摘要
随着卷烟市场的个性化需求的增长,异型包装的卷烟产品的销量逐渐增加。异型包装卷烟规格包括烟支直径、长度与单包烟支数量与排列方式的不同。烟支直径分类:粗支Φ > 7.8 mm、中支Φ 6~7.3 mm、细支Φ 5.4~6 mm、超细支Φ < 5.4 mm,烟支长度分类:超长支、长支、正常长度、中支、短支,长度在45~120 mm范围内,单盒烟支数量:5、10、16、20支等。不同的烟支直径、长度与单包烟支数量与排列方式就导致其小盒包装的商标尺寸规格不同,在卷烟异型包装生产设备的设计开发中,商标的拾取、输送装置的设计必不可少,而且商标的拾取、输送装置需要能满足不同尺寸规格商标快速切换的要求。目前传统的卷烟生产设备,各个机构与传动链固定,要实现商标尺寸规格的转换,需要对设备商标拾取、输送部分整个模块及相关传动链进行改动,费用高、操作繁琐,不能满足不同规格商标之间快速切换的要求。同时,商标的喷胶、压钢印分别独立完成,其传输过程中需要投入大量的人力搬运,从而导致生产加工效率低,人力成本高。本文针对上述问题,提供一种能够简单、便捷的异型多规格卷烟产品的商标拾取、输送、喷胶、压钢印于一体的装置。
With the growth of personalized demand in the cigarette market, the sales of special-shaped packaging cigarette products have gradually increased. The specifications of shaped packaging cigarettes include the diameter and length of cigarettes and the number and arrangement of ciga-rettes in a single pack. Cigarette diameter classification: Thick branch Φ > 7.8 mm, medium branch Φ 6~7.3 mm, fine branch Φ 5.4~6 mm, ultra-fine branch Φ < 5.4 mm, cigarette length classification: Super long branch, long branch, normal length, medium branch, short branch, length in the range of 45~120 mm, the number of single box of cigarettes: 5, 10, 16, 20, etc. Different cigarette diameters, lengths, and the number and arrangement of single packs of cigarettes lead to different trademark size specifications of small box packaging. In the design and development of cigarette shaped packaging production equipment, the design of trademark picking and conveying device is essential, and the trademark picking and conveying device needs to meet the requirements of rapid switching of different size specifications of trademarks. At present, the traditional cigarette production equipment, each mechanism and the transmission chain are fixed, in order to achieve the conversion of trademark size specifications, it is necessary to change the whole module of the equipment trademark picking and conveying part and the related transmission chain, which is high cost and cumbersome operation, and can not meet the requirements of rapid switching between different specifications of trademarks. At the same time, the spray and stamping of trademarks are completed independently, and a lot of manpower is needed to handle them in the transmission process, resulting in low production and processing efficiency and high labor costs. Aiming at the above problems, this paper provides a simple and convenient device that can pick up, transport, spray glue and press steel marks of different shaped and multi-specification cigarette products.
出处
《仪器与设备》
2024年第1期79-84,共6页
Instrumentation and Equipments
