lower pressure. Th...In order to reduce high calibration pressure in hydroforming of components with too small radii, a method wasproposed to manufacture automotive hollow components with rectangular shape by relatively lower pressure. Theprocess is simulated and analyzed. It is thought that the friction force between the die surface and tube is a mainreason that high pressure is needed to form small radii. Using the method proposed in this paper, a petal-like sectionshape is first preformed so that the central zones of the four sides of the preform section do not contact with the diesides, thus the tube metal is easy to flow into the transition radii area in calibration stage. Moreover, a positive forcealong the sides is produced by the internal pressure, which is beneficial to overcome the friction force and push thematerial into the radii. Therefore, the pressure for forming the transition radii is greatly reduced and the componentswith small radii can be formed with relatively lower pressure. For the experimental case conducted in this paper, theforming pressure is reduced by about 28.6% than the estimated forming pressure.展开更多
Rapid cooling and solidification during laser additive manufacturing(LAM)can produce ultra-fine microstructure with higher strength.However,the non-uniform cell/grain structure can easily result in early stress concen...Rapid cooling and solidification during laser additive manufacturing(LAM)can produce ultra-fine microstructure with higher strength.However,the non-uniform cell/grain structure can easily result in early stress concentration and fracture during deformation,which remains a major challenge for the LAM field.Using Al-12Si as the model alloy,we employed the external static magnetic field(SMF)to modulate the laser powder bed fusion process(L-PBF),demonstrating a uniform microstructure with a refined cell structure.The mechanical properties show that the SMF can produce a combination of high tensile strength of 451.4±0.5 MPa and large uniform elongation of 10.4%±0.79%,which are superior to those of previously-reported Al-Si alloys with post-treatment or element alloying.The mechanism analysis based on multi-scale simulation reveals the determining role of SMF in rapid solidification,and this method is applicable to the microstructure control of other metallic materials during LAM.展开更多
A Moirésystem is formed when two periodic structures have a slightly mismatched period,resulting in unusual strongly correlated states in the presence of particle-particle interactions.The periodic structures can...A Moirésystem is formed when two periodic structures have a slightly mismatched period,resulting in unusual strongly correlated states in the presence of particle-particle interactions.The periodic structures can arise from the intrinsic crystalline order and periodic external field.We investigate a one-dimensional Hubbard model with periodic on-site potential of period n_(0),which is commensurate to the lattice constant.For large n_(0),the exact solution demonstrates that there is a midgap flat band with zero energy in the absence of Hubbard interaction.Each Moiréunit cell contributes two zero energy levels to the flat band.In the presence of Hubbard interaction,the midgap physics is demonstrated to be well described by a uniform Hubbard chain in which the effective hopping and on-site interaction strength can be controlled by the amplitude and period of the external field.Numerical simulations are performed to demonstrate the correlated behaviors in the finite-sized Moiré Hubbard system,including the existence of an η-pairing state and bound pair oscillation.This finding provides a method to enhance the correlated effect by a spatially periodic external field.展开更多
Urban mobility is a critical contributor to greenhouse gas emissions,accounting for over 30%of urban carbon emissions in the United States in 2021.Addressing this challenge requires a comprehensive and data-driven app...Urban mobility is a critical contributor to greenhouse gas emissions,accounting for over 30%of urban carbon emissions in the United States in 2021.Addressing this challenge requires a comprehensive and data-driven approach to transform transportation systems into sustainable networks.This paper presents an integrated framework that leverages artificial intelligence(AI),machine learning(ML),and life cycle assessment(LCA)to analyze,model,and optimize urban mobility.The framework consists of four key components:AI-powered analysis and models,synthetic urban mobility data generation,LCA for environmental footprint analysis,and data-driven policy interventions.By combining these elements,the framework not only deciphers complex mobility patterns but also quantifies their environmental impacts,providing actionable insights for policy decisions aimed at reducing carbon emissions and promoting sustainable urban transportation.The implications of this approach extend beyond individual cities,offering a blueprint for global sustainable urban mobility.展开更多
The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the v...The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the viscosity and temperature of hypoeutectic Al-5%Si and eutectic Al- 12.5%Si alloy melts is approximately exponential except for some special zones, but that of the hypereutectic melt is different. The paper discussed the correlation of the viscosity and atomic density, which is thought that the viscosity corresponds to the atomic density to some extent.展开更多
More requirements of electromagnetic interference(EMI) shielding performance are put forward for lightweight structural materials due to the development of aerospace and 5G communications. Herein, graphene oxide(GO) d...More requirements of electromagnetic interference(EMI) shielding performance are put forward for lightweight structural materials due to the development of aerospace and 5G communications. Herein, graphene oxide(GO) decorated with SnO_(2) coating is introduced as reinforcement into AZ31 Mg alloy. During the smelting process, the MgO layer is in situ gernerated at interface between GO and the molten Mg alloy matrix by consuming SnO_(2). In the solid state, such kind of interface structure can improve the GO-Mg interface bonding intensity,also significantly generate stacking faults. The AZ31 composite reinfoced by trace modified GO(0.1 wt%) exhibits high ultimate strength and almost the same elongation with AZ31 alloy. Compared with AZ31 alloy, the yield strength and ultimate tensile strength of composite are increased by 33.5% and 23.7%, respectively. Meanwhile, the multi-level electromagnetic reflection from the multi-layer structure of GO and the interface polarization caused by the MgO mid-layer can significantly improve EMI shielding performance. The appropriate interface design strategy achieves the effect of “two birds with one stone”.展开更多
Rotary swaging processing on commercial as-cast pure Mg has been carried out. Bulk texture variation with the processing passes was investigated using large gauge volume by neutron diffraction, of which results showed...Rotary swaging processing on commercial as-cast pure Mg has been carried out. Bulk texture variation with the processing passes was investigated using large gauge volume by neutron diffraction, of which results showed a combination of different components such as {00.2} basal fibre and two weak {10.0} and {11.0} fibres. Asymmetric distribution of the basal fibre around swaging direction was observed and being related to the processing parameters. Texture gradient analysis by synchrotron radiation demonstrates a non-uniform deformation of the RS processed pure Mg from surface to the centre.展开更多
Inorganic solid-state electrolytes(SSEs)are nonflammable alternatives to the commercial liquid-phase electrolytes.This enables the use of lithium(Li)metal as an anode,providing high-energy density and improved stabili...Inorganic solid-state electrolytes(SSEs)are nonflammable alternatives to the commercial liquid-phase electrolytes.This enables the use of lithium(Li)metal as an anode,providing high-energy density and improved stability by avoiding unwanted liquid-phase chemical reactions.Among the different types of SSEs,the garnet-type electrolytes witness a rapid development and are considered as one of the top candidates to pair with Li metal due to their high ionic conductivity,thermal,and electrochemical stability.However,the large resistances at the interface between garnet-type electrolytes and cathode/anode are the major bottlenecks for delivering desirable electrochemical performances of all-solid-state batteries(SSBs).The electrolyte/anode interface also suffers from metallic dendrite formation,leading to rapid performance degradation.This is a fundamental material challenge due to the poor contact and wettability between garnet-type electrolytes with electrode materials.Here,we summarize and analyze the recent contributions in mitigating such materials challenges at the interface.Strategies used to address these challenges are divided into different categories with regard to their working principles.On one hand,progress has been made in the anode/garnet interface,such as the successful application of Li-alloy anode and different artificial interlayers,significantly improving interfacial performance.On the other hand,the desired cathode/garnet interface is still hard to reach due to the complex chemical and physical structure at the cathode.The common methods used are nanostructured cathode host and sintering additives for increasing the contact area.On the basis of this information,we present our views on the remaining challenges and future research of electrode/garnet interface.This review not only motivates the need for further understanding of the fundamentals,stability,and modifications of the garnet/electrode interfaces but also provides guidelines for the future design of the interface for SSB.展开更多
基金supported by the following grants:The National Key R&D program of China under grants 2018YFA0404201the National Natural Science Foundation of China(NSFC)No.12022502,No.12205314,No.12105301,No.12261160362,No.12105294,No.U1931201,No.12393851,No.12393854+1 种基金In Thailand,support was provided by the National Science and Technology Development Agency(NSTDA)the National Research Council of Thailand(NRCT)under the High-Potential Research Team Grant Program(N42A650868).
文摘KM2A is one of the main sub-arrays of LHAASO,working on gamma ray astronomy and cosmic ray physics at energies above 10 TeV.Detector simulation is the important foundation for estimating detector performance and data analysis.It is a big challenge to simulate the KM2A detector in the framework of Geant4 due to the need to track numerous photons from a large number of detector units(>6000)with large altitude difference(30)and huge coverage(1.3).In this paper,the design of the KM2A simulation code G4KM2A based on Geant4 is introduced.The process of G4KM2A is optimized mainly in memory consumption to avoid memory overflow.Some simplifications are used to significantly speed up the execution of G4KM2A.The running time is reduced by at least 30 times compared to full detector simulation.The particle distributions and the core/angle resolution comparison between simulation and experimental data of the full KM2A array are also presented,which show good agreement.
基金Supported by the National Key R&D Program of China(2018YFA0404201,2018YFA0404202,2018YFA0404203,2018YFA0404204)the National Natural Science Foundation of China(12022502,12205314,12105301,12261160362,12105294,U1931201)+2 种基金the Youth Innovation Promotion Association CAS(2022010)in Thailand by the National Science and Technology Development Agency(NSTDA)the National Research Council of Thailand(NRCT):High-Potential Research Team Grant Program(N42A650868)。
文摘The full array of the Large High Altitude Air Shower Observatory(LHAASO)has been in operation since July 2021.For its kilometer-square array(KM2A),we optimized the selection criteria for very high and ultrahigh energyγ-rays using data collected from August 2021 to August 2022,resulting in an improvement in significance of the detection in the Crab Nebula of approximately 15%,compared with that of previous cuts.With the implementation of these new selection criteria,the angular resolution was also significantly improved by approximately 10%at tens of TeV.Other aspects of the full KM2A array performance,such as the pointing error,were also calibrated using the Crab Nebula.The resulting energy spectrum of the Crab Nebula in the energy range of 10-1000 TeV are well fitted by a log-parabola model,which is consistent with the previous results from LHAASO and other experiments.
基金supported by the National Natural Science Foundation of China(12393851,12261160362,12393852,12393853,12393854,12022502,2205314,12105301,12105292,12105294,12005246,and 12173039)Department of Science and Technology of Sichuan Province(24NSFJQ0060 and 2024NSFSC0449)+5 种基金Project for Young Scientists in Basic Research of Chinese Academy of Sciences(YSBR-061,2022010)Thailand by the National Science and Technology Development Agency(NSTDA)National Research Council of Thailand(NRCT):High-Potential Research Team Grant Program(N42A650868)the Chengdu Management Committee of Tianfu New Area for constant financial support to research with LHAASO datathe Milky Way Imaging Scroll Painting(MWISP)project,sponsored by the National Key R&D Program of China(2023YFA1608000 and 2017YFA0402701)the CAS Key Research Program of Frontier Sciences(QYZDJ-SSW-SLH047)。
文摘Theγ-ray emission from the W51 complex is widely acknowledged to be attributed to the interaction between the cosmic rays(CRs)accelerated by the shock of supernova remnant(SNR)W51C and the dense molecular clouds in the adjacent star-forming region,W51B.However,the maximum acceleration capability of W51C for CRs remains elusive.Based on observations conducted with the Large High Altitude Air Shower Observatory(LHAASO),we report a significant detection ofγrays emanating from the W51 complex,with energies from 2 to 200 TeV.The LHAASO measurements,for the first time,extend theγ-ray emission from the W51 complex beyond 100 TeV and reveal a significant spectrum bending at tens of TeV.By combining the"π^(0)-decay bump"featured data from Fermi-LAT,the broadbandγ-ray spectrum of the W51 region can be well-characterized by a simple pp-collision model.The observed spectral bending feature suggests an exponential cutoff at~400 TeV or a power-law break at~200 TeV in the CR proton spectrum,most likely providing the first evidence of SNRs serving as CR accelerators approaching the PeV regime.Additionally,two young star clusters within W51B could also be theoretically viable to produce the most energeticγrays observed by LHAASO.Our findings strongly support the presence of extreme CR accelerators within the W51 complex and provide new insights into the origin of Galactic CRs.
文摘First evidence of a structure in the J/ψΛinvariant mass distribution is obtained from an amplitude analysis of■b^(-)J/ψΛK^(-)decays.The observed structure is consistent with being due to a charmonium pentaquark with strangeness with a significance of 3.1r including systematic uncertainties and lookelsewhere effect.Its mass and width are determined to be 4458:8±2:9t4:7-1:1 MeV and 17:3±6:5t8:0-5:7 MeV,respectively,where the quoted uncertainties are statistical and systematic.The structure is also consistent with being due to two resonances.In addition,the narrow excited■^(-)states,N■(1690)and■(1820),are seen for the first time in a■b^(-)decay,and their masses and widths are measured with improved precision.The analysis is performed using pp collision data corresponding to a total integrated luminosity of 9 fb^(-1),collected with the LHCb experiment at centre-of-mass energies of 7,8 and 13 TeV.
基金The project support from CERN and from the national agencies:CAPES,CNPq,FAPERJ and FINEP(Brazil)MOST and NSFC(China)+18 种基金CNRS/IN2P3(France)BMBF,DFG and MPG(Germany)INFN(Italy)NWO(Netherlands)MNiSW and NCN(Poland)MEN/IFA(Romania)MICINN(Spain)SNSF and SER(Switzerland)NASU(Ukraine)STFC(United Kingdom)DOE NP and NSF(USA).We acknowledge the computing resources that are provided by CERN,IN2P3(France),KIT and DESY(Germany),INFN(Italy),SURF(Netherlands),PIC(Spain),GridPP(United Kingdom),CSCS(Switzerland),IFIN-HH(Romania),CBPF(Brazil),Polish WLCG(Poland)and NERSC(USA).Individual groups or members have received support from ARC and ARDC(Australia)Minciencias(Colombia)AvH Foundation(Germany)EPLANET,Marie Sklodowska-Curie Actions and ERC(European Union)A*MIDEX,ANR,IPhU and Labex P2IO,and Région Auvergne-RhôneAlpes(France)Key Research Program of Frontier Sciences of CAS,CAS PIFI,CAS CCEPP,Fundamental Research Funds for the Central Universities,and Sci.&Tech.Program of Guangzhou(China)GVA,XuntaGal,GENCAT and Prog.Atracción Talento,CM(Spain)SRC(Sweden)the Leverhulme Trust,the Royal Society and UKRI(United Kingdom).
文摘A first search for the Ξ_(bc)^(+)J/ψΞ_(c)^(+) decay is performed by the LHCb experiment with a data sample of proton-proton collisions, corresponding to an integrated luminosity of 9 fb−1 recorded at centre-of-mass energies of 7, 8, and 13 TeV. Two peaking structures are seen with a local (global) significance of 4.3(2.8) and 4.1(2.4) standard deviations at masses of 6571 and 6694 MeV/c2, respectively. Upper limits are set on the Ξ+bc baryon production cross-section times the branching fraction relative to that of the B+c→J/ψD+s decay at centre-of-mass energies of 8 and 13 TeV, in the Ξ+bc and in the B+c rapidity and transverse-momentum ranges from 2.0 to 4.5 and 0 to 20GeV/c, respectively. Upper limits are presented as a function of the Ξ+bc mass and lifetime.
文摘A search for the rare decays W^(+)→D_(s)^(+)γ and Z→D0γis performed using proton-proton collision data collected by the LHCb experiment at a centre-of-mass energy of 13TeV,corresponding to an integrated luminosity of 2.0fb−1.No significant signal is observed for either decay mode and upper limits on their branching fractions are set using W^(+)→D_(s)^(+)γ and Z→μ+μ−decays as normalization channels.The upper limits are 6.5×10^(−4) and 2.1×10^(−3) at 95% confidence level for the W^(+)→D_(s)^(+)γ and Z→D^(0)γ decay modes,respectively.This is the first reported search for the Z→D^(0)γ decay,while the upper limit on the W+→D+sγbranching fraction improves upon the previous best limit.
基金CAPES,CNPq,FAPERJ and FINEP(Brazil)MOST and NSFC(China)+18 种基金CNRS/IN2P3(France)BMBF,DFG,MPG(Germany)INFN(Italy)NWO(Netherlands)MNiSW,NCN(Poland)MEN/IFA(Romania)MSHE(Russia)MICINN(Spain)SNSF,SER(Switzerland)NASU(Ukraine)STFC(United Kingdom)DOE NP,NSF(USA).We acknowledge the computing resources that are provided by CERN,IN2P3(France),KIT and DESY(Germany),INFN(Italy),SURF(Netherlands),PIC(Spain),GridPP(United Kingdom),RRCKI and Yandex LLC(Russia),CSCS(Switzerland),IFIN-HH(Romania),CBPF(Brazil),PL-GRID(Poland)and NERSC(USA)AvH Foundation(Germany)EPLANET,Marie Sklodowska-Curie Actions and ERC(European Union)A*MIDEX,ANR,Labex P2IO and OCEVU,Region Auvergne-Rhdne-Alpes(France)Key Research Program of Frontier Sciences of CAS,CAS PIFI,CAS CCEPP,Fundamental Research Funds for the Central Universities,and Sci.Tech.Program of Guangzhou(China)RFBR,RSF and Yandex LLC(Russia)GVA,XuntaGal,GENCAT(Spain)the Leverhulme Trust,the Royal Society and UKRI(United Kingdom)。
文摘The first search for the doubly heavyΩ^(0)_(bc)baryon and a search for the E^(0)_(bc)baryon are performed using pp collision data collected via the LHCb experiment from 2016 to 2018 at a centre-of-mass energy of 13 TeV,corresponding to an integrated luminosity of 5.2 fb^(-1).The baryons are reconstructed via their decays to Λ^(+)_(c)π^(-)and E^(+)_(c)π^(-).No significant excess is fbund for invariant masses between 6700 and 7300 MeV/c^(2),in a rapidity range from 2.0 to 4.5 and a transverse momentum range from 2 to 20 MeV/c.Upper limits are set on the ratio of the Ω^(0)_(bc)and E^(0)_(bc)production cross-section times the branching fraction to Λ^(+)_(c)π^(-)(E^(+)_(c)π^(-))relative to that of the Λ^(0)_(b)(E^(0)_(b))baryon,for different lifetime hypotheses,at 95%confidence level.The upper limits range from 0.5 x 10^(-4)to 2.5 x 10^(-4)for theΩ^(0)_(bc)→Λ^(+)_(c)π^(-)(E^(0)_(bc)→Λ^(+)_(c)π^(-))decay,and from 1.4x 10^(-3)to 6.9 x 10^(-3)for theΩ^(0)_(bc)→E^(+)_(c)π^(-)(E^(0)_(bc)→E^(+)_(c)π^(-))decay,depending on the considered mass and lifetime of theΩ^(0)_(bc)(E^(0)_(bc))baryon.
基金supported by the National Key R&D program of China under grants 2018YFA0404201This research work is also supported by the National Natural Science Foundation of China,with NSFC Grants No.11635011,No.11761141001,No.11905240,No.12105293,No.12105294,No.U2031103,No.U1831208,No.11503021,No.11205126,No.11947404,and No.11675187+2 种基金by IHEP innovation project No.E25451U2by the Science and Technology Department of Sichuan Province 2021YFSY0031by the Xiejialin Foundation of IHEP No.E2546IU2,by RTA6280002 from Thailand Science Research and Innovation in Thailand.
文摘Introduction One of main scientific goals of the Large High Altitude Air Shower Observatory(LHAASO)is to accurately measure the energy spectra of different cosmic ray compositions around the‘knee’region.The Wide Field-of-View(FoV)Cherenkov Telescope Array(WFCTA),which is one of the main detectors of LHAASO and has 18 telescopes,is built to achieve this goal.Multiple telescopes are put together and point to connected directions for a larger FoV.Method Telescopes are deployed spatially as close as possible,but due to their own size,the distance between two adjacent telescopes is about 10 m.Therefore,the Cherenkov lateral distribution and the parallax between the two telescopes should be considered in the event building process for images crossing over the boundaries of FoVs of the telescopes.An event building method for Cherenkov images measured by multiple telescopes of WFCTA is developed.The performance of the shower measurements using the combined images is evaluated by comparing with showers that are fully contained by a virtual telescope in simulation.Results and conclusion It is proved that the developed event building process can help to increase the FoV of WFCTA by 30%while maintaining the same reconstruction quality,compared to the separate telescope reconstruction method.
基金Supported in China by National Key R&D program of China(2018YFA0404201,2018YFA0404202,2018YFA0404203,2018YFA0404204)NSFC(U2031101,11475141,12147208)in Thailand by RTA6280002 from Thailand Science Research and Innovation。
文摘The Large High Altitude Air Shower Observatory(LHAASO)has three sub-arrays,KM2A,WCDA,and WFCTA.The flux variations of cosmic ray air showers were studied by analyzing the KM2A data during a thunderstorm on June 10,2021.The number of shower events that meet the trigger conditions increases significantly in atmospheric electric fields,with a maximum fractional increase of 20%.The variations in trigger rates(increases or decreases)were found to be strongly dependent on the primary zenith angle.The flux of secondary particles increased significantly,following a trend similar to that of shower events.To better understand the observed behavior,Monte Carlo simulations were performed with CORSIKA and G4KM2A(a code based on GEANT4).We found that the experimental data(in saturated negative fields)were in good agreement with the simulations,assuming the presence of a uniform electric field of-700 V/cm with a thickness of 1500 m in the atmosphere above the observation level.Due to the acceleration/deceleration by the atmospheric electric field,the number of secondary particles with energy above the detector threshold was modified,resulting in the changes in shower detection rate.
基金support from AvH Foundation(Germany)EPLANET,Marie Sk lodowska-Curie Actions and ERC(European Union)+11 种基金A*MIDEXANRLabex P2IOOCEVURégion Auvergne-Rh?ne-Alpes(France)Key Research Program of Frontier Sciences of CASCAS PIFIThousand Talents ProgramSci.&Tech.Program of Guangzhou(China)RFBR,RSF and Yandex LLC(Russia)GVA,Xunta Gal and GENCAT(Spain)the Royal Society and the Leverhulme Trust(United Kingdom)。
文摘A search for the rare decay B^(0)→J/ψФis performed using Pp collision data collected with the LHCb dete-ctor at centre-of-mass energies of 7,8 and 13 TeV,corresponding to an integrated luminosity of9 fb.No significant signal of the decay is observed and an upper limitof 1.1x 10^(-7)at 90%confidence level is set on the branching fraction.
文摘In order to reduce high calibration pressure in hydroforming of components with too small radii, a method wasproposed to manufacture automotive hollow components with rectangular shape by relatively lower pressure. Theprocess is simulated and analyzed. It is thought that the friction force between the die surface and tube is a mainreason that high pressure is needed to form small radii. Using the method proposed in this paper, a petal-like sectionshape is first preformed so that the central zones of the four sides of the preform section do not contact with the diesides, thus the tube metal is easy to flow into the transition radii area in calibration stage. Moreover, a positive forcealong the sides is produced by the internal pressure, which is beneficial to overcome the friction force and push thematerial into the radii. Therefore, the pressure for forming the transition radii is greatly reduced and the componentswith small radii can be formed with relatively lower pressure. For the experimental case conducted in this paper, theforming pressure is reduced by about 28.6% than the estimated forming pressure.
基金the National Key Research and Development Program of China(No.2019YFA0705300,2021YFB3702502)the National Natural Science Foundation of China(Nos.52001191,52127807,52271035)+4 种基金Natural Science Foundation of Shanghai(No.23ZR1421500)SPMI Project from Shanghai Academy of Spaceflight Technology(No.SPMI2022-06)Independent Research Project of State Key Laboratory of Advanced Special Steel,Shanghai Key Laboratory of Advanced FerrometallurgyShanghai University(No.SKLASS 2022-Z10)the Science and Technology Commission of Shanghai Municipality(No.19DZ2270200).
文摘Rapid cooling and solidification during laser additive manufacturing(LAM)can produce ultra-fine microstructure with higher strength.However,the non-uniform cell/grain structure can easily result in early stress concentration and fracture during deformation,which remains a major challenge for the LAM field.Using Al-12Si as the model alloy,we employed the external static magnetic field(SMF)to modulate the laser powder bed fusion process(L-PBF),demonstrating a uniform microstructure with a refined cell structure.The mechanical properties show that the SMF can produce a combination of high tensile strength of 451.4±0.5 MPa and large uniform elongation of 10.4%±0.79%,which are superior to those of previously-reported Al-Si alloys with post-treatment or element alloying.The mechanism analysis based on multi-scale simulation reveals the determining role of SMF in rapid solidification,and this method is applicable to the microstructure control of other metallic materials during LAM.
基金supported by the National Natural Science Foundation of China(Grant Nos.12305026 and 12374461)。
文摘A Moirésystem is formed when two periodic structures have a slightly mismatched period,resulting in unusual strongly correlated states in the presence of particle-particle interactions.The periodic structures can arise from the intrinsic crystalline order and periodic external field.We investigate a one-dimensional Hubbard model with periodic on-site potential of period n_(0),which is commensurate to the lattice constant.For large n_(0),the exact solution demonstrates that there is a midgap flat band with zero energy in the absence of Hubbard interaction.Each Moiréunit cell contributes two zero energy levels to the flat band.In the presence of Hubbard interaction,the midgap physics is demonstrated to be well described by a uniform Hubbard chain in which the effective hopping and on-site interaction strength can be controlled by the amplitude and period of the external field.Numerical simulations are performed to demonstrate the correlated behaviors in the finite-sized Moiré Hubbard system,including the existence of an η-pairing state and bound pair oscillation.This finding provides a method to enhance the correlated effect by a spatially periodic external field.
基金supported by the National Science Foundation(NSF)under Grant No.2125326,2114197,2228533,2402438,and Northeastern University iSUPER Impact Engine.
文摘Urban mobility is a critical contributor to greenhouse gas emissions,accounting for over 30%of urban carbon emissions in the United States in 2021.Addressing this challenge requires a comprehensive and data-driven approach to transform transportation systems into sustainable networks.This paper presents an integrated framework that leverages artificial intelligence(AI),machine learning(ML),and life cycle assessment(LCA)to analyze,model,and optimize urban mobility.The framework consists of four key components:AI-powered analysis and models,synthetic urban mobility data generation,LCA for environmental footprint analysis,and data-driven policy interventions.By combining these elements,the framework not only deciphers complex mobility patterns but also quantifies their environmental impacts,providing actionable insights for policy decisions aimed at reducing carbon emissions and promoting sustainable urban transportation.The implications of this approach extend beyond individual cities,offering a blueprint for global sustainable urban mobility.
文摘The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the viscosity and temperature of hypoeutectic Al-5%Si and eutectic Al- 12.5%Si alloy melts is approximately exponential except for some special zones, but that of the hypereutectic melt is different. The paper discussed the correlation of the viscosity and atomic density, which is thought that the viscosity corresponds to the atomic density to some extent.
基金financial support provided by the National Natural Science Foundation of China (No.52174357)Fundamental Research Funds for the Central Universities (No.DUT21LAB132)。
文摘More requirements of electromagnetic interference(EMI) shielding performance are put forward for lightweight structural materials due to the development of aerospace and 5G communications. Herein, graphene oxide(GO) decorated with SnO_(2) coating is introduced as reinforcement into AZ31 Mg alloy. During the smelting process, the MgO layer is in situ gernerated at interface between GO and the molten Mg alloy matrix by consuming SnO_(2). In the solid state, such kind of interface structure can improve the GO-Mg interface bonding intensity,also significantly generate stacking faults. The AZ31 composite reinfoced by trace modified GO(0.1 wt%) exhibits high ultimate strength and almost the same elongation with AZ31 alloy. Compared with AZ31 alloy, the yield strength and ultimate tensile strength of composite are increased by 33.5% and 23.7%, respectively. Meanwhile, the multi-level electromagnetic reflection from the multi-layer structure of GO and the interface polarization caused by the MgO mid-layer can significantly improve EMI shielding performance. The appropriate interface design strategy achieves the effect of “two birds with one stone”.
文摘Rotary swaging processing on commercial as-cast pure Mg has been carried out. Bulk texture variation with the processing passes was investigated using large gauge volume by neutron diffraction, of which results showed a combination of different components such as {00.2} basal fibre and two weak {10.0} and {11.0} fibres. Asymmetric distribution of the basal fibre around swaging direction was observed and being related to the processing parameters. Texture gradient analysis by synchrotron radiation demonstrates a non-uniform deformation of the RS processed pure Mg from surface to the centre.
基金Engineering and Physical Sciences Research Council,Grant/Award Number:EP/S018204/1。
文摘Inorganic solid-state electrolytes(SSEs)are nonflammable alternatives to the commercial liquid-phase electrolytes.This enables the use of lithium(Li)metal as an anode,providing high-energy density and improved stability by avoiding unwanted liquid-phase chemical reactions.Among the different types of SSEs,the garnet-type electrolytes witness a rapid development and are considered as one of the top candidates to pair with Li metal due to their high ionic conductivity,thermal,and electrochemical stability.However,the large resistances at the interface between garnet-type electrolytes and cathode/anode are the major bottlenecks for delivering desirable electrochemical performances of all-solid-state batteries(SSBs).The electrolyte/anode interface also suffers from metallic dendrite formation,leading to rapid performance degradation.This is a fundamental material challenge due to the poor contact and wettability between garnet-type electrolytes with electrode materials.Here,we summarize and analyze the recent contributions in mitigating such materials challenges at the interface.Strategies used to address these challenges are divided into different categories with regard to their working principles.On one hand,progress has been made in the anode/garnet interface,such as the successful application of Li-alloy anode and different artificial interlayers,significantly improving interfacial performance.On the other hand,the desired cathode/garnet interface is still hard to reach due to the complex chemical and physical structure at the cathode.The common methods used are nanostructured cathode host and sintering additives for increasing the contact area.On the basis of this information,we present our views on the remaining challenges and future research of electrode/garnet interface.This review not only motivates the need for further understanding of the fundamentals,stability,and modifications of the garnet/electrode interfaces but also provides guidelines for the future design of the interface for SSB.
