摘要
传统滤棒添加方式只适用于软质滤棒,目前一些不可分切的硬质滤棒功能段需要用于复合滤棒的生产中。针对硬质滤棒功能段没有合适添加方法的现状,结合滤棒复合的需求,设计了一种硬质滤棒添加系统。利用SolidWorks软件对硬质滤棒添加系统进行设计,包括装料装置、下料装置、负压传送装置等。采用ANSYS软件对下料装置进行碰撞动力学分析,并得到了弹簧端盖的受力状况。通过倍福TwinCAT软件完成PLC的程序控制,实现滤棒的连续上下料过程和添加功能。理论分析和实际测试结果表明该滤棒添加系统设计合理且实用。
The traditional filter rod addition method has only been suitable for soft filter rod,while at present,some hard and non-splitable filter rod functional sections need to be used in the production of composite filter rod.In view of the current situation that there was no suitable adding method for the functional section of hard filter rod,a hard filter rod adding system was designed according to the requirements of filter rod composite.SolidWorks software was used to design the hard filter rod adding system,including charging device,feeding device,negative pressure transfer device,etc.The impact dynamics of the blanking device was analyzed by ANSYS software,and the stress state of the spring end cover was also obtained.PLC program control was completed by Beckhoof’s TwinCAT software,and the continuous loading and unloading process and adding function of filter rod could be realized.Theoretical analysis and practical test results show that the design of filter rod adding system is reasonable and practical.
作者
彭三文
刘强
盛况
PENG Sanwen;LIU Qiang;SHENG Kuang(China Tobacco Hubei Industrial of Cigarette Material Co.,Ltd,Wuhan 430050,China)
出处
《包装学报》
2022年第1期86-92,共7页
Packaging Journal
基金
湖北省技术创新专项(重大专项)基金资助项目(2018AAA026)。
关键词
滤棒
柔性添加
连续上下料
控制系统
filter rod
flexible addition
continuous loading and unloading
control system
