摘要
本文主要详细介绍了基于西门子S7-1500系列PLC的S7通信协议,以及如何在TIA Portal平台上组态设置,使用S7通信协议让两台配置西门子S7-1500系列PLC的冲压设备在不增加成本的基础上,可以直接互相读取和写入所需要的相关数据,从而达到双方编程的目的。
The S7 communication protocol based on Siemens S7-1500 series PLC has been mainly introduced in detail in the text,as well as the way to configure settings on the TIA Portal platform.The S7 communication protocol has been adopted to make two stamping equipment equipped with Siemens S7-1500 series PLC can directly read and write the relevant data required by each other without increasing the cost,so as to achieve the purpose of programming by both parties.
作者
沈盛阳
陈峰
SHEN Shengyang;CHEN Feng(Jiangsu YangH Group Co.,Ltd.,Yangzhou 225000,Jiangsu China;SUMEC Group Corporation,Nanjing 210018,Jiangsu China)
出处
《锻压装备与制造技术》
2021年第2期57-59,共3页
China Metalforming Equipment & Manufacturing Technology
