期刊文献+

中国先进研究堆中子织构谱仪二维位置灵敏探测器数据分析与处理方法 被引量:1

Data Analysis and Processing Method for Two-dimensional Position Sensitive Detector of Neutron Texture Diffractometer at China Advanced Research Reactor
下载PDF
导出
摘要 中子织构谱仪在航空航天、交通、核工业等领域关键材料的织构研究中具有独特的优势。为了提升探测效率,中国先进研究堆中子织构谱仪在2020—2021年进行了升级改造,将探测系统从单个3He计数管升级为大尺寸二维位置灵敏探测器。本研究针对中国先进研究堆中子织构谱仪升级后的实验测量数据,提出了从二维位置灵敏探测器获得的衍射中子计数到织构极图转换的数据处理与分析方法,并基于该方法使用Python语言开发了中子织构数据处理和分析软件系统,对实际测量数据的应用验证了该软件系统的可靠性。该系统实现了二维位置灵敏探测器数据到极图数据的转换和极图绘制,满足了中子织构谱仪升级后的功能需求。 The neutron texture diffractometer has unique advantage in the texture research for the key materials in the fields of aerospace,transportation,nuclear industry and so on.In order to improve the detection efficiency,the detection system of the neutron texture diffractometer at China Advanced Research Reactor(CARR)has been upgraded from a single 3He counter tube to a large-area two-dimensional position sensitive detector during 2020-2021.However,due to the difference of configuration and hardware design of the neutron texture diffractometer at the major neutron scattering laboratories in the world,the formats of obtained experimental data are also different,which results in the significant difference of the data analysis and processing.Therefore,the new method and software should be proposed to analyze the experimental data collected from two-dimensional position sensitive detector of neutron texture diffractometer at CARR.The results of texture measurement using neutron texture diffractometer generally were represented by pole figure.The pole figure window resolution of the texture diffractometer is an important factor affecting the results of texture measurement.Due to the diffraction signal of larger range angles along the longitudinal direction(αdirection)can be detected by the two-dimensional position-sensitive detector,therefore,in order to meet the demand of texture measurement for resolution,the diffraction data should be firstly divided into several pieces in longitudinal direction to adjust theαdirection resolution of the pole figure window.Then,during data preprocessing,it is key to accurately obtain the integral intensity of the diffraction peak for getting an accurate pole figure.However,the position of diffraction peaks may shift slightly due to the possible eccentricity during sample installation and uneven background of diffraction spectrum caused by noise,which result in the inaccurate fitting results.Moreover,generally the massive experimental data were collected by the two-dimensional sensitiv
作者 朱桂杰 刘晓龙 田庚方 侯宇晗 王洪亮 于艳丽 薛耀辉 李玉庆 李眉娟 孙凯 陈东风 ZHU Guijie;LIU Xiaolong;TIAN Gengfang;HOU Yuhan;WANG Hongliang;YU Yanli;XUE Yaohui;LI Yuqing;LI Meijuan;SUN Kai;CHEN Dongfeng(China Institute of Atomic Energy,Beijing 102413,China;China International Engineering Consulting Corporation,Beijing 100048,China)
出处 《原子能科学技术》 EI CAS CSCD 北大核心 2023年第4期857-864,共8页 Atomic Energy Science and Technology
基金 国家财政部稳定支持研究经费(WDJC-2019-04) 中核集团领创科研计划(LC202309000301)。
关键词 中子织构谱仪 织构数据分析 二维位置灵敏探测器 极图 Python neutron texture diffractometer texture data analysis two-dimensional position sensitive detector pole figure Python
  • 相关文献

参考文献4

二级参考文献47

  • 1李眉娟,勾成,张百生,陈东风.材料织构的中子衍射测量[J].原子能科学技术,2004,38(z1):97-99. 被引量:3
  • 2赵文金,周邦新,苗志,彭倩,蒋有荣,蒋宏曼,庞华.我国高性能锆合金的发展[J].原子能科学技术,2005,39(B07):2-9. 被引量:95
  • 3彭倩,沈保罗.锆合金的织构及其对性能的影响[J].稀有金属,2005,29(6):903-907. 被引量:54
  • 4毛卫民 张新民.晶体材料织构定量分析[M].北京:冶金工业出版社,1995.. 被引量:49
  • 5BUNGE H J. Texture analysis by neutron dif- fraction[C] // VI International School on Neutron Physics. Alushta: [s. n.], 1990. 被引量:1
  • 6BROKMEIER H G. Neutron diffraction texture analysis of multi-phase systems[J]. Texture and Microstructures, 1989, 10(4): 325-346. 被引量:1
  • 7BUNGE H J. Advantages of neutron diffraction in texture analysis. Texture and Microstruc- tures, 1989, 10(4): 265-307. 被引量:1
  • 8BACON O E. Neutron diffraction[M]. Oxford: The Clarendon Press, 1975. 被引量:1
  • 9BUNGE H J. Texture analysis in materials sci- ence[M]. London: Butterworths Pub. , 1982. 被引量:1
  • 10ROGGE Y L, HOLT R A. Development of local microstructure and crystallographic texture in ex- truded Zr-2.5Nb tubes[J]. Materials Science and Engineering A, 2006, 437: 10-20. 被引量:1

共引文献7

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部