摘要
固体火箭发动机长尾喷管周围一般安装有电子仪器,故而对喷管壳体表面温度有严格的限制。对于某长时间工作的发动机,为满足喷管壳体表面温度要求,同时降低消极质量,设计了一种新型双腔外绝热装置,以实现在较小的消极质量下具有较好的绝热性能。对该绝热装置进行了内流场及传热计算分析,而后进行了绝热结构优化及试验验证。结果表明:该双腔外绝热装置可以将长时间工作固体火箭发动机长尾喷管外壁温度从483℃降低至103℃,降低约78.7%;而采用同等材料同等质量的常规外防护装置只能从483℃降低至227℃,降低约53.0%;而要达到相同的防护效果,同等材料常规外防护装置的质量将增加约160%。双腔外绝热装置中段及尾端处温度随时间变化趋势与实测结果吻合较好,有望应用于其他长时间工作发动机。
Electronic instruments are usually installed around the long-tail nozzle of a solid rocket motor(SRM)with strictly limits the surface temperature of nozzle shell.For a long-time working SRM,in order to meet the requirements of the nozzle shell surface temperature,while reducing the negative mass,a new double-cavity external insulation device was designed,which has better thermal insulation performance under less negative mass.The internal flow field and heat transfer of this insulation device were calculated and analyzed,and then the insulation construction was optimized and tested.The results show that outer shell temperature of long-tail nozzle of the long-time working SRM is reduced from 483℃to 103℃,a decrease of about 78.7%.However,the conventional external protection device with the same material and the same mass can only reduce the temperature from 483℃to 227℃,about 53.0%lower;To achieve the same protection effect,mass of the conventional external insulation device with same material will be increased by about 160%.The changing trend of temperature with time at the middle and tail section of double-cavity external insulation device is in good agreement with the test data.This double-cavity external insulation device can also be applied to other long working time solid rocket motors.
作者
王相宇
向进
章惠君
王鹍鹏
余小波
朱雯娟
刘梦珂
马以博
WANG Xiangyu;XIANG Jin;ZHANG Huijun;WANG Kunpeng;YU Xiaobo;ZHU Wenjuan;LIU Mengke;MA Yibo(Hubei Institute of Aerospace Chemotechnology,Xiangyang 441003,China;China Airborne Missile Academy,Luoyang 471000,China)
出处
《固体火箭技术》
CAS
CSCD
北大核心
2024年第5期629-637,共9页
Journal of Solid Rocket Technology
关键词
固体火箭发动机
长时间工作
长尾喷管
外绝热装置
solid rocket motor
long-time working
long-tail nozzle
external insulation device
