摘要
为提高现场多点冲击电流测试效率,设计一种便携式冲击电流测量装置。根据典型冲击电流波形的频谱分析,设计带磁芯的罗氏线圈冲击电流传感器,灵敏度为3 mV/A,采用FPGA作为数字逻辑处理单元,选用采样率高达65 MSPS的12位A/D转换器,利用两级FIFO实现全波实时测量及本地存储,现场显示电流幅值与上升时间。测量装置体积小,质量轻,便于携带。经过8/20μs典型冲击电流测试,测量精度达到±3%,测量幅值范围为0.5~5 kA。
In order to improve the efficiency of field multi⁃point impulse current test,a portable impulse current measuring device was designed.According to the spectrum analysis of the typical impulse current waveform,the sensor based on Rogowski coil with magnetic core was designed,whose sensitivity was 3 mV/A.FPGA was used as the digital logic processing unit,and the 12-bit A/D converter with the sampling rate up to 65 MSPS was selected.Two⁃stage FIFO realized full⁃wave real⁃time measure⁃ment and local storage,and displayed the current amplitude and rise time on site.The measuring device is small,light and easy to carry.After the test of 8/20μs typical impulse current,the measurement accuracy of the device reaches±3%,and the measure⁃ment amplitude range is 0.5~5 kA.
作者
施政远
徐雁
李文婷
徐晓东
SHI Zheng-yuan;XU Yan;LI Wen-ting;XU Xiao-dong(Scool of Electrical and Electronic Engineering,Huazhong University of Science and Technology,Wuhan 430074,China;Measurement Research Institute,China Electric Power Research Institute,Wuhan 430074,China)
出处
《仪表技术与传感器》
CSCD
北大核心
2021年第10期42-46,共5页
Instrument Technique and Sensor
基金
中国电力科学研究院基金研究项目(JL83-20-009)。
关键词
冲击电流
FPGA
电流测量
高速采集
带磁芯的罗氏线圈
现场测试
impulse current
FPGA
current measurement
high speed acquisition
Rogowski coil with magnetic core
field test
