摘要
提出采用玻璃纤维取代碳纤维用于小型表贴式永磁电机护套的方案,为此对一款实际生产中额定功率为11 k W、额定转速为6000 r·min^(-1)的小型表贴式永磁电机转子的保护工艺进行了研究.基于有限元法,采用Ansys软件分别对玻璃纤维无纬带和碳纤维2种护套材料进行转子结构强度和温度场仿真.结果表明,碳纤维护套的保护效果优于玻璃纤维护套,但玻璃纤维护套的散热性好于碳纤维护套,2种护套均能保证测试电机的结构安全.基于以上结果并考虑材料成本和工艺难易程度,认为采用玻璃纤维护套性价比更高.
Aiming at using glass fiber to replace carbon fiber for the small surface-mounted permanent magnet motor,this paper takes a practical small surface-mounted permanent magnet motor,with a rated power of 11 kW and a rated speed of 6000 r·min^(-1),as an example to study the rotor protection process.Based on the finite element method,the strength and temperature field of the rotor structure with both glass fiber weftless tape and carbon fiber sheath materials are simulated by Ansys.The simulation results show that the protection effect of carbon fiber sheath is better than that of glass fiber sheath,and the heat dissipation of glass fiber sheath is better than that of carbon fiber sheath.Both types of sheath can ensure the structural safety of the tested motor.Considering the above results as well as the differences in material cost and process difficulty,it is concluded that the glass fiber sheath has better cost performance in that it can reduce material cost and simplify production process.
作者
孔思琪
陈进华
仇一鸣
张驰
KONG Siqi;CHEN Jinhua;QIU Yiming;ZHANG Chi(Ningbo Institute of Materials Technology and Engineering,Chinese Academy of Sciences,Ningbo 315201,China;Ningbo Feishi Technology Co.,Ltd.,Ningbo 315800,China;Faculty of Mechanical Engineering&Mechanics,Ningbo University,Ningbo 315211,China)
出处
《宁波大学学报（理工版）》
CAS
2022年第4期40-45,共6页
Journal of Ningbo University：Natural Science and Engineering Edition
基金
国家自然科学基金青年基金(51807194)
宁波市“科技创新2025”重大专项(2019B10077)
宁波市自然科学基金(2019A610115)。
关键词
表贴式永磁电机
玻璃纤维无纬带
碳纤维
surface-mounted permanent magnet motor
glass fiber weftless tape
carbon fibre
