摘要
对IN718合金进行二次固溶处理,研究了二次固溶处理对其组织及高温拉伸性能的影响。结果表明,经二次固溶处理后,IN718合金组织中δ相含量较一次固溶增加,高温屈服强度降低。随二次固溶温度升高,δ相析出减少,高温屈服强度升高.
Effect of secondary solid solution treatment on microstructure and high temperature tensile property of the IN718 alloy was investigated.The results show that compared with primary solid solution treatment,the content of δ phase in the IN718 alloy increases and the high temperature yield strength decreases after the secondary solid solution treatment.With the increase of secondary solid solution treatment temperature,the δ phase precipitation decreases,the high temperature yield strength increases.
作者
项春花
王攀智
杨旭
安世毫
Xiang Chunhua;Wang Panzhi;Yang Xu;An Shihao(Guizhou Aviation Technical Development Co.,Ltd.,Guiyang Guizhou 550081,China)
出处
《金属热处理》
CAS
CSCD
北大核心
2021年第6期132-134,共3页
Heat Treatment of Metals
关键词
IN718合金
二次固溶处理
组织
性能
IN718 alloy
secondary solid solution treatment
microstructure
properties
