摘要
Porous particle flow is universal in nature and industry.However,in previous numerical simulations,porous particles have usually been assumed to be solid.It is necessary to study the flow and heat-transfer characteristics around porous particles because they are greatly different from those of impermeable particles.In this study,two-dimensional steady flow and heat transfer around and through a porous particle with a constant temperature placed in a cold fluid were numerically investigated.The effects of the Reynolds number(Re)and Darcy number(Da)on the flow and heat-transfer characteristics were investigated in detail.The investigated ranges of the parameters were 10≤Re≤40 and 10^(−6)≤Da≤10^(−2).It is sophisticated to simulate porous particles with traditional simulation methods because of their complicated structure.Therefore,the lattice Boltzmann method was used to solve the generalized macroscopic governing equations because of its simplicity.The drag coefficient decreased with increasing Re or Da,but the decrease was not prominent in the range 10^(−6)≤Da≤10^(−4).The heat-transfer efficiency of the front surface was much stronger than that of the rear surface.The heat-transfer efficiency between the particle and the fluid increased with increasing Re or Da.However,for 10^(−6)≤Da≤10^(−4),the increase was not prominent and the heat-transfer enhancement ratio was slightly larger than one.Furthermore,the effect of Da became more prominent at larger Re.In addition,new correlations for the drag coefficient and surface-averaged Nusselt number were obtained based on the simulated results.
基金
supported by the National Natural Science Foundation of China(grant No.51922086).
