摘要
针对某型单缸农用柴油机在标定工况下铸铝齿轮室盖结构振动问题,采用现代信号处理技术结合有限元模态分析技术分析齿轮室盖的结构动态特性。首先采用变分模态分解方法(VMD)与同步压缩小波变换法(SWT)相结合的方法获取了齿轮室盖结构振动的主变分模态分量,分析其时频特性,然后通过频率响应法识别齿轮室盖结构的固有特性,分析两者相关性,在此基础上再利用有限元模态分析技术进一步研究齿轮室盖结构振动的模态特性,找到导致其动态特性变差的薄弱环节,最后采用加强筋结构改进设计措施提高齿轮室盖的模态频率,避开结构共振,优化结构动态特性。
Aiming at the structural vibration problem of cast aluminum gear chamber cover of a certain type of single cylinder agricultural diesel engine under calibration condition,the structural dynamic characteristics of gear chamber cover are analyzed by modern signal processing technology combined with finite element modal analysis technology.Firstly,the principal variation modal components of the structural vibration of the gear chamber cover are obtained by combining the Variational Mode Decomposition(VMD)method with the Synchronous Compression Wavelet Transform(SWT)method,and the time-frequency characteristics are analyzed.Then,the inherent characteristics of the gear chamber cover are identified by the frequency response method,and the correlation between them is analyzed.On this basis,the modal characteristics of the structural vibration of the gear chamber cover are further studied by using the finite element modal analysis technology,and the weak links that lead to the deterioration of its dynamic characteristics are found.Finally,the modal frequency of the gear chamber cover is increased,the structural resonance is avoided and the structural dynamic characteristics are optimized by using the measures of improved design of stiffener structure.
作者
孟浩东
赵景波
王勇
郭炎
戴旭东
徐年尧
Meng Haodong;Zhao Jingbo;Wang Yong;Guo Yan;Dai Xudong;Xu Nianyao(School of Automotive Engineering,Changzhou Institute of Technology,Changzhou,213032,China;Automotive Engineering Research Institute,Jiangsu University,Zhenjiang,212013,China)
出处
《中国农机化学报》
北大核心
2023年第11期87-92,共6页
Journal of Chinese Agricultural Mechanization
基金
国家自然科学基金面上项目(12172153)
江苏省高等学校基础科学(自然科学)研究重大项目(22KJA410001、21KJA130001)
江苏省产学研合作项目(BY2022137)
常州市应用基础研究计划项目(CJ20220182)。
关键词
农用柴油机
齿轮室盖
信号处理
动态特性
模态分析
agricultural diesel engine
gear chamber cover
signal processing
dynamic characteristics
modal analysis
