摘要
双馈感应发电机(DFIG)的简化建模对系统稳定性分析至关重要,现有建模方法往往只适用于单一时间尺度下某一具体问题的分析,缺乏对动态全过程仿真建模的研究。提出一种适用于动态全过程仿真的DFIG简化建模方法。根据多时间尺度模型简化原理建立DFIG各控制的动态模型和简化模型;从控制参数入手,提出两级轨迹灵敏度分析方法,研究在动态全过程仿真中主导DFIG输出特性的关键控制;提出一种模型切换控制策略,根据两级轨迹灵敏度分析结果,通过设置阈值建立可调节的模型切换判据,在动态全过程仿真中分时调用各控制的动态模型和简化模型,在保证模型精度的同时实现模型的降阶和简化。最后,通过仿真对比验证所提建模方法的有效性。
Simplified modeling of doubly-fed induction generator(DFIG)is essential for power system stability analysis.Existing modeling methods are often only applicable to the study of a specific problem in a single time scale,and there is a lack of research on full dynamic simulation modeling.A simplified DFIG modeling method suitable for dynamic full dynamic simulation is proposed.According to the principle of multi-time scale model simplification,the dynamic and simplified models of each control link of DFIG are established.Starting from the control parameters,a two-level trajectory sensitivity analysis method is proposed to study the key control links that dominate the DFIG output characteristics in the full dynamic simulation.A model switching control strategy is proposed.According to the results of the two-level trajectory sensitivity analysis,an adjustable model switching criterion is established by setting a threshold,and the dynamic model and simplified model of each control link are called in time-sharing in the full dynamic simulation.While ensuring the accuracy of the model,the order reduction and simplification of the model are realized.Finally,the effectiveness of the proposed modeling method is verified by the simulation comparison.
作者
张宇
秦文萍
曹锐
朱志龙
薛邵锴
王科
ZHANG Yu;QIN Wenping;CAO Rui;ZHU Zhilong;XUE Shaokai;WANG Ke(Shanxi Key Laboratory of Power System Operation and Control,Taiyuan University of Technology,Taiyuan 030024,China;Taiyuan Youteaoke Electronic Technology Co.,Ltd.,Taiyuan 030024,China)
出处
《电力自动化设备》
EI
CSCD
北大核心
2023年第4期114-120,共7页
Electric Power Automation Equipment
基金
国家自然科学基金资助项目(51777132)
山西省科技重大专项(20181102028)。
