摘要
兰州重离子加速器冷却储存环主环注入线二极C型磁铁首次采用了磁极头中埋置垫补线圈调整磁场均匀度的设计 .在其磁场测量中 ,使用了点测和积分测量的方法对其各方面特性参数进行了测量 ,并对积分场的测量结果以及内置垫补线圈对均匀场的垫补效果进行了详细的非线性分析 .
The trimming coils embedded in poles of magnet are applied in the C-dipole prototypes of CSR. They are used to adjust the uniformity of magnetic fields through reducing outside magnetic field and augmenting inside. The impact of trimming currents on the uniformity of field and multipole components is carefully investigated by using the two kinds of magnetic measurements,hall sensor and long coil,respectively. It is proved that the uniformity which is better than ±1.0×10 -3 can be reached easily. At the same time,the quadrupole and sextupole components of fields have decreased to a low level through optimizing the trimming currents,but,unfortunately,the octupole and dodecapole will increase correspondingly. Finally,the two measured and calculated results are compared. There is very small difference between the results of the two measuring methods. However,all of the measured results are alien to the calculated one because of the insufficiency of the TOSCA calculation.
出处
《高能物理与核物理》
CSCD
北大核心
2003年第6期532-536,共5页
High Energy Physics and Nuclear Physics
基金
国家大科学工程---兰州重离子加速器冷却储存环 (HIRFL- CSR)资助~~
