摘要
核反应堆堆芯吊篮的振动状态直接关系到堆芯的安全运行,但堆芯吊篮处于高温和强辐照环境下,无法直接在吊篮上布置传感器测量其振动。本文利用安装在压力容器上的加速度计间接监测吊篮的振动,通过对多核电机组压力容器振动信号相干谱、自功率谱和互功率谱进行分析,获得吊篮壳型振动频率和振幅,并将分析结果与秦山核电厂二期1号机组试验实测值进行比较,分析结果与试验结果相近。研究表明通过对压力容器振动信号的监测与分析,能够有效识别堆芯吊篮壳型振动特性,为吊篮状态评价提供基础。
The vibration state of reactor core barrel is directly related to the safe operation of the core.However,the barrel is under high temperature and high radiation conditions,so it is impossible to measure the barrel vibration by a sensor directly installed on the barrel.In this paper,the accelerometer installed on the pressure vessel is used to indirectly monitor the barrel vibration.The coherence spectrum,auto-power spectrum and cross-power spectrum of vibration signal of pressure vessel with multiple nuclear units are analyzed to provide the shell mode vibration frequency and amplitude of the barrel.As shown by comparison,the analysis results approximate to the measured values from the test of Qinshan NPP Phase II Unit 1.The study results show that the shell mode vibration characteristics of the core barrel can be effectively identified by the monitoring and analysis of the pressure vessel vibration signals,which provides a foundation for the evaluation of the core barrel conditions.
作者
罗婷
杨泰波
刘才学
罗能
胡建荣
简捷
冯晋涛
Luo Ting;Yang Taibo;Liu Caixue;Luo Neng;Hu Jianrong;Jian Jie;Feng Jintao(Nuclear Power Institute of China,Chengdu,610213,China)
出处
《核动力工程》
EI
CAS
CSCD
北大核心
2021年第5期134-137,共4页
Nuclear Power Engineering
关键词
堆芯吊篮
振动信号
壳型振动
频率
振幅
Core barrel
Vibration signal
Shell mode vibration
Frequency
Amplitude
