摘要
Seabed fluid escape is active in the Makran subduction zone,Arabian Sea.Based on the new highresolution 2D seismic data,acoustic blanking zones and seafloor mounds are identified.Acoustic blanking zones include three kinds of geometries:Bell-shaped,vertically columnar and tilted zones.The bellshaped blanking zone is characterized by weak and discontinuous reflections in the interior and upbending reflections on the top,interpreted as gas chimneys.Vertically columnar blanking zone is interpreted as side-imaged gas chimneys associated with focused fluid flow and topped by a seafloor anomaly expressed as a localized reflection discontinuity,which may together serve as a vent structure.Tilted acoustic blanking zone could be induced by accretionary thrust activity and rapid sedimentation surrounding slope.Seafloor mounds occur at the sites of bell-shaped acoustic blanking zone and may be associated with the material intrusion.Bottom simulating refectors(BSRs)are widely distributed and exhibit a series of characteristics including diminished amplitude,low continuity as well as local shoaling overlapping with these acoustic blanking zones.The large amount of gases dissociated from the gas hydrates migrated upwards and then arrived at the near-seafloor sediments,followed by the formation of the gas hydrates and hence the seafloor mound.
基金
This work was financially supported by the Laboratory for Marine Mineral Resources,Qingdao National Laboratory for Marine Science and Technology(MMRKF201810)
the National Natural Science Foundation of China(41606077)
This work was also financially supported by the China Geological Survey(DD20190582,DD20191009,DD20160214).
