摘要
采用臭氧对靛蓝染色后的尼龙56纤维进行脱色处理,探讨了各工艺条件对脱色效果和力学性能的影响,优化了臭氧脱色的工艺条件。结果表明:当臭氧处理时间为20 min、pH=9左右、纤维含湿量为20%时,尼龙56纤维力学性能保持良好且脱色效果最佳。
The indigo dyed nylon 56 fiber is decolorized by ozone.The effects of the process conditions on the decolorization effect and mechanical properties are discussed,and the ozone decolorization process is opti⁃mized.The results show that when the ozone treatment time is 20 min,the pH is about 9,and the moisture content of the fiber is 20%,the mechanical property of the PA56 fiber remains well and the decolorization ef⁃fect is the best.
作者
彭朋
吴梦雷
朱豆豆
郝新敏
易长海
PENG Peng;WU Menglei;ZHU Doudou;HAO Xinmin;YI Changhai(Technology Institute,National Engineering Laboratory for Advanced Yarn and Fabric Formation and Clean Production,Wuhan Textile University,Wuhan 430200,China;Institue of Quartermaster Engineering&Technology,Systems Engineering Institute,Academy of Military Sciences,Beijing 100010,China)
出处
《印染》
CAS
北大核心
2022年第3期39-42,共4页
China Dyeing and Finishing
基金
国家自然科学基金(U1808211)
辽宁省科学技术基金(2019JH1/10100010)。
关键词
脱色
臭氧
尼龙56
decolorization
ozone
PA56
