摘要
并联电容器装置投切试验是检测其质量的一项重要试验,该项试验综合考量了并联电容器装置的整体性能。但受限于试验条件,目前无法有效地在实验室中进行。为此提出两种实验室条件下的试验方案,通过仿真验证了两种试验回路的一致性,结合试验验证,分析了并联电容器装置在投切过程中出现的冲击电流、涌流和残余电压,可为实验室实施投切试验提供参考。
The switching test of shunt capacitoris an important test to check quality of the capacitor and the test considers comprehensively the overall performance of the device.However,it cannot be tested in the laboratory at present due to the limit of test condition.Therefore,two kinds of test schemes under laboratory conditions are proposed in this paper,the consistency of the two test circuits is verified and,with combination of test verification,the impulse current,inrush currentand residual voltage occurringduring the switching of shunt capacitor are analyzed so to provide reference for implementing the switching test in the laboratory.
作者
盖斌
蔡俊
赵亮
高超
GAI Bin;CAI Jun;ZHAO Liang;GAO Chao(Xi’an High Voltage Apparatus Research Institute Co.,Ltd.,Xi’an 710077,China)
出处
《电力电容器与无功补偿》
北大核心
2020年第6期1-7,共7页
Power Capacitor & Reactive Power Compensation
关键词
并联电容器装置
投切试验
涌流
残余电压
仿真
shuntcapacitor
switchingtest
inrushcurrent
residualvoltage
simulation
