摘要
激光清洗技术是一种绿色、高效、无接触的先进清洗技术。为探究碳钢表面锈蚀污染层的激光清洗工艺,利用红外纳秒激光器,基于正交试验主要研究了激光功率、扫描速度、扫描次数和线间距等工艺参数对除锈效果的影响规律。通过对激光清洗前后区域进行灰度化处理,并对灰度均值进行极差和方差分析,建立起基于灰度均值特征的碳钢除锈效果评价标准。结果表明,通过图像识别处理能够快速、准确确定碳钢表面状态,为后续激光清洗工艺提供量化评价指标。
Objective Carbon steel is widely used in various modern industrial fields because of its low price and good performance,but its surface easily oxidizes and rusts.Thus,it requires periodic cleaning and maintenance.As a green,efficient,and non-contact advanced cleaning technology,laser cleaning has attracted much attention from academia and industry.At the same time,image processing,as one of the commonly used laser cleaning quality evaluation methods,has attracted much attention because of its high efficiency.In order to explore the application of laser cleaning to the rust layer on the surface of carbon steel,an orthogonal test conducted using an infrared nanosecond laser is used to determine the influence of process parameters such as the laser power,scanning speed,scanning time,and filling spacing on the rust removal effect.An evaluation standard for the carbon steel derusting effect based on the gray mean feature is established through the grayscale image processing of an area before and after laser cleaning,along with the range and variance analyses of the gray mean.The goal is to use the image recognition method to quickly and accurately determine the surface state of carbon steel,and provide quantitative evaluation indicators for the subsequent laser cleaning process.Methods In this study,a laser derusting experiment is performed on corroded carbon steel using the Taguchi method to explore the application of the laser cleaning process to a metal surface and the influence of the main process parameters of the laser cleaning on the cleaning quality.Then,a grayscale image based on the experimental results is obtained,and the corresponding gray mean value is used as a quality characteristic to evaluate the rust removal effect.The optimal process parameter combination is determined based on the results of range and variance analyses.Finally,the optimal combination of process parameters is verified by experiments,and a laser cleaning process for carbon steel with a better cleaning effect is obtained.Results and D
作者
段家振
史如新
张伟
王庆
任显铭
Duan Jiazhen;Shi Ruxin;Zhang Wei;Wang Qing;Ren Xianming(Changzhou Power Supply Company,Jiangsu Electric Power Co.,Ltd.,State Grid,Changzhou 213000,Jiangsu,China)
出处
《中国激光》
EI
CAS
CSCD
北大核心
2024年第20期128-137,共10页
Chinese Journal of Lasers
基金
国网江苏省电力有限公司科技项目(J2023013)。
关键词
激光清洗
碳钢
正交试验
工艺参数
灰度特征
laser cleaning
carbon steel
Taguchi method
process parameters
gray feature
