摘要
为了解决烟用内衬纸上机时所受阻力较大,从而导致内衬纸易跑位、塞机等质量问题。通过调节烟用内衬纸的涂油量大小、内衬纸的压纹方式、在线涂抹石蜡水等方法,以此研究不同处理方法对内衬纸上机适应性的影响。结果表明:(1)动摩擦系数与涂油量呈显著负相关,在同一基纸上,涂油量越高,动摩擦系数越小,降幅可达12.7%;(2)预压纹会降低内衬纸动摩擦系数大小,降幅可达25.1%;(3)在线压纹会提高内衬纸动摩擦系数大小,增幅达15.2%;(4)涂抹石蜡水会大幅度提高内衬纸动摩擦系数大小,增幅达54.6%。预压纹内衬纸最大限度地降低了动摩擦系数,极大地改善内衬纸的上机适应性,为行业相关内衬纸的工业生产提供参考和借鉴。
To solve the quality problems of interlining paper such as easy to run and jam caused by the resistance when it is put on the machine,this paper studies the influence of different methods on the adaptability of interlining paper by adjusting the amount of oil and the way of embossing,and applying paraffin water on-line.The results show that:(1)On the same base paper,the higher the oil content,the smaller the dynamic friction coefficient,with a decrease of 12.7%;(2)Pre-embossing can reduce the dynamic friction coefficient of liner paper by 25.1%;(3)On-line embossing can increase the dynamic friction coefficient of liner paper by 15.2%;(4)The dynamic friction coefficient of the liner paper can be increased by 54.6%when paraffin water is applied.Pre-embossed interlining paper can reduce the dynamic friction coefficient to the greatest extent,improve the adaptability of interlining paper,and provide reference for the industrial production of interlining paper related to the industry.
作者
周枫
刘贤杰
黄壮鹏
陈东昱
李源章
刘晓晖
吉雄
凌孝存
Zhou Feng;Liu Xianjie;Huang Zhuangpeng;Chen Dongyu;Li Yuanzhang;Liu Xiaohui;Ji Xiong;Ling Xiaocun(Technology Center,Shenzhen Tobacco Industry Co.Ltd.,Shenzhen 518109,China)
出处
《湖南文理学院学报（自然科学版）》
CAS
2022年第4期65-68,77,共5页
Journal of Hunan University of Arts and Science(Science and Technology)
关键词
涂油量
压纹方式
石蜡水
动摩擦系数
oil quantity
embossing mode
paraffin water
dynamic friction coefficient
