摘要
作为后处理厂的关键工艺设备,萃取柱、贮槽经常出现溶液浓度波动工况(即非均一工况),而对其进行临界安全分析时,技术人员假定浓度扩大若干倍来进行保守分析——这虽满足保守性要求,但引入了过多的临界裕量,限制了后处理工艺的处理效率和能力。为解决这些问题,本研究基于改进BP神经网络方法,利用大型蒙特卡罗程序MCNP,针对典型设备结构尺寸完成了随机浓度分布的梯度建模,实现了基于浓度分布预测有效增殖因子(k_(eff))的临界安全分析方法。数据测试结果表明,以本研究方法计算非均一工况k_(eff)的结果平均误差为1.82×10^(−4),损失函数均方差收敛值为3.34×10^(−6),远小于未改进的模型(2.4450×10^(−4))。同时与保守方法对比,本研究方法引入的临界裕量为–1.31×10^(−3),远小于传统方法(0.32951)。结果证明本研究方法在满足保守性的前提条件下,计算结果更精准、更有效,为后处理临界安全分析提供了方法参考。
As the key process equipment of reprocessing plant,the extraction column and storage tank often have the condition of fluctuating solution concentration(i.e.,non-uniform condition).When conducting critical safety analysis,technicians adopt the conservative method of enlarging concentration several times.Although this meets the conservative requirements,it introduces too much critical margin,which limits the treatment efficiency and capacity of reprocessing.In order to solve the above problems,based on the improved BP neural network method and the large-scale MC code MCNP,this study completed the gradient modeling of random concentration distribution for typical equipment structure size,and realized the critical safety analysis method of predicting effective proliferation factor(k_(eff))based on concentration distribution.Data test results show that the average error of k_(eff)calculated under non-uniform conditions by this method is 1.82×10^(−4),and the convergence value of loss function MSE is 3.34×10^(−6),which is far smaller than the unimproved model(2.4450×10^(−4)).At the same time,in comparison with the conservative method,the critical margin introduced by the proposed method is–1.31×10^(−3),which is much smaller than that of the traditional method(0.32951).The above results prove that the method in this study is more accurate and effective under the precondition of conservativeness,and provide a method reference for the critical safety analysis of reprocessing.
作者
孙铭泽
成昱廷
马骁笛
夏兆东
周琦
朱庆福
薛小刚
Sun Mingze;Cheng Yuting;Ma Xiaodi;Xia Zhaodong;Zhou Qi;Zhu Qingfu;Xue Xiaogang(China Institute of Atomic Energy,Beijing,102413,China)
出处
《核动力工程》
EI
CAS
CSCD
北大核心
2023年第6期16-22,共7页
Nuclear Power Engineering
