摘要
为了实现分布式联合守时系统建立需求,设计了远程时间比对系统,包含卫星共视、卫星双向和光纤双向三种时间比对手段,系统内使用的国产化设备比对精度与进口设备相当,实现了实验室间多手段、高精度钟差测量。使用移动校准站完成了时间比对设备相对零值校准,在相距50 km的实验室间开展长达20天的时间比对,试验结果表明,三种比对手段测量得到两地钟差均值相差小于1 ns,变化趋势相同,变化幅度相近,均可以准确测量得到两地钟差。
In order to meet the demand for distributed joint timekeeping system,a remote time comparison system was designed,which includes satellite co-visibility,satellite bi-directional,and fiber bi-directional time comparison means.The domestic equipment used in the system has the same time comparison accuracy as imported equipment,achieving high-precision clock difference measurement between laboratories using multiple means.The relative zero value calibration of the time comparison equipment was completed using a mobile calibration station,and a 20-day time comparison was conducted between laboratories that were 50km apart.The experimental results show that the mean clock difference measured by the three comparison means at the two locations is less than 1 ns,the trend is the same,and the amplitude is similar,and all can accurately measure the clock difference between the two locations.
作者
王崇阳
杜文丛
周云
刘铁强
孙建设
WANG Chongyang;DU Wencong;ZHOU Yun;LIU Tieqiang;SUN Jianshe(The 54th Research Institute of CETC,Shijiazhuang 050081,China;PLA Army Equipment Department Shijiazhuang 1st Region Military Representative Office,Shijiazhuang 050000,China;61711 Troops,PLA,Kashi 844000,China)
出处
《遥测遥控》
2024年第3期65-71,共7页
Journal of Telemetry,Tracking and Command
关键词
时间比对
移动校准站
零值校准
Time comparison
Mobile calibration station
Zero calibration
