摘要
本文以废水检测误差作为切入点,深入探讨废水检测项目中的误差问题形成原因,找准问题症结,梳理问题脉络。随后,立足问题成因,针对性提出多项检测质量控制方法。旨在建立起一套标准化的废水检测体系,严格把控废水检测过程,确保检测结果与水质情况无明显出入。同时,也为同类项目废水检测工作的开展提供参考。
Taking the wastewater detection error as the starting point,this paper deeply discusses the causes of the error problem in the waste-water detection project,finds out the crux of the problem,and sorts out the problem context.Then,based on the cause of the problem,a number of quality control methods for testing were put forward.It aims to establish a standardized wastewater detection system,strictly control the wastewater detection process,and ensure that there is no obvious difference between the detection results and the water quality.At the same time,it also provides reference for the development of wastewater detection in similar projects.
作者
孙光玲
丁刚
杜立
Sun Guangling;Ding Gang;Du Li(Guoneng Weizhen(Shandong)Testing and Analysis Co.,Ltd.,Shandong,250013)
出处
《当代化工研究》
2023年第7期46-48,共3页
Modern Chemical Research
关键词
废水检测
误差分析
加测质量
控制方法
wastewater detection
error analysis
additional test mass
control method
