摘要
根据金属橡胶材料内部构造特点和力学性能,将金属橡胶剪切力学模型分解为线性回复力、库仑摩擦力和非线性迟滞力三部分。首先通过对金属橡胶进行层状分解计算得到金属橡胶单一接触对的剪切刚度,结合内部线匝有效接触对数量随剪切变形过程的统计规律,进而得到各力学组成部分的表达式并建立金属橡胶层状剪切本构模型,最后通过金属橡胶支座的剪切试验验证该本构模型的准确性。研究表明:在剪切变形过程中,金属橡胶接触对存在接触分离过程,接触点数量基本保持不变;无预加压缩荷载时,金属橡胶层状剪切本构模型与试验结果吻合良好,具有较高的准确性和精度,可以辅助金属橡胶层状微观分析。
According to the internal structure characteristics of the metallic rubber(MR) specimen as well as its mechanical properties, the shear constitutive model was divided into three parts: linear restoring force, coulombs friction force and nonlinear hysteresis force. The metallic rubber was firstly decomposed into several layers, combined with the statistical law of the contact-pair number of inner turn during the shear deformation process, the shear stiffness of the single contact-pair of the metallic rubber was deduced. Then, the expressions of mechanical components were obtained, and the layered shear constitutive model of MR was established. Finally, the accuracy of the constitutive model was verified through the shear experimental test of MR isolators. The results showed that during the shearing process, the metallic rubber contact pair had a contact-separation process, and the number of contact points remained basically unchanged. At the beginning of the unloading stage, the error between the experimental results and the numerical results was small. The layered shear constitutive model agreed well with the results of shear test without pre-compression load. It was shown that the constitutive model had high accuracy and precision, which could be used to assist the lamellar microanalysis of metallic rubber.
作者
王辰宇
彭文昊
李素超
方庆贺
WANG Chenyu;PENG Wenhao;LI Suchao;FANG Qinghe(Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education,School of Civil Engineering,Harbin Institute of Technology,Harbin 150090,China;Department of Civil Engineering,Harbin Institute of Technology at Weihai,Weihai 264209,China)
出处
《工业建筑》
CSCD
北大核心
2021年第11期25-30,共6页
Industrial Construction
基金
国家重点研发计划项目资助(2018YFC0809400)
山东省自然科学基金面上项目资助(ZR2020ME247)。
关键词
金属橡胶
层状分解
剪切本构
预压缩荷载
剪切性能
metallic rubber
layered decomposition
shear constitutive model
pre-compression load
shear property
