摘要
稳压器喷淋阀是压水堆核电机组的关键阀门之一,是唯一的核安全1级控制阀。基于大型先进压水堆三代核电机组电磁驱动角式比例喷淋阀研发过程中的总结,就电磁驱动型比例喷淋阀的设计要求给出明确说明,为实现该阀门国产化提供依据,也为业内电磁驱动控制阀提出建议作为交流。
Proportional spray valve of pressurizer is one of the key valves of PWR nuclear power unit,and it is the only nuclear safety level 1 control valve.Based on the summary of the research and development process of electromagnetic drive angle proportional spray valve for the third generation nuclear power unit of large advanced pressurized water reactor,this paper gives a clear explanation on the design requirements of electromagnetic drive proportional spray valve,which provides a basis for realizing the localization of this valve and puts forward some suggestions for the electromagnetic drive control valve in the industry as an exchange.
作者
盖旭辉
曹月秋
蒋晓红
阮思东
张庆奎
GAI Xu-hui;CAO Yue-qiu;JIANG Xiao-hong;RUAN Si-dong;ZHANG Qing-kui(China Nuclear Power Engineering Co.,Ltd.,Shenzhen 518124,Guangdong,China;Anshan Solenoid Valve Limited Liability Company,Anshan 114000,Liaoning,China)
出处
《阀门》
2022年第2期149-152,共4页
VALVE MAGAZINE
基金
国家科技重大专项“高温高调节性能电磁驱动角式控制阀”(2019ZX06004014)。
关键词
稳压器
比例喷淋阀
电磁驱动
控制阀
pressurizer
proportional spray valve
electromagnetic drive
control valve
