摘要
中国四大名陶之一的坭兴陶市场需求日益增长,但是其浮雕工艺的手工生产率低下,无法满足高效生产要求。本文结合市场需求,设计了一款陶瓷智能浮雕机。根据坭兴陶浮雕工艺的特点,机械结构设计为四轴联动。本设计采用Mach3软件作为PC机控制软件,通过Mach3控制板与机械结构连接,并通过位置传感器形成闭环控制,使用ArtCAM软件将雕刻图案矢量图转换为浮雕的曲面图,并生成加工代码,最后通过实例验证了浮雕机设计的正确性和可行性。
The market demand for Nixing pottery,one of the four famous potteries in China,is growing day by day,but the manual productivity of its relief craftsmanship is low,which cannot meet the requirements of efficient produc⁃tion.This paper designed a ceramic intelligent relief machine based on market demand.According to the characteris⁃tics of Nixing pottery relief craftsmanship,the mechanical structure was designed for four-axis linkage.This design used Mach3 software as the PC control software,connected with the mechanical structure through the Mach3 control board,and formed a closed-loop control through the position sensor,used the ArtCAM software to convert the engrav⁃ing pattern vector diagram into a relief surface diagram,and generated the processing code,finally verified the cor⁃rectness and feasibility of the relief machine design through an example.
作者
黎泉
朱艳
贾广攀
吴甲兰
LI Quan;ZHU Yan;JIA Guangpan;WU Jialan(College of Mechanical and Marine Engineering,Beibu Gulf University,Qinzhou Guangxi 535011;Qinzhou Science and Technology Development Center,Qinzhou Guangxi 535000;Guangxi Qinzhou Fangyuan Nixing Ceramic Art Co.,Ltd.,Qinzhou Guangxi 535000)
出处
《河南科技》
2021年第9期72-74,共3页
Henan Science and Technology
基金
钦州市科学研究与技术开发计划项目(202014837)。
