期刊文献+

考虑安装误差的ZC1蜗杆螺旋线偏差评定方法

Evaluation method of helix deviations for ZC1 worm considering installation errors
下载PDF
导出
摘要 安装误差对齿轮测量中心的测量结果影响较大。针对其中ZC1蜗杆螺旋线偏差评定问题,在齿轮测量中心ZC1蜗杆螺旋线测量原理基础上,分析了安装误差对蜗杆测量的影响机理,建立了安装误差修正模型,并依据螺旋线偏差定义建立了基于安装误差修正的ZC1蜗杆螺旋线偏差评定方法。在齿轮测量中心上对ZC1蜗杆开展了螺旋线偏差测量试验,得到初始安装状态和安装误差条件下的螺旋线偏差评定结果,对比初始安装状态,安装误差修正前后多次测量结果之间的最大差异由76.2μm降为4.2μm。提出的ZC1蜗杆螺旋线偏差评定方法可有效减小齿轮测量中心测量过程中安装误差对螺旋线偏差测量结果的影响。 The installation errors have great influence on the measurement results of gear measurement center(GMC).Focused on the problem of the ZC1 worm helix deviations evaluation method,based on the measurement principle of ZC1 worm helix in GMC,the influence mechanism of installation errors on worm measurement is analyzed.The installation error correction model is formulated,and the evaluation method of ZC1 worm helix deviations based on installation error correction is established according to the definition of helix deviations.The measurement of ZC1 worm helix deviations is implemented on the GMC,and the helix deviations evaluation results are obtained under the installation conditions.The maximum difference between the measurement results before and after the installation error correction is reduced from 76.2μm to 4.2μm.The ZC1 worm helix deviation evaluation method proposed can effectively eliminate the influence of installation errors on the helix deviations measurement results during the measurement of GMC.
作者 汤洁 王嘉伟 石照耀 Tang Jie;Wang Jiawei;Shi Zhaoyao(Faculty of Materials and Manufacturing,Beijing University of Technology,Beijing 100124,China;Beijing Engineering Research Center of Precision Measurement Technology and Instruments,Beijing 100124,China)
出处 《仪器仪表学报》 EI CAS CSCD 北大核心 2023年第4期181-188,共8页 Chinese Journal of Scientific Instrument
基金 国家重点研发计划子课题(2017YFF0204804)项目资助。
关键词 ZC1蜗杆 安装误差 螺旋线偏差 评定方法 齿轮测量中心 ZC1 worm installation errors helix deviation evaluation gear measurement center
  • 相关文献

参考文献5

二级参考文献71

共引文献39

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部