期刊文献+

带暗柱的高层剪力墙结构动力性能研究

Study on Dynamic Performance of High Rise Shear Wall Structure with Concealed Columns
下载PDF
导出
摘要 对带暗柱的高层剪力墙结构动力性能进行研究.通过模态分析、风荷载计算和绘制滞回曲线分析带暗柱剪力墙结构在各种工况下的内力、应力和位移;在设计参数基础上,改变截面配筋率,研究暗柱结构的破坏形态和耗能能力.研究表明,随着暗柱纵筋直径增大,应力水平和耗能能力均有不同程度的增强,带暗柱剪力墙结构动力性能相比于普通剪力墙有所提高,最后本文给出带暗柱的剪力墙承载力计算方法. In this paper,the dynamic behavior of high-rise shear wall structure with concealed columns is studied.Wind load calculation and drawing hysteretic curve,the internal force,stress and displacement of shear wall structure with concealed column under various working conditions are analyzed through modal analysis.Based on the design parameters,the method of changing section reinforcement ratio is adopted to study the failure mode and energy dissipation capacity of the structure.The finding is that the stress level and energy dissipation capacity are strengthened with the increase of the diameter of the longitudinal reinforcement of the concealed column and the dynamic performance of the shear wall with concealed column is improved compared with that of the common shear wall.
作者 王建省 李泽洲 陈晓强 WANG Jianxing;LI Zezhou;CHEN Xiaoqiang(College of Civil Engineering,North China Univ.of Tech.,100144,Beijing,China)
出处 《北方工业大学学报》 2020年第5期106-111,共6页 Journal of North China University of Technology
基金 国家自然科学基金面上项目“力/热/光压多场耦合的太阳帆航天器框架-薄膜结构定性研究”(11572001) 国家自然科学基金面上项目“复式钢管混凝土钢梁节点设计方法及节点性能控制研究”(51478004).
关键词 剪力墙 暗柱 有限元 高层建筑 滞回曲线 shear wall concealed columns finite element high-rise hysteretic curve
  • 相关文献

参考文献8

二级参考文献53

  • 1JGJ101-1996,建筑抗震试验方法规程[S].北京:中国建筑工业出版社,1997 被引量:102
  • 2.GB50010-2002混凝土结构设计规范[S].北京:中国建筑工业出版社,2002.. 被引量:504
  • 3郭家耀,郭伟邦,徐卫国,刘鹏,汪洋,何伟明.中国国际贸易中心三期主塔楼结构设计[J].建筑钢结构进展,2007,9(5):1-6. 被引量:16
  • 4Wright H D, Oduyemi T, Evans H R. The experimental behaviour of double skin composite elements [ J ]. Journal of Constructional Steel Research, 1991,19(2) :97-110. 被引量:1
  • 5Wright H D, Oduyemi T, Evans H R. The design of double skin composite elements [ J ]. Journal of Constructional Steel Research, 1991,19 (2) : 111-132. 被引量:1
  • 6Takeda T, Yamaguchi T, Nakayama T, et al. Experimental study on shear characteristics of a concrete filled steel plate wall [ C ]// Transactions of the 13th International Conference on Structural Mechanics in Reactor Technology. Porto Alegre, Brazil, 1995:3-14. 被引量:1
  • 7Ozaki M, Akita S, Osuga H, et al. Study on steel plate reinforced concrete panels subjected to cyclic in-plane shear [ J ]. Nuclear Engineering and Design, 2004,228 ( 1 ) : 225-244. 被引量:1
  • 8Usami S, Akiyama H, Narikawa M, et al. Study on a concrete filled steel structure for nuclear power plants ( part 2). Compressive loading tests on wall members [ C ]// Transactions of the 13th International Conference on Structural Mechanics in Reactor Technology. Porto Alegre, Brazil, 1995:21-26. 被引量:1
  • 9Akita S, Ozaki M, Niwa N, et al. Study on steel plate reinforced concrete bearing wall for nuclear power plants (part 2 ). Analytical method to evaluate response of SC wails [ C ]// Transactions of the 16th International Conference on Structural Mechanics in Reactor Technology. Washington DC, 2001. 被引量:1
  • 10Takeuchi M, Narikawa M, Matsuo I, et al. Study on a concrete filled structure for nuclear power plants [ J ]. Nuclear Engineering and Design, 1998,179(2) :209-223. 被引量:1

共引文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部