摘要
背景:临床上迫切需要小口径人工血管来治疗冠状动脉和外周动脉疾病,目前,血管组织工程已成为制备小口径人工血管的主要方法,选择合适的生物材料和细胞来源是小口径组织工程血管构建成功的关键因素。目的:观察4种静电纺丝膜材料对骨髓间充质干细胞增殖、黏附及分化为血管平滑肌细胞的影响。方法:分离提取SD大鼠骨髓间充质干细胞。将骨髓间充质干细胞分别接种于聚己内酯(PCL)、聚己内酯-透明质酸(PCL-HA)、聚己内酯-丝素蛋白(PCL-SF)、聚己内酯-明胶(PCL-GEL)静电纺丝膜材料上,培养1,3,7 d后,扫描电镜下观察材料上的细胞排布,鬼笔环肽染色观察材料上的细胞增殖与黏附,qRT-PCR检测材料上细胞分泌的CD90、Meflin、转化生长因子βmRNA表达;向血管平滑肌细胞诱导分化7 d后,qRT-PCR检测材料上细胞ɑ-平滑肌肌动蛋白mRNA表达。结果与结论:①扫描电镜下可见骨髓间充质干细胞在4种静电纺丝膜上均沿着静电纺丝膜的纤维走向排列;②鬼笔环肽染色显示,骨髓间充质干细胞在4种静电纺丝膜上分布规律,均沿着纤维走向呈现平行分布,并且PCL-HA、PCL-SF、PCL-GEL静电纺丝膜较PCL静电纺丝膜更有利于骨髓间充质干细胞的增殖、黏附,PCL-SF静电纺丝膜相较于PCL-HA、PCL-GEL静电纺丝膜更有利于骨髓间充质干细胞的增殖、黏附;③qRT-PCR检测显示,4种静电纺丝膜材料均可维持骨髓间充质干细胞CD90和Meflin的mRNA表达,组间比较差异无显著性意义(P>0.05);PCL-HA、PCL-SF、PCL-GEL组培养1,7 d的转化生长因子βmRNA表达高于PCL组(P<0.05),PCL-SF组培养3,7 d的转化生长因子βmRNA表达高于其他3组(P<0.05),PCL-HA组培养7 d的转化生长因子βmRNA表达高于PCL-GEL组(P<0.05);④qRT-PCR检测显示,PCL-SF组ɑ-平滑肌肌动蛋白mRNA表达高于其他3组(P<0.05),PCL-HA组ɑ-平滑肌肌动蛋白mRNA表达高于PCL组(P<0.05);⑤结果表明:相较于PCL、PCL-HA
BACKGROUND:Small diameter artificial vessels are urgently needed to treat coronary artery and peripheral artery diseases in clinical practice.At present,vascular tissue engineering has become the main method for preparing small diameter artificial vessels.Selecting suitable biomaterials and cell sources is the key factor for successful construction of small diameter tissue engineered vessels.OBJECTIVE:To observe the effect of four kinds of electrospinning membrane materials on proliferation,adhesion and differentiation of bone marrow mesenchymal stem cells into vascular smooth muscle cells.METHODS:Bone marrow mesenchymal stem cells were isolated and extracted from SD rats.The bone marrow mesenchymal stem cells were inoculated separately on polycaprolactone(PCL),polycaprolactone-hyaluronic acid(PCL-HA),polycaprolactone-silk-filament proteins(PCL-SF),and polycaprolactonegelatin(PCL-GEL)electrospinning membrane materials.After 1,3,and 7 days of culture,the cell arrangement on the material was observed under scanning electron microscope.The proliferation and adhesion of the material were observed by phalloidin staining.The mRNA expressions of CD90,Meflin,and transforming growth factorβwere detected by qRT-PCR.After 7 days of induced differentiation into vascular smooth muscle cells,the mRNA expression ofɑ-smooth muscle actin on the material was detected by qRT-PCR.RESULTS AND CONCLUSION:(1)Bone marrow mesenchymal stem cells were arranged along the fibers of the four kinds of electrospinning membranes under scanning electron microscopy.(2)Phalloidin staining showed the regular distribution of bone marrow mesenchymal stem cells on the four kinds of electrospinning membranes and parallel distribution along the fiber direction.Moreover,PCL-HA,PCL-SF,and PCL-GEL electrospinning membranes were more conducive to the proliferation and adhesion of bone marrow mesenchymal stem cells than PCL electrospinning membranes.Compared with PCL-HA and PCLGEL electrospinning membranes,PCL-SF electrospinning membranes were more conduciv
作者
孙现娟
王秋花
张锦艺
杨杨杨
王文双
张晓晴
Sun Xianjuan;Wang Qiuhua;Zhang Jinyi;Yang Yangyang;Wang Wenshuang;Zhang Xiaoqing(School of Basic Medical Sciences,Binzhou Medical University,Department of Human Anatomy and Histoembryology,Joint Laboratory for International Cooperation in Biomaterials and Tissue Regeneration,Yantai 264003,Shandong Province,China;Department of Gynecology,Yantai Yuhuangding Hospital,Yantai 264000,Shandong Province,China)
出处
《中国组织工程研究》
CAS
北大核心
2025年第4期661-669,共9页
Chinese Journal of Tissue Engineering Research
基金
山东省自然科学基金-青年基金项目(ZR2021QC034),项目负责人:张晓晴
泰山学者青年项目(tsqn202103111),项目负责人:张晓晴。
关键词
骨髓间充质干细胞
小口径组织工程血管
静电纺丝
聚己内酯
聚己内酯-透明质酸
聚己内酯-丝素蛋白
聚己内酯-明胶
bone marrow mesenchymal stem cell
small diameter tissue engineered vessels
electrospinning
polycaprolactone
polycaprolactone-hyaluronic acid
polycaprolactone-silk fibroin
polycaprolactone-gelatin
