摘要
为了掌握铝合金加筋板角接焊过程的温度响应和结构响应,基于顺序耦合法开展了5 083铝合金加筋板角接焊的数值模拟,其中采用了双椭球热源模拟MIG焊的热输入,并通过生死单元法模拟焊料填充,较精确地模拟了铝合金MIG焊的焊接过程。数值结果较好地反映了铝合金角接焊时结构的温度变化特征,残余应力计算结果表明:焊缝处的最大焊接残余应力与材料屈服限相当;不同约束方式下的焊接残余应力分量的峰值差异很小,沿焊缝中心和板中线的残余应力分布也基本一致。
In order to obtain the temperature field and structural response of aluminum alloy fillet-joint during the welding process, the numerical simulation of fillet welding of 5083 AL stiffened plates was carried out based on the sequential coupling method, in which the double ellipsoid heat source and the birth and death element method was adopted to simulate the MIG welding heat input and the solder filling respectively. The adopted numerical method would be useful to simulate the MIG welding process of aluminum alloy accurately. The numerical results reflect the temperature variation characteristics of aluminum alloy structure during fillet welding. The results of residual stresses show that the maximum welding residual stress at the weld is equivalent to the material yield limit, and the peak values of welding residual stress components under different restraint condition, have little difference and the distribution of residual stress along the weld center and plate center line are basically consistent.
作者
李陈峰
金腾龙
刘德怀
张一凡
刘涛
LI Chen-feng;JIN Teng-long;LIU De-huai;ZHANG Yi-fan;LIU tao(College of Shipbuilding Engineering,Harbin Engineering University,Harbin 150001,China)
出处
《舰船科学技术》
北大核心
2021年第12期71-75,共5页
Ship Science and Technology
基金
黑龙江省自然科学基金资助项目(LH2020E078)
国家自然科学基金资助项目(52171305)。
关键词
铝合金
焊接模拟
热源模型
温度场
残余应力
aluminum alloy
welding simulation
heat source model
temperature field
residual stress
