期刊文献+

The Effect of Annealing Temperature and Reactive Gases on Optical Properties of Cu<sub>2</sub>O Thin Films 被引量:1

The Effect of Annealing Temperature and Reactive Gases on Optical Properties of Cu<sub>2</sub>O Thin Films
下载PDF
导出
摘要 The Cu<sub>2</sub>O thin films were synthesized by using RF sputtering technique. Comparisons were made with films created by deposition at room temperature followed by thermal annealing between 100°C and 400°C and using different gases, oxygen (O<sub>2</sub>) (oxidizing and reactive gas) and nitrogen (N<sub>2</sub>) (inert gas), besides air. The thickness of the thin films was kept constant, around 2000 <span style="white-space:nowrap;"><span style="white-space:nowrap;">&Aring;</span></span> (Angstrom). In addition, the RF power and pressure deposition were kept constant, as well. The thin films were evaluated for a range of wavelengths between 200 nm and 400 nm (Ultra Violet spectrum), 400 nm and 700 nm (Visible spectrum), 700 nm and 800 nm (Infrared spectrum) for both, optical transmittance and photoluminescence. From the experimental results, the higher annealing temperature and the introduction of nitrogen (N<sub>2</sub>) gas produced the following results: the optical bandgap for the Cu<sub>2</sub>O was found to be 2.23 eV and photoluminescence peaks were around 551 nm and 555 nm, which matched the theoretical analyses. Overall, there was a decrease in the optical bandgap of the Cu<sub>2</sub>O from 2.56 eV at room temperature to 2.23 eV for the film annealed in nitrogen gas at 400°C. This indicates that the Cu<sub>2</sub>O is a potential candidate in solar cell applications. The Cu<sub>2</sub>O thin films were synthesized by using RF sputtering technique. Comparisons were made with films created by deposition at room temperature followed by thermal annealing between 100°C and 400°C and using different gases, oxygen (O<sub>2</sub>) (oxidizing and reactive gas) and nitrogen (N<sub>2</sub>) (inert gas), besides air. The thickness of the thin films was kept constant, around 2000 <span style="white-space:nowrap;"><span style="white-space:nowrap;">&Aring;</span></span> (Angstrom). In addition, the RF power and pressure deposition were kept constant, as well. The thin films were evaluated for a range of wavelengths between 200 nm and 400 nm (Ultra Violet spectrum), 400 nm and 700 nm (Visible spectrum), 700 nm and 800 nm (Infrared spectrum) for both, optical transmittance and photoluminescence. From the experimental results, the higher annealing temperature and the introduction of nitrogen (N<sub>2</sub>) gas produced the following results: the optical bandgap for the Cu<sub>2</sub>O was found to be 2.23 eV and photoluminescence peaks were around 551 nm and 555 nm, which matched the theoretical analyses. Overall, there was a decrease in the optical bandgap of the Cu<sub>2</sub>O from 2.56 eV at room temperature to 2.23 eV for the film annealed in nitrogen gas at 400°C. This indicates that the Cu<sub>2</sub>O is a potential candidate in solar cell applications.
作者 Radu Bunea Ashwin Kumar Saikumar Kalpathy Sundaram Radu Bunea;Ashwin Kumar Saikumar;Kalpathy Sundaram(University of Central Florida, Orlando, FL, USA)
出处 《Materials Sciences and Applications》 2021年第5期182-196,共15页 材料科学与应用期刊(英文)
关键词 Cu<sub>2</sub>O Thin Film Optical Properties Bandgap Photoluminescence Cu<sub>2</sub>O Thin Film Optical Properties Bandgap Photoluminescence
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部