摘要
Photodetectors based on two-dimensional(2D) materials have attracted considerable attention because of their unique properties. To further improve the performance of self-driven photodetectors based on van der Waals heterojunctions, a conductive band minimum(CBM) matched self-driven SnS_(2)/WS_(2) van der Waals heterojunction photodetector based on a SiO2/Si substrate has been designed. The device exhibits a positive current at zero voltage under 365 nm laser illumination.This is attributed to the built-in electric field at the interface of the SnS_(2) and WS_(2) layer, which will separate and transport the photogenerated carriers, even at zero bias voltage. In addition, the Al_(2)O_(3) layer is covered by the surface of the SnS_(2)/WS_(2) photodetector to further improve the performance, because the Al_(2)O_(3) layer will introduce tensile stress on the surface of the 2D materials leading to a higher electron concentration and smaller effective mass of electrons in the films. This work provides an idea for the research of self-driven photodetectors based on a van der Waals heterogeneous junction.
作者
王祥骏
林钰恒
刘潇
邓煊华
贲建伟
俞文杰
朱德亮
刘新科
Hsiang-Chun Wang;Yuheng Lin;Xiao Liu;Xuanhua Deng;Jianwei Ben;Wenjie Yu;Deliang Zhu;Xinke Liu(College of Materials Science and Engineering,Institute of Microelectronics(IME),Guangdong Research Center for Interfacial Engineering of Functional Materials,Shenzhen University,Shenzhen 518060,China;State Key Laboratory of Functional Materials for Informatics,Shanghai Institute of Microsystem and Information Technology,Chinese Academy of Sciences,Shanghai 200050,China)
基金
Project supported by the National Natural Science Foundation of China (Grant Nos.61974144,62004127,and 12074263)
the Science and Technology Foundation of Shenzhen (Grant No.JSGG20191129114216474)
the “National” Taipei University of Technology–Shenzhen University Joint Research Program,China (Grant No.2020009)。
