期刊文献+

Tillage force and disturbance characteristics of different geometric-shaped subsoilers via DEM 被引量:1

原文传递
导出
摘要 With the increased use of agricultural machinery in field operations,soil compaction has become increasingly severe,and the plough pan has become deeper.Subsoiling is an excellent way to address this problem.However,it is limited by high energy consumption,which is closely related to tillage force.To investigate the effect of the geometric shape of shanks and tines on tillage force and soil disturbance in loam,a layered soil model in accordance with the actual conditions was established and five different subsoilers were simulated via discrete element modeling.The results indicated that the shank impacted soil disturbance and tine impacted tillage force.The draft force of curved shank and chisel tine was 8%less than that of the straight shank and sweep tine.The straight shank and sweep tine produced a larger furrow profile and a higher furrow width.The subsoiler with curved shank and chisel tine(C-C)exhibited the lowest specific resistance(12.87,17.52,19.46 and 21.18 kN/m^2 in the 30,35,40 and 45 cm tillage depth,respectively)considering the draft force and soil disturbance characteristics.Hence,these results will facilitate in the selection of a suitable subsoiler and design of new subsoilers with lower energy consumption requirements for loam areas worldwide.
出处 《Advances in Manufacturing》 SCIE CAS CSCD 2020年第3期392-404,共13页 先进制造进展(英文版)
基金 This study was financially supported by the National Key R&D Program of China(Grant No.2017YFD0701103) the EU H2020 Program(FabSurfWAR No.644971) the 111 Project(Grant No.B16020)of China,the National Natural Science Foundation(Grant No.51805338) the China Scholarship Council,China(CSC).
  • 相关文献

参考文献5

二级参考文献85

共引文献343

同被引文献15

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部