摘要
为探究干气密封摩擦界面在变形全阶段的接触特性,基于分形接触理论及微观接触力学理论,充分考虑微凸体变形的3个阶段,通过余弦函数构建干气密封全阶段接触模型,并分别与GW模型、KE模型和ZMC模型三种经典接触模型及相关文献的试验数据作对比,验证本文中接触模型的合理性与正确性.最后对干气密封摩擦界面接触特性的主要影响因素进行探究.模型研究结果表明:干气密封摩擦界面的接触特性与分形维数、特征尺度及两表面的真实接触面积有关.接触特性与分形维数和两表面真实接触面积呈正相关,与特征尺度呈负相关.分形维数越大,接触载荷与接触刚度的数量级就越大,且接触载荷变化范围相对较大.当特征尺度每次以1个数量级递增时,接触载荷与接触刚度的变化范围较小,都在1个数量级内.
Dry gas seal is a new type of shaft end seal that uses slotted sealing technology for gas sealing,and it belongs to non-contact sealing technology.Because of its high sealing properties,it is widely used in some precision equipment,such as aerospace engines.The contact between the friction end faces of the dry gas seal usually occurs in the start and stop stage,but in actual situations,due to processing errors and external environment excitation,it also lead to local vibration contact between the dynamic and static rings,then cause friction vibration of the entire end face,and reduce the sealing performance of the dry gas seal.In the past,the research on the contact characteristics of dry gas seals used the research method from micro to macro.First,the contact model of the asperity was established,and then the contact of the asperity was equivalent to the entire contact interface through probability statistics.However,they only considered the complete elastic deformation stage and the complete plastic deformation stage in the research process,while ignoring the most complex elastic-plastic stage in the asperity deformation stage,and finally the established model was inconsistent with the experimental value and had a large error.In order to explore the contact characteristics of the dry gas seal friction interface in all stages of deformation,the fractal theory and the micro-contact mechanics theory with unique characterization were used in this study.In the variable elastic-plastic deformation stage,the contact model of the asperity deformation in all stages was established through the cosine function.The established model conformed to the continuous smooth deformation theory and realized the continuous smooth transition between complete elasticity and complete plasticity.Then,a full-stage contact model of the friction interface of the dry gas seal was established by the island area theory in the fractal theory.Then the established model was compared with three classical contact models,GW model,KE model and ZMC m
作者
杨小成
丁雪兴
陈金林
YANG Xiaocheng;DING Xuexing;CHEN Jinlin(School of Petrochemical Engineering,Lanzhou University of Technology,Gansu Lanzhou 730050,China)
出处
《摩擦学学报》
EI
CAS
CSCD
北大核心
2022年第6期1237-1245,共9页
Tribology
关键词
干气密封
分形理论
弹塑性阶段
接触模型
接触特性
dry gas seal
fractal theory
elastic-plastic stage
contact model
contact characteristics
