摘要
在许多工程的项目上都会用到大量的数据,并要求测量出的数据精准,因为有时候一点小误差都会对结果造成一定的影响。但仪器仪表测量的误差是客观存在的,只能减小而无法被彻底消除。本文主要分析了仪器仪表测量出现误差的原因以及减小测量误差的措施,在测量的过程中可能造成测量误差的因素有很多,这就要求测量人员提高专业能力,尽量减小测量的误差,提高测量的准确性。
A large amount of data is used in many engineering projects,and the measured data is required to be accurate,because sometimes a little error will have a certain impact on the results.However,the measurement errors of instruments and meters exist objectively,which can only be reduced but cannot be eliminated completely.This paper mainly analyzes the causes of errors in instrument measurement and measures to reduce measurement errors.There are many factors that may cause measurement errors in the process of measurement,which requires surveyors to improve their professional ability,minimize measurement errors and improve measurement accuracy.
作者
张瑞
史吉隆
邢明磊
Zhang Rui;Shi Jilong;Xing Minglei(Shenyang Blower Group Co.,Ltd.,Liaoning,110869)
出处
《当代化工研究》
2021年第4期63-64,共2页
Modern Chemical Research
关键词
仪器仪表
测量误差
因素
instruments and meters
measurement error
factor
