期刊文献+

34CrNi3MoV钢奥氏体晶粒分布规律

Austenite grain distribution law in 34CrNi3MoV steel
原文传递
导出
摘要 研究了不同保温温度及保温时间对34CrNi3MoV钢奥氏体晶粒长大的影响。通过金相法统计分析了保温温度、保温时间对晶粒平均尺寸、长轴、短轴的影响。结果表明,正态分布方程中标准差与期望大致随保温温度的升高而增加,随保温时间的延长而增加。晶粒长轴、短轴尺寸与平均尺寸关系密切,其比值呈简单的线性关系。晶粒长大的过程中,长轴与短轴的比例基本保持不变,并回归得到晶粒平均尺寸、长轴、短轴尺寸的分布概率表达式。同时在数学规律上对材料学中的遗传性提供一种新的思维方法及可能的解释思路。 Effects of different holding temperature and holding time on austenite grain growth of 34CrNi3MoV steel were studied.The effects of holding temperature and holding time on average grain size,major axis and minor axis were analyzed by means of metallography.The results show that in the Gaussian distribution equation,the standard deviation and expectation increase with the increase of holding temperature and holding time.The size of the major axis and minor axis of grains is closely related to the average size,and the ratio has a simple linear relationship.During the grain growth,the ratio of the major axis to the minor axis basically remains unchanged.The distribution probability expressions of average grain size,major axis size and minor axis size are obtained by regression.At the same time,a new way of thinking and possible explanation for the heredity in materials science in terms of mathematical laws is provided.
作者 郑冰 徐东 王怡群 王学玺 赵红阳 巨东英 Zheng Bing;Xu Dong;Wang Yiqun;Wang Xuexi;Zhao Hongyang;Ju Dongying(School of Materials and Metallurgy,University of Science and Technology Liaoning,Anshan Liaoning 114051,China;Technology Innovation Center for High Quality Cold Heading Steel of Hebei Province,Hebei University of Engineering,Handan Hebei 056038,China;Technology Center,Henan Zhongyuan Special Steel Equipment Manufacturing Co.,Ltd.,Jiyuan Henan 459008,China;Engineering Research Center for High Toughness Wind Tower Steel of Hebei Province,Hebei Puyang Iron and Steel Co.,Ltd.,Handan Hebei 056305,China;Whole Processes of High Quality Fastener Application Technology Research Center of Universities in Hebei Province,Hebei University of Engineering,Handan Hebei 056038,China)
出处 《金属热处理》 CAS CSCD 北大核心 2023年第7期1-7,共7页 Heat Treatment of Metals
基金 国家自然科学基金联合基金(NSFC)(U20A20272) 河北省军民科技协同创新专项(22351001D) 邯郸市科学研究计划重点项目(21122015004) 河北省高等学校科学技术研究项目(CXY2023004)。
关键词 34CrNi3MoV钢 奥氏体晶粒尺寸 保温温度 正态分布 遗传性 34CrNi3 MoV steel austenite grain size holding temperature Gaussian distribution heredity
  • 相关文献

参考文献12

二级参考文献67

  • 1赵成志,魏双胜,高亚龙,王艳华.超临界与超超临界汽轮机耐热钢的研究进展[J].钢铁研究学报,2007,19(9):1-5. 被引量:43
  • 2H. J. Mcqueen,J. J. Jonas.Recent advances in hot working: Fundamental dynamic softening mechanisms[J].Journal of Applied Metalworking.1984(3) 被引量:1
  • 3Mao Weimin,Zhao Xinbing.Recrystallization and Grain Growth of Metallic Materials[]..1994 被引量:1
  • 4China Mechanical Industry Association.Turbine and hydro-generator shaft technical requirement. Industry Standard of People’s Republic of China. JB/T 1270-2002 . 2003 被引量:1
  • 5Sellars C M,Whiteman J A.Recrystallization and Grain Growth in Hot Rolling[].Journal of Materials Science.1979 被引量:1
  • 6Sellars C M.Modeling microstructural development during hot rolling[].Journal of Materials Science.1990 被引量:1
  • 7Beynon J H,Sellars C M.Modelling microstructure and its effects during multipass hot rolling[].ISIJ International.1992 被引量:1
  • 8E. Hornbogen,U. Koster.Recrystallization of Metallic Materials[]..1978 被引量:1
  • 9H. Yada.Prediction and control of mechanical properties of steels during hot rolling processing[].Journal of the Japan Society for Technology of Plasticity.1987 被引量:1
  • 10Ashok Kumar,Sudhakar Jha.Modeling the Microstructural Evolution During Hot Compression of Low Carbon Steel[].Steel Research.1993 被引量:1

共引文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部