期刊文献+

芳纶纤维增强酚醛树脂摩擦材料的磨损机理研究 被引量:23

Wear Mechanisms of Kevlar Pulp Reinforced Phenolic Resin Friction Materials
下载PDF
导出
摘要 对芳纶增强酚醛树脂摩擦材料在模拟制动工况下的磨损机理进行了系统的实验研究 .结果表明 :在试验工况下 ,两种摩擦材料在与铸铁偶件对摩时均呈现粘着磨损和塑性变形特征 ;在高速和高压条件下塑性变形加剧 ,摩擦材料磨损表面可见熔融迹象 ;摩擦副接触表面发生材料的相互转移 ,两种摩擦材料均可在偶件表面形成转移膜 ,且在高速和高压条件下转移膜更易形成 ;Kevlar纤维作为增强相可以有效地提高摩擦材料的摩擦稳定性 ,并降低摩擦系数 ;摩擦材料的磨损机理主要为擦伤作用、粘着磨损和塑性变形 . The wear mechanisms of two kinds of Kevlar fiber reinforced phenolic resin frictional materials were investigated by scanning electron microscopy and energy dispersive spectroscopy. The results show that the frictional materials in sliding against cast iron counterpart present signs of adhesion wear and plastic deformation. The plastic deformation is accelerated at high sliding speed and normal load, which is accompanied by the localized melting on the worn surfaces. The inter-transfer between the frictional materials and the cast iron counterpart is also observed and a transfer film of the frictional materials is formed on the counterpart surface. It is easier for the transfer films of the frictional materials to be formed at higher sliding speed and normal load. Kevlar fiber as reinforcing agent helps to stabilize and lower the friction coefficient. The frictional materials are characterized by slight scuffing, adhesion and plastic deformation in sliding against the cast iron counterpart.
作者 马保吉 朱均
出处 《摩擦学学报》 EI CAS CSCD 北大核心 2001年第3期205-209,共5页 Tribology
基金 国家自然科学基金资助! (5 94370 3)
关键词 芳伦纤维 酚醛树脂 摩擦材料 磨损机理 Brakes Fibers Friction Phenolic resins Plastic deformation Wear of materials
  • 引文网络
  • 相关文献

参考文献1

二级参考文献1

共引文献25

同被引文献297

引证文献23

二级引证文献74

;
使用帮助 返回顶部