摘要
伴随着国防工业、先进装备制造等领域的不断发展,人们对复合材料的应用要求不断提高.碳纤维增强复合材料因其具备高强度、轻量化、长寿命的特点,与该领域材料的使用要求产生了高度适配.但在实际应用过程中,碳纤维惰性表面与聚合物基体间的弱界面结合严重影响了复合材料优异性能的充分发挥.构建微尺度、多维度碳纳米管/碳纤维界面增强体系被认为是提高相间结合能力的有效技术手段.本文综述了化学气相沉积、电泳沉积、化学接枝、浸涂喷涂4种较为成功的构建路线,讨论了碳纳米管在碳纤维表面的差异化微观沉积形貌所对应的不同界面增强机理,探讨了界面增强体系对复合材料综合性能的影响,并对该体系未来的构建和研究方向进行了展望.
Carbon fiber reinforced composites(CFRP)have a broad application prospect in aerospace,military equipment and other fields because of their many excellent properties such as high strength and stability.However,the inert surface structure of carbon fiber(CF)seriously affects the load transfer efficiency with the matrix,which hinders the full play of the excellent performance of the composites.Therefore,the optimization and design of the interfacial structure between the two phases has become a hot research topic.Carbon nanotubes(CNTs)with excellent mechanical properties were deposited on the surface of CF to form a three-dimensional network hybrid structure with multiple orders of magnitude,thereby improving the interfacial bonding ability between the CF and the matrix.This paper introduces four process routes for the construction of cross-scale enhancement systems,including chemical vapor deposition(CVD),electrophoretic deposition(EPD),chemical grafting and dip-coating spraying process.The advantages,limitations and key process parameters of each method are summarized.The study of CVD method focuses on the influence of process parameters such as catalysts(type,morphology,concentration),growth time,treatment temperature,carbon source and carrier gas(type,mixing ratio,inlet speed)on the growth morphology(length,density,thickness)of CNTs.This method achieves the direct directional growth of CNTs on the CF surface,but the CF is affected by the pre-activation treatment,metal catalyst etching,and hightemperature environment,which leads to a significant decrease in its own strength.In the EPD method,the adjustment of key process parameters(applied voltage,energization time,electrode distance,and electrode shape)becomes the key to successful application of the EPD method.Although the EPD method is capable of producing textured CNT coatings or thin films on the CF,the weak van der Waals force bonding form and the“disorder”of deposition are the main pain points of this method.In the chemical grafting process,the reacti
作者
毕岚森
高凡川
张传琪
张达
丁瑞鑫
王勇
何燕
Lansen Bi;Fanchuan Gao;Chuanqi Zhang;Da Zhang;Ruixin Ding;Yong Wang;Yan He(College of Electromechanical Engineering,Qingdao University of Science and Technology,Qingdao 266061,China;Shandong Laboratory for Preparation and Application of High-performance Carbon Materials,Qingdao 266061,China;Shandong Collaborative Innovation Center of Intelligent Green Manufacturing Technology and Equipment,Qingdao 266061,China)
出处
《科学通报》
EI
CAS
CSCD
北大核心
2023年第5期495-509,共15页
Chinese Science Bulletin
基金
国家自然科学基金(52176076,51676103)
山东省泰山学者特聘专家工程经费(ts20190937)资助。
关键词
碳纳米管
碳纤维
界面增强
复合材料
沉积形貌
carbon nanotubes
carbon fiber
interface reinforcement
composites
deposition morphology
