摘要
在低FeO、低温出钢条件下,湘钢120 t转炉终渣化不透,针对此情况,通过对当前条件下终渣MgO饱和溶解度进行计算,尝试降低渣中MgO含量,采取减少物料加入量、适当提高出钢温度、调整加料方式和氧枪枪位等控制措施,不仅促进钢渣分离,降低了钢铁料消耗,而且使磷内控合格率有所提升,达到了提升溅渣护炉效果、稳定炉况的目的。
Under low FeO and low temperature steelmaking conditions,the final slag of Xianggang 120 t converter is not fully penetrated.In response to this situation,the saturation solubility of MgO in the final slag under current conditions is calculated,and the MgO content in the slag is attempted to be reduced.Control measures such as reducing material addition,appropriately increasing steelmaking temperature,adjusting feeding method,and oxygen gun position are taken to not only promote steel slag separation,reduce steel material consumption,but also increase the qualified rate of phosphorus internal control,achieving the goal of improving slag splashing protection effect and stabilizing furnace conditions.
作者
罗锐
唐武
韩建成
Luo Rui;Tang Wu;Han Jiancheng(Xiangtan Iron&Steel Group Co.,Ltd.,Xiangtan Hunan 411100,China)
出处
《山西冶金》
CAS
2024年第5期143-144,175,共3页
Shanxi Metallurgy
关键词
MGO
低FeO
出钢温度
冶炼枪位
终渣黏度
MgO
Low FeO
Steel tapping temperature
smelting gun position
final slag viscosity
