期刊文献+

Evaluation of Mixture Performance Recycled Asphalt Pavement Materials as Base Layer with or without Rejuvenator into the Asphalt 被引量:4

下载PDF
导出
摘要 The binder properties were determined in accordance with Chinese standard such as ductility test, which allowed to measure the distance in centimeters that a standard briquette of asphalt had been stretched before breaking. Then, penetration test was carried out in order to know some properties of the asphalt, which are the hardness and the softness. Finally, softening point test was carried out in order to determine the temperature at which the bitumen attains a particular degree of softening under the specification of the test. According to Chinese standard for performance tests, firstly, Marshall test was carried out in order to measure the theoretical density, air voids, voids filled with asphalt, stability, flow, and voids in mineral aggregate of asphalt specimens. Secondly, Freeze-thaw splitting test was carried out in order to determine Splitting strength ratio. Finally, dynamic stability (rutting) test was carried out to determine average dynamic stability. Beside the tests carried out, the gradation of the extracted aggregate in accordance with American Association of State Highway and Transportation Officials was carried out to determine the dimensions of the particles weight distribution. Furthermore, both the percentage of recycled asphalt pavement materials and binder in mixture were determined to know how much of the new material during the mixture was needed. However, two specimens were used to evaluate the performance of recycled asphalt pavement materials. One specimen of recycled asphalt pavement materials was ten years old, and another one of recycled asphalt pavement materials was five years old. The results show that the conditions of the environment such as moisture, temperature, and age, decrease the ductility and penetration properties of binder when increase the softening point property of binder. Then the gradation of recycled asphalt pavement aggregate is of the required values to reuse in the mixture, while the flow ratio, the splitting strength ratio, and the dynamic stability ratio,
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2020年第3期579-597,共19页 武汉理工大学学报(材料科学英文版)
基金 Funded by the Technology Research and Development Plan Program of Heilongjiang Province(No.GA19A501)。
  • 相关文献

参考文献5

二级参考文献29

  • 1Prithvi S Kandhal,Rajib B Mallick. Develops New Generation Open-graded Asphalt Friction Course[R].America: NCTA Report,2001. 被引量:1
  • 2JTJ052-2000.公路工程沥青及沥青混合料试验规程[S].[S].,.. 被引量:958
  • 3W. H. Campen, J. R. Smitk L. G. Erickson and L. R. Mertz.The Relationships Between Voids, Surface Area, Film Thickness and Stability In Bituminous Paving Mixtures[J]. Proceedings,AAPT,1959,28. 被引量:1
  • 4J. F. Goode and L. A. Lufscy. Voids, Permeability, Film Thickness vs. Asphalt Hardening[J]. Proceedings, AAPT,1965, 34. 被引量:1
  • 5A. Kumar and W. H. Goetz Asphalt Hardening as AtTected by Film Thickness, Voids and Permeability in Asphaltic Mixtures[J]. Proceedings, AAPT, 1977,46. 被引量:1
  • 6交通部公路科学研究所.公路工程沥青及沥青混合料试验规程[S].北京:人民交通出版社,1993.. 被引量:1
  • 7Brown ER, Haddock JE, Mallick RB, Lynn TA (1997) Devel- opment of a mixture design procedure for stone matrix asphalt(SMA). Report No. 97-03, National Center for Asphalt Tech- nology, Auburn University, Alabama, US. 被引量:1
  • 8AASHTO (1990) Report on the 1990 European asphalt tour. AASHTO Report, Washington DC, US. 被引量:1
  • 9Brown ER (1992) Evaluation of SMA used in Michigan (1991). Report No. 93-03, National Center for Asphalt Technology, Auburn University, Alabama, US. 被引量:1
  • 10Qiu YF, Lum KM (2006) Design and performance of stone mastic asphalt. J Transp Eng 132(12):956-963. doi:10.1061/ (ASCE)0733-947X(2006) 132:12(956). 被引量:1

共引文献62

同被引文献21

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部