摘要
目前一体机柜火灾探测主要为被动监测,火灾现场温度升高及烟雾浓度达到一定的浓度,烟雾传感器采集信息后传递给系统,从而实现火灾报警和后续的灭火减灾,这种处置方法造成了火灾隐患大、救灾时间晚、灾害程度重等问题。为解决被动报警的弊端,采用基于4G网络和ARM处理器采用C语言开发主动探测软件,驱动主动吸入装置,并提升温度和烟雾传感器的敏感程度,增强主动探测预警系统的监测能力。同时,在激发火灾预警系统后,软件触发自动灭火设备,进而实现在火灾初期灭火目标,最大程度上降低火灾危害。
Currently,the integrated cabinet fire detection is mainly passive monitoring.When the temperature at the fire site rises and the smoke reaches a certain concentration,the smoke sensor collects information and transmits it to the system,thereby achieving fire alarm and subsequent fire extinguishing and disaster reduction.This disposal method has caused problems such as high fire hazards,late disaster relief time,and heavy disaster severity.To solve the drawbacks of passive alarm,the active detection software developed by using C language based on 4G network and ARM processor is adopted to drivethe active suction device,enhance the sensitivity of temperature and smoke sensors,and improve the monitoring ability of the active detection and warning system.At the same time,after activating the fire warning system,the software triggers automatic fire extinguishing equipment,thereby realizing the goal of extinguishing the fire in the early stages and minimizing the fire hazards.
作者
殷正保
Yin Zhengbao(Hubei Haishan Technology Co.,Ltd,Yichang 443000,Hubei,China)
出处
《船电技术》
2024年第5期45-48,共4页
Marine Electric & Electronic Engineering
关键词
4G网络
主动探测
一体机柜
智能灭火系统
软件设计
4G network
Active detection
integrated cabinet
intelligent fire extinguishing system
software design
